CURT 56190 Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter, 4-pins kabelboom, zwart

Brand:‎CURT

3.2/5

87.85

Converteert 3-draads voertuig elektrisch systeem naar standaard 2-draads aanhangerbedrading 4-weg platte uitgang voor aansluiting van achterlichten, remlichten en richtingaanwijzers Gemaakt met SMT-circuits voor betere prestaties en duurzaamheid Kleurgecodeerde draden voor eenvoudigere installatie Inclusief kliksluitingen voor snelle, veilige verbinding Geen heavy-duty knipperlicht nodig Stofkap meegeleverd om de connector schoon te houden wanneer deze niet in gebruik is Opmerkingen: Vereist CURT-bedradingsset #55151 of vergelijkbaar Wanneer uw voertuig niet gemakkelijk een elektrische aansluiting biedt voor het aansluiten van uw aanhangwagen, converteert CURT elektrisch de oplossing bieden. Werkende achterlichten op uw aanhanger zijn absoluut essentieel wanneer u sleept, en een omvormer biedt een effectieve manier om uw voertuig goed uit te rusten voor veilig slepen. Een CURT-elektrische omvormer vormt, net als onze op maat gemaakte voertuig-naar-aanhangwagen-kabelbomen, een aanhangwagenconnector op uw voertuig door deze in het elektrische systeem van het voertuig te splitsen. Elektrische omvormers zijn ontworpen om rechtstreeks in de bedrading van het achterlicht te worden gesplitst, in plaats van in verschillende stopcontacten te worden gestoken, waardoor ze de bijnaam achterlichtomvormers krijgen. Hoewel het wat meer werk vereist in vergelijking met een op maat gemaakte kabelboom, biedt een achterlichtconverter een betrouwbare connectoroplossing voor de lange termijn. Deze CURT elektrische omvormer is ontworpen om een ​​3-draads systeem om te zetten in een 2-draads systeem en biedt een standaard 4-polige platte stekkerdoos om uw aanhangwagen aan te sluiten. Het is ontworpen om te passen op bepaalde jaren van de Audi Q5 (behalve hybride), BMW 328i xDrive sedan, BMW X5 SUV, Infiniti M37x sedan of Mercedes SLK250 (zie de CURT-toepassingsgids op curtmfg.com om de compatibiliteit van uw voertuig te controleren). Deze converter is gemaakt met geavanceerde SMT-circuits (surface-mount technology), met elektrische componenten die rechtstreeks op het oppervlak van het bord worden gemonteerd in plaats van in een reeks gaten te worden gestoken. SMT-circuits hebben een langere levenscyclus, lagere weerstand, minder warmteontwikkeling en zijn betrouwbaarder dan doorlopende componenten. PRODUCTSPECIFICATIES HUB_USA D25 Garantie Eén jaar beperkte garantie Moeilijkheidsgraad installatie Moeilijk Type onderdeel 3-naar-2-draads Achterlichtconverter Materiaal blanco Verzendgewicht 0,570 Installatietijd Exact 60 Draai- en remcircuits 7,5 ampère per circuit Achterlichtcircuits 7,5 ampère per circuit Uitgangstype 4 -way flat Circuit-Protected Ja Battery-Powered Ja

WEERSBESTENDIG. Om deze aanhangwagenverlichting te helpen beschermen tegen de elementen, wordt hij geleverd met een rubberen stofkap voor de 4-pins bedradingsconnector, die hem beschermt tegen regen, vuil, stof en meer wanneer hij niet in gebruik is. KLAAR OM TE INSTALLEREN. Deze aanhangwagenverlichtingsconverter wordt klaar voor installatie op uw voertuig geleverd. Het bevat kliksluitingen voor een veilige verbinding van de draden en er zijn geen zware flitsers nodig (CURT-converterbedradingsset #55151 vereist, wordt apart verkocht). KLEURGECODEERDE DRADEN. Om de installatie sneller en eenvoudiger te maken, wordt deze kabelomvormer voor aanhangers in uw voertuig gesplitst met behulp van kleurgecodeerde draden (7,5 ampère signaalcircuit, 7,5 ampère achterlichtcircuit). STANDAARD UITGANG. Deze achterlichtconverter converteert het 3-draads elektrische systeem van het voertuig naar standaard 2-draads aanhangerbedrading en biedt een standaard 4-polige platte stekkerdoos voor het aansluiten van de achterlichten, remlichten en richtingaanwijzers voor het slepen. BETROUWBARE KRACHT. Deze aangedreven 3-naar-2-draads achterlichtconverter biedt een betrouwbare optie voor een gesplitste trailerkabelboom, als een CURT aangepaste trailerkabelboom niet beschikbaar is voor uw voertuig.
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 73 ratings 4.2 out of 5 stars
Item model number ‎56190
Item Weight ‎9.1 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56190
Model ‎Taillight Converter
OEM Part Number ‎56190
Product Dimensions ‎9 x 4 x 3 inches

3.2

13 Review
5 Star
56
4 Star
24
3 Star
7
2 Star
7
1 Star
6

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Daniel Demetre
Convert semi truck to RV connector
I bought this converter because I needed to pull my gooseneck trailer(7 pin RV style flat pin plug) with a semi tractor(standard 7 pin round semi plug). A semi tractor uses a separate circuit to operate the brake lights and the turn signals unlike trailers like RVs that are wired to be pulled by an automobile that combine them onto one circuit. Without this converter the brake lights and turn signals would do all kinds of crazy things. This takes the two isolated circuits and combines them for the trailer without affecting the semi tractor lights. I built an adapter harness to go between the semi tractor plug and the trailer plug with the Curt 56190 3 to 2 wire converter in the adapter harness. It worked very well. (obviously there is more to my adapter than just light conversion, but this is what I used for that portion) Note that this is a powered converter! There are non-powered converters available as well. I used this powered converter because of the number of lights on my trailer. It probably wasn't necessary but I wanted to be sure I had enough power to operate them all brightly. So this adapter requires a functional 12v input to power it. Without the power input(always powered when in use) it will not function at all (no lights at all). If you are wanting to pull your RV or trailer with a semi tractor, and need to adapt the lights this will work nicely for your adapter.
Scritto da: Rhick
No instructions For a 2 wire vehicle where the break & turn signals share the same wire.
Cons instructions suck for a 2 wire vehicle where the turn signal & break light signal are on the same wire. Solution= Simply don't use the break light/stop light wire on this kit, just cap it off with a electrical crimp connector & hook up the left and right turn signal wires to each side of vehicle and the park light wire. Pros once you understand the wiring it works great.
Scritto da: Jonas W.
Self explanatory
All the wires are labeled on the device itself. It’s self explanatory. If you can’t figure it out from the picture before you buy it, don’t. The instructions suck balls
Scritto da: W245
Works well but check parts
Worked well but didncome with wire taps. Also, instructions are lacking, but there are good videos online.
Scritto da: TK
Good product, wrong wire connectors for my car.
The unit itself works fine. The connectors are not good on newer cars with rear led lights because the wire is so thin the connectors don't make good contact. I used some old phone wire beans I had laying around, which have a gel in them to protect the connection. Overall I would buy it again. You will also need to buy a roll of wire (18 ga) and an 'add a fuse' to complete the job.
Scritto da: Nash O
Works perfect on e320 2005 CDI Mercedes but...
worked great but was missing the wire splicers and the fuse holder. Had to run to Lowes twice. After that it was perfect. You must watch the online video to figure out what wire go where. With extreme caution took 2 hrs to install plus lowes trips were extra.
Scritto da: joe c.
High Capacity, powered, circuit protected taillight converter
I wish Amazon/Curt would do a better job of describing these things. A chart would be nice. A photo of the front of the packaging (with the useful information) wouldn't hurt either. The heavy duty part means 7.5A each Left / Right Signal circuit. And 7.5A for the separate tails. I don't know how that is supposed to work out using a 10A max fuse. It is "powered" so hopefully won't draw much off of the existing vehicle lighting circuits. Is circuit protected (not mentioned in the description)
Scritto da: matthew benz
Great box but blade fuse connection was faulty????
The flipping fuse connector was faulty straight from the box (hence the 4 star)but everything else worked great. I recommend using the posi-tap connectors instead of the t-tabs. The posi-tap connectors are Way easier to use and an extremely great and secure connection.
Scritto da: Amazon Customer
Some of the best customer service.
Something was wrong. And they replaced it in a minute. Amazing customer service. Can't go wrong with this item
Scritto da: Harnake Bangar
Works well!
Easy to mount, universal wiring. Did the job perfectly.
Scritto da: bill lemay
Does not come with
No battery wire and fuse link included
Scritto da: Carl Cauchon
Très bon produit
Très bonne qualité facile à installer
Scritto da: curtis collins
Five Stars
works great

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array