0
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister

Cubitron II 3M schijfpadhouder - voor metaalslijpen, afwerken, oppervlaktevoorbereiding - gebruik met elektrisch gereedschap voor metaalbewerking - 4,5 x 1/8 x 3/8, M14-2.0 intern - 9145 4-1/2 inch x 1/8 inch x 3/8 inch M14-2.0

Brand:Cubitron

3.5/5

€
69.65

Een leuke en behaaglijke kabeltrui voor dit seizoen, verwelkom onze Katrin kabelgebreide mini-jurk met lange mouwen in je wekelijkse garderobe-rotatie. De zachte en slinkse stijl laat het winterbreisel met lange mouwen en hoge halslijn goed uitkomen.

Hoeveelheid
Voeg toe aan winkelkarKoop nu

EAN:

Categorieën Industrieel & Wetenschappelijk, Abrasive & Finishing Products, Abrasieve wielen & schijven, Sanding Disc Backing Pads,

Draadmaat: M14-2.0. Verkrijgbaar met of zonder ingebouwde schachten. Kies uit vaste of schuimoppervlakken voor aangepaste schuur- en slijpcontrole. Opties beschikbaar voor haakse slijpmachines en excenterschuurmachines. Maakt een snelle en gemakkelijke bevestiging en verwijdering van schijven mogelijk voor verwerking in meerdere stappen.
Brand Cubitron
Compatible Material Metal
Grit Material Foam
Material Foam

3.5

8 Review
5 Star
68
4 Star
15
3 Star
12
2 Star
2
1 Star
3

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: TolkienFan
3M product.... unnecessary effort required to purchase
First let me say that I found this disc pad "holder" or backing pad to be a quality item. It does the job and does it pretty well. It holds the 3M "hook and loop" discs securely and provides a decent padded surface for the abrasive disc. I purchased this backing pad for use with several different 3M discs and found it to perform very well with all of them. So, what's the problem..??? Well, here it is. The "specs" attached to this product "warn" you that this item is intended for use only by "professionals". And, you will be required to submit a "disclaimer" to the effect that you are indeed a "professional" or "commercial user" of this item. What does this accomplish.?? It only serves to make a liar out of the individual who needs one of these and who is not working in the appropriate field of endeavor. In my situation, I can realistically make the case that I am a professional user. But a lot of potential customers probably cannot do that. If I were not as appropriately placed in the field as I am, the required statement would make me uncomfortable and might keep me from purchasing. The second thing pertains to the makeup of this backing pad or "holder..". While it grabs on to the "hook and loop" discs with no problem, the backing pad itself is not as "soft" as I think it should be. It is a rubbery material but it remains quite aggressive while in use. If you need a backer with some "give", this pad may be too hard for comfortable use. In any event, I like this product. I really do. And if you are not concerned about the two issues I mentioned, then it probably is well worth five (5) stars. In my case I am giving it four (4) stars because I believe that 3M is missing the mark here with their merchandising and potentially causing undue stress.
Scritto da: Jason Evans
As far as I know it’s the only option.
It would be nice if there were other options… Be sure to order at least three or four because these things are complete crap and they don’t last very long.
Scritto da: Spartan
Works great
Works as designed. Durable piece
Scritto da: Gary G.
Essential for use
Must have. Beware lots of vibration
Scritto da: Theresa PRATT
works great
4" not 4-1/2" like i thought, my mistake , says it right in the description, however they work just fine with the 4-1/2" pads
Scritto da: KL
Love these backing pads!
These work great, just be sure you don't let your abrasive pad wear down to the point where you're damaging the stiff Velcro on this backing pad.
Scritto da: James
Works great for polishing
Works great for polishing, until the velcro wears out. Then it will launch the disk across the shop with surprising ferocity.
Scritto da: Virginia Hoffman Photography
I was very disappointed when I went to use it and it did ...
I ordered this for my 4-1/2" grinder which the seller says its intended for. I was very disappointed when I went to use it and it did not fit on any of my three grinders each made by a different manufacturer. I ended up having to recut the threading to get it to fit. No, I did not have time to return it I needed to get some work done, needless to say, ​I was not happy with 3m that day.

Gerelateerde producten

hot
Neiko 30263A - 6 inch schuurschijven klittenband, 5/16 inch as met 24 schroefdraadbevestigingen, 10.000 tpm, schuurpads voor vlakschuurmachine en DA-schuurmachine, klittenband steunschijf 6 klittenband
3.7/5

€ 29.00

Neiko 30263A - 6 inch schuurschijven klittenband, 5/16 inch as met 24 schroefdraadbevestigingen, 10.000 tpm, schuurpads voor vlakschuurmachine en DA-schuurmachine, klittenband steunschijf 6 klittenband
3.7/5

€ 29.00

hot
DEWALT DABP5SR58 STEUNSCHIJF 5 SEMI-STIJVE 5/8-11
4.1/5

€ 28.74

DEWALT DABP5SR58 STEUNSCHIJF 5 SEMI-STIJVE 5/8-11
4.1/5

€ 28.74

hot
PFERD 69478 CC-Grind steunschijf, diameter 4-1/2, schroefdraad 5/8-11, 13300 rpm
0.1/5

€ 61.24

PFERD 69478 CC-Grind steunschijf, diameter 4-1/2, schroefdraad 5/8-11, 13300 rpm
0.1/5

€ 61.24

hot
Cubitron II Scotch-Brite Roloc+ Combi-R wiel 80800, 2-1/2 inch x 1-1/4 inch P180 X-gewicht, 10 per doos
0.1/5

€ 329.70

Cubitron II Scotch-Brite Roloc+ Combi-R wiel 80800, 2-1/2 inch x 1-1/4 inch P180 X-gewicht, 10 per doos
0.1/5

€ 329.70

hot
IVY Classic 42384 7-inch turbo-steunschijf met 5/8-inch - borgmoer met 11 schroefdraad, 1/kaart 7 steunschijf
2.8/5

€ 52.33

IVY Classic 42384 7-inch turbo-steunschijf met 5/8-inch - borgmoer met 11 schroefdraad, 1/kaart 7 steunschijf
2.8/5

€ 52.33

hot
Cubitron II schijfrembloknaaf - snelwisselschroefdraad - laag profiel - te gebruiken met remblokfrontplaat - te bevestigen op haakse slijper - 2,5' x 5/8-11 schroefdraad - 28476 2-1/2 in 5/8-11 28476
2.8/5

€ 45.35

Cubitron II schijfrembloknaaf - snelwisselschroefdraad - laag profiel - te gebruiken met remblokfrontplaat - te bevestigen op haakse slijper - 2,5' x 5/8-11 schroefdraad - 28476 2-1/2 in 5/8-11 28476
2.8/5

€ 45.35

hot
3M Stikit D/F afwerkschijfpad met laag profiel 05646, 6 inch x 11/16 inch 5/16-24 extern, (pak van 10) 6
0.1/5

€ 60.60

3M Stikit D/F afwerkschijfpad met laag profiel 05646, 6 inch x 11/16 inch 5/16-24 extern, (pak van 10) 6
0.1/5

€ 60.60

hot
DEWALT DAJHXHQM01 5-inch bij 5/8-inch-11 medium Quicklock steunschijf
4.1/5

€ 61.01

DEWALT DAJHXHQM01 5-inch bij 5/8-inch-11 medium Quicklock steunschijf
4.1/5

€ 61.01

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array

Totaal:€ 0.00

Zie winkelwagenUitchecken

Categorieën

Alle categorieën
Menu Categorieën In de buurt van Winkelwagen

Menu