CURT 56020 Custom 4-pins aanhangerkabelboom aan voertuigzijde, past op geselecteerde Ford E-150, E-250, E-350 Super Duty

Brand:CURT

3.6/5

78.17

Indien uw voertuig niet voorzien is van bekabeling voor het trekken van een aanhanger, is CURT maatwerkbekabeling de ideale oplossing. Een op maat gemaakte kabelboom - ook wel een T-connector genoemd - is een eenvoudig, plug-and-play elektrisch apparaat dat wordt aangesloten op het elektrische systeem van uw auto en zorgt voor een standaard, universele aansluiting voor de bedrading van de aanhangwagen. Dit wordt gedaan met behulp van twee of meer voertuigspecifieke, OEM-compatibele connectoren die in het achterlicht worden gestoken, waardoor knippen, splitsen en solderen tijdens de installatie niet meer nodig is. Op maat gemaakte kabelbomen zijn voertuigspecifiek gemaakt en hoewel ze niet voor alle voertuigen beschikbaar zijn, bieden ze wel een van de snelste, gemakkelijkste en veiligste manieren om een ​​voertuig te bedraden om te slepen. Deze specifieke plug-in kabelboom biedt een 4-polige platte connectoraansluiting en is ontworpen als een aangepaste kabelboom voor bepaalde jaren van de Ford E150, E250 en E350 Super Duty (om de compatibiliteit van uw voertuig te controleren, zie toepassingsinformatie). Het wordt geleverd met alle benodigde bedradingscomponenten om een ​​betrouwbare aansluiting voor de bedrading van de aanhanger tot stand te brengen, evenals een stofkap om de connector schoon te houden wanneer deze niet in gebruik is. U heeft een beeld in gedachten van uw volgende bestemming -- misschien is het de aanlegsteiger van uw favoriete visplek, misschien is het een camping die uitkijkt op een van de meesterwerken van de natuur, of misschien is het de volgende grote werklocatie. Om dat beeld werkelijkheid te laten worden, is echter meer nodig dan alleen dagdromen. Er is een solide verbinding en de juiste hoeveelheid stroom voor nodig. CURT-bedrading op maat is gemaakt met de meest geavanceerde technologie in de branche en is ontworpen om gemakkelijk te installeren, waardoor u een langdurige elektrische verbinding krijgt voor uw trekhaakopstelling.

STOFKAP. Om langdurig gebruik en weersbestendigheid te bevorderen, wordt deze 4-polige kabelboom voor aanhangerverlichting geleverd met een rubberen stofkap. Hij past gemakkelijk op de 4-weg platte connector wanneer hij niet in gebruik is, en beschermt hem tegen de elementen buitenshuis. GEMAKKELIJKE GREEP. Het aansluiten van uw aanhangwagenbedrading en aanhangwagenverlichting is eenvoudig dankzij het ergonomische ontwerp van dit voertuigstopcontact. Het heeft lipjes aan de boven- en onderkant voor een betere grip bij het aansluiten op uw aanhanger of loskoppelen. VOERTUIGSPECIFIEK. Deze aftermarket-kabelboom voor voertuig-aanhangwagen is ontworpen voor geselecteerde jaren van de Ford E 150, E 250 en E 350 Super Duty. STANDAARD CONNECTOR. Deze plug-in 4-voudige aanhangerbedrading kan worden gebruikt voor het aansluiten van aanhangerachterlichten, remlichten en richtingaanwijzers. 4-weg bedrading voor aanhangwagenverlichting is populair op een verscheidenheid aan aanhangwagens, waardoor veelzijdige trekmogelijkheden voor uw voertuig worden toegevoegd. MAKKELIJK TE INSTALLEREN. Niet snijden! Geen splitsen! Deze kabelboomset voor een aanhangwagen kan worden aangesloten op de bestaande fabrieksbedrading van uw voertuig en is uitgerust met een standaard 4-pins aanhangwagenbedradingsconnector aan de achterkant voor het aansluiten en trekken van een aanhangwagen.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 190 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎56020
Item Weight 0.71 Pounds
Item Weight ‎11.4 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56020
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56020
Product Dimensions ‎9 x 4 x 3 inches

3.6

11 Review
5 Star
80
4 Star
8
3 Star
5
2 Star
2
1 Star
5

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Kel
Worked great!
This worked great for my 2008 e350 ford. The instructions didn't work for my passenger model though. I had to follow a video from etrailer, this harness is almost the same as theirs but it doesn't have the long wire for ground (so it's much easier to install).
Scritto da: JDeMattos
Hyperflash on left signal ONLY.
Plug and play harness. Instructions are pretty vague but it’s not rocket science. They essentially “piggyback” off of the stock tail light bulbs. They should label right and left. Thankfully I tested before reinstalling everything and figured out I had it backwards. Right signal works as it should on my van and my trailer but left signal is blinking twice as fast or what’s known as “hyperflash”. All lights are operable so it sure why only one side is flashing faster than the other. Docked a star for that. Other than that, works as it should.
Scritto da: KL
Works but seems poorly planned
We installed this in a 2014 E350. It works well enough and it IS worth it simply for the factory style plugs at each tail lamp. However, the right (green/white) side was too short (at least for how I chose to install it) and the left (yellow/brown) was inexplicably long - VERY long. I actually wound up splicing in about 2' of green and white wire, so you might consider having some green and white primary wire on hand along with some butt connectors. Note the included instructions talk about slitting a grommet but I could not locate said grommet and it was not mentioned in the YT video, either. I was simply able to run through a hole where the taillight wires entered and down behind the plastic trim of the last pillar, then under the kick plate. The hole did not feel like it had any sharp edges and actually felt nicely finished. Now, from the kick plate I took advantage of 2 oval slits next to the door striker. I believe other reviewers have alluded to this as well. I put all 4 wires of this harness in plastic loom to protect them as they pass down through the body. Our vehicle had a tapped hole in this area as well that had a plastic thumb screw of sorts. I used a 3/8" insulated rubber clip around my plastic loom and replaced the thumb screw with a standard M6x1.0 bolt, see pic. You will have to trim some rubber "grips" off the plug to get it thru the oval holes. These are just there for human finger comfort and serve no important purpose. From here I ran the plug under my hitch and again secured the wiring with an insulated rubber clip.
Scritto da: Carlos Carlo
Easy to install and have trailer lights
Not too much to say about this other than it went in easy hooked up easy and works fantastic. One thing I think could be better is a little more detailed instruction and maybe color-coded step by step instruction be nice but not really necessary it's definitely worth purchasing this kit and installing it in your van so you have trailer lights it's pretty cool
Scritto da: James M. Droddy
Perfect fit
Fit perfectly. Just takes some time to install on the van since you have to run the wiring to both lights. However, works perfectly.
Scritto da: Notso
1 tool required
I just needed a hex bit to remove my tail lights then these were plug-n-play. Fantastic kit. Saved me the time of splicing wires etc...
Scritto da: T in florida
Easy to install vehicle trailer harness
The harness was incredible simple to install on a 2013 Ford E-350 full size van
Scritto da: Roger Ferrer
Muy bueno
Muy bueno
Scritto da: mike
Great product
Very simple plug and play ! Highly recommend
Scritto da: GERARD ARSENAULT
nice set up
foul proof 15munute job
Scritto da: Amazon Customer
Easy install and works.
Straightforward to install and worked as expected.

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array