Anderson Metals - 56123-0806 Messing pijpfitting, verloop zeskantnippel, 1/2 mannelijke pijp x 3/8 mannelijke pijp 1/2 x 3/8 1

Brand:Anderson Metals

3.6/5

29.31

De Anderson Metals reduceerzeskantnippelpijpfitting is gemaakt van messing en heeft mannelijke National Pipe Taper (NPT) schroefdraadverbindingen. Deze zeskantnippelfitting heeft een uiteinde dat kleiner is dan het andere uiteinde voor het verbinden van twee buizen met schroefdraad met verschillende diameters, en heeft een zeskantige kop voor een groter draagoppervlak bij het afstellen van de fitting met een sleutel. Het heeft mannelijke NPT-schroefdraad voor aansluiting op buizen met binnendraad, waardoor een strakkere afdichting ontstaat dan rechte schroefdraad. Deze fitting is gemaakt van messing voor corrosiebestendigheid, ductiliteit bij hoge temperaturen en lage magnetische permeabiliteit. Messing kan worden verbonden met koper, messing, kunststof, aluminium en gelast staal. De bedrijfstemperaturen voor deze fitting variëren van -53 tot 121 graden C (-65 tot 250 graden F). Deze fitting voldoet aan de specificaties van de American Society for Testing and Materials (ASTM) B584 en American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 voor kwaliteitsborging. het veranderen van de richting van leidingen in veel verschillende industrieën. Houd bij het kopen van buisfittingen rekening met de toepassing, aangezien dit van invloed is op het materiaaltype, de vorm, de maat en de vereiste duurzaamheid. Fittingen zijn verkrijgbaar met of zonder schroefdraad, in vele vormen, stijlen, maten en schema's (wanddikte van de pijp). Anderson Metals produceert messing fittingen, kleppen en pijpnippels. Het bedrijf, opgericht in 1951, heeft zijn hoofdkantoor in Kansas City, MO.

EAN: 0719852920380

Categorieën Industrieel & Wetenschappelijk,

Deze fittingen bevatten lood en mogen volgens de federale wetgeving niet worden geïnstalleerd voor drinkwatergebruik in de VS en zijn territoria. Opmerking: raadpleeg de maattabel voor buizen of schroefdraad voordat u bestelt. Voldoet aan specificaties ASTM B584 en ASME/ANSI B16 voor kwaliteitsborging. Bedrijfstemperaturen variëren van -53 tot 121 graden C (-65 tot 250 graden F). Messing voor corrosieweerstand, ductiliteit bij hoge temperaturen en lage magnetische permeabiliteit. Mannelijke National Pipe Taper (NPT) schroefdraad voor aansluiting op vrouwelijke schroefdraadpijpen, Verloop zeskantige nippel voor aansluiting van twee schroefdraadpijpen met verschillende diameters. Opmerking: de maten van buisfittingen zijn gebaseerd op de nominale buismaat. Om de juiste maat te bepalen, meet u de buitendiameter van de schroefdraad en selecteert u de pijpmaat die overeenkomt met de buitendiameter van de schroefdraad. maat op de Pipe Fitting Maattabel.
Brand Anderson Metals
Color Brass
Connector Type Nipple
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number 56123-0806
Item Weight 0.11 Pounds
Manufacturer Anderson Metals
Material Brass
Number of Pieces 1
Package Dimensions 3.58 x 2.36 x 1.46 inches; 1.76 Ounces
Size 1/2" x 3/8"
Thread Type Connecting to Female Threaded Pipes

3.6

13 Review
5 Star
75
4 Star
12
3 Star
6
2 Star
2
1 Star
6

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Wilson
EXACTLY WHAT I AM LOOKING FOR
This is exactly what I am looking for. Very satisfy.
Scritto da: Octavius
Perfect for Weber Grill or Ooni pizza oven
I got my Weber Genesis II grill setup the other day, then realized the quick connect it comes with is not ready to attach to my stub. God knows why they do this, but they send you a quick connect with 3/8 female NPT threads, when most homes have female 1/2. Why they don't ship it with a 1/2 male connection is a mystery. I remember 2 years ago when I bought my dad his grill that he had the same issue, but assumed at the time it was because their house was 40 years old and nonstandard. So anyway, I ordered this and some Teflon/PTFE tape for same day delivery, since weirdly no one in town stocks this connector. Make sure not to use the white stuff, it's way too thin and would require too many wraps to make a proper seal. Technically if you're following code, you'd need pink since it's spec for gas piping with 1/2" threads and over, but I'm sure yellow would be fine. The yellow stuff is cheaper at your local hardware store, but I just got my tape with the connector since it wasn't worth an extra trip (and no one in town stocked pink). Once I got it in and taped up both sets of threads, I screwed it tight into the Weber quick connect, then screwed the quick connect to my gas stub. After that I checked it for leaks with soapy water just to be safe and fired up my grill. It's much more compact that Webers suggested black iron pipe, and looks a lot cleaner too. I know this is an issue for the Genesis II grills, but I assume you'll need one for the new Genesis as well. My dad also got an Ooni natural gas pizza oven and faced the same situation, so if you have one of those you'll probably need this part as well.
Scritto da: Stephen
Good
Good
Scritto da: Blake3
Well made
Seemed like a well made part, although received wrong size
Scritto da: Amazon Customer
Good quality.
Got the job done, would recommend
Scritto da: Pam Kirkendall
Must have part for Weber Grill Natural Gas Hookup!!
Purchased a Weber Spirit II Natural Gas Grill. This part is essential to attach to the “quick release” hose that comes with the grill to then attach to the shutoff valve. DO NOT try to use a reducer that had a “flanged” end. It will NOT work.
Scritto da: Kennedy
Perfect fit for connecting my NG grill
Purchased this adapter to convert the 1/2” gas line connector from my house to the 3/8” gas line from my Weber Genesis grill. Easy to install and was a perfect fit. Tested the connections and no signs of leaking.
Scritto da: Kathy
Poorly machined
The 1/4” side is fine but the 3/8” side wasn’t fully machined so the threads won’t catch the female end I’m trying to connect. I’ve even used other 3/8” fitting to make sure it’s the correct size, and they all connect perfect. But this one just keeps turning and won’t catch.
Scritto da: L. Baydak
Machining defect.
There was a ridge line crossing all the threads on the 1/2" NPT part of the fitting. In the photo you can see a dark like running down the centre of the bright illuminated stripe. I suspect that it was a manufacturing defect (from a die maybe?). I can feel it catching my fingernail. Anyway. The fitting is scrap, since it would be near impossible to make a good seal, what with the sharp edge scoring and cutting holes and gaps in any thread tape or sealant I used.
Scritto da: Jabus
Not correct 3/8 size
3/8 sizing is incorrect
Scritto da: Amir G.
Great fit
Used this to connect my 1/2" gas supply line to a 3/8" quick connect adapter. Fits great and seems to be of good quality.
Scritto da: Amazon Customer
The size in the description is not correct
I went to the hardware store and got the correct fitting in five minutes. Some things are just better done in person.
Scritto da: Justine Milton
Works great!
I used this for my natural gas BBQ connection with some yellow pipe dope. I have been using it for many months and it has not developed any leaks or corroded outdoors. Very happy with the purchase!

Gerelateerde producten

hot
Blodgett 54897 Ventilator, 12Vdc
0/5

€ 222.00

Blodgett 54897 Ventilator, 12Vdc
0/5

€ 222.00

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array