Danco 10062 universele bumper, voor gebruik met toiletbrillen, rubber, 1 pak, wit

Name: Danco 10062 universele bumper, voor gebruik met toiletbrillen, rubber, 1 pak, wit
Brand: Danco
SKU: 082901273509
Price: 21.98 EUR
Availability: InStock

Brand:Danco

2.8/5

€
21.98

PRODUCTBESCHRIJVING Deze opplakbare bumpers voor toiletbrillen bieden een eenvoudig alternatief voor het vervangen van een hele toiletbril. Inbegrepen zijn (2) ronde toiletbrilbumpers en (2) langwerpige toiletbrilbumpers. Ze hebben een stevige rubberen constructie die sterkte en duurzaamheid biedt en uw toiletbril beschermt en beschermt. Deze bumpervervangingskussens kunnen de inklik-, inschroef- en tack-bumpers van het deksel van de toiletbril vervangen. Deze universele toiletbrilbumpers werken met de meeste merken en modellen toiletbrillen, maar werken het beste met een toiletbril met een glad oppervlak. Deze vervangende bumpers zijn perfect voor de reparatie van uw toiletbril. Bestel de jouwe vandaag nog! VAN DE FABRIKANT Danco is een van de grootste leveranciers van reparaties, vervangingen en verbouwingen van loodgieterswerk in de woningverbeteringsindustrie. We zijn grotendeels gericht op het versterken van doe-het-zelf-consumenten met betaalbare sanitairproducten en -oplossingen die nieuwe en verfrissende decors voor badkamers en keukens creëren.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 082901273509

Categorieën Tools & Home Improvement, Keuken- & Badinrichtingen, Bathroom Fixtures, Toiletten & Toiletonderdelen, Toiletstoelen,

Makkelijk te installeren. Inclusief 2 stoelbumpers. Hecht aan de toiletbril met op maat gemaakte zelfklevende pads. Past op elk merk en model toiletbril. Gebruikt voor reparatie van toiletbrillen. GEMAKKELIJK TE GEBRUIKEN: Maak de ringen van de toiletbril grondig schoon en houd deze schoon en droog, verwijder de zelfklevende achterkant van de bumper van de toiletbril en plak deze op de ringen van de toiletbril, druk hard om ervoor te zorgen dat hij stevig kan plakken (niet gebruiken gedurende 10 minuten na installatie). UNIVERSEEL ONTWERP: Universeel ontwerp dat past op de meeste merken en modellen toiletbrillen (werkt het beste met een toiletbril met een glad oppervlak). INCLUSIEF: (2) ronde toiletbrilbumpers (2-1/4 inch lang en 3/4 inch breed met een dikte/hoogte van 1/2 inch) en (2) langwerpige bumpers toiletbrilbumpers (3/4 inch buitendiameter met een dikte/hoogte van 1/2 inch). EXTRA DEMPING: Vervangt snap-in, screw-in en tack-on type toiletbrilbumpers en de stick-on rubberen constructie met witte afwerking past bij de meeste bestaande toilet- en badkamerarmaturen. CUSTOM-FIT ADHESIVE PADS: Hecht aan de toiletbril met duurzame, op maat gemaakte zelfklevende pads die helpen bij het beschermen en beschermen van uw toiletbril.

Assembled Diameter	‎1 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Danco
Color	White
Color	‎White
Country of Origin	‎China
Customer Reviews	3.8 3.8 out of 5 stars 4,773 ratings 3.8 out of 5 stars
Cutting Diameter	‎1 Inches
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Rough Plumbing;Parts and Repair;toilet-repair-kits
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2.97 x 0.59 inches
Item model number	‎10062
Item Package Quantity	‎1
Item Weight	0.08 Pounds
Item Weight	‎1.28 ounces
Manufacturer	‎Danco, Inc.
Material	Rubber
Material	‎Rubber
Measurement System	‎Inch
Part Number	‎10062
Shape	‎Round
Size	‎1 Pack
Style	‎Modern
Warranty Description	‎Limited 1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Linda J

Does the job!

They are working well on my very old (and blue Koehler) toilet seat. I opted to use a different adhesive instead of what came in the package, and they are holding up well. My suggestion to the manufacturer would be to include a small tube of E6000 adhesive, which does a great job.

Scritto da: Janet Prendergast

Don't last long

I had an old (about 30 yrs) wooden toilet seat and the original bumpers were cracking and falling off. The seat was in good shape and it's hard to find the good wooden ones anymore. So I saw these and figure this was the solution. Within a week they started falling off. One landed up getting flushed. I even tried to Gorilla Glue them on but that too failed. Maybe they will work better on the plastic seats but it didn't' hold on the wooden seat. I landed up replacing the seat with a plastic one.

Scritto da: Caroline Moniz

Works well

Way better then plastic bumpers that crack. These are of very good quality.

Scritto da: Tom

Just what I needed

My hard plastic toilet seat bumpers had cracked and come apart. These were just what I needed. After a couple of months they are holding up well. Very happy with them.

Scritto da: Vince Prybeck

Easy to install and work well, if they stay glued.

Easy to install, but they may fall off after a few months requiring glue to re-install afterwards. I've already done 2 of the 4 I got, but they stay after they are re-glued so far.

Scritto da: Kathleen

Not white

Says white....not, it is an off white.

Scritto da: adumas18

Doesn't stick

The tape it comes with does not stick at all to the toilet lid or even the product itself. I had to use wall hanging double sided tape I had to get these to stick. The actual product is sturdy but the tape is useless.

Scritto da: Just Joe

Did not use. Too small to match previous bumpers.

Not used.

Scritto da: Luc Labelle

They work great but, could have better adhesion from 3M.

They work great but, they could have better adhesion from the 3M double sided tape that comes with it . I had a hard time making it stick and finally they did when I installed them under the seat and sat down on it to apply pressure on them and they finally glued on correctly and are still holding great . I would have preferred screwed on than these but, the rubbers are of really good quality , it's just the double sided tape for me that's not quite the right one for the job , I think . I'm used to double sided tape for car moldings and it sticks a lot more than these ones but like I said , they did the job . Thank you .

Scritto da: Patrick

Only diamonds are forever, not these toilet seat bumpers.

Got these bumpers so that it would fill the gap between my toilet seat and rim caused by bidet installation. They really did not last long at all. They stick on for a bit then you find later they have fallen in the toilet. They don' t stay where they are supposed to. Perhaps its because I did not use crazy glue on them like some other people have suggested. Or even use crazy clue then hold in place with binder clips over night. This could help. At first I had them on the underside of the toilet seat itself. This seemed to work for a while then they would fall off. Eventually I tried sticking them to the toilet so that my weight would constantly keep them sticky and in place. I'm not sure how but they still somehow end up falling out into your toilet at some point. I would definitely agree that the stickiness that comes with these is not a long lasting method. The other side of the coin is that they are in kind of a dirty area. Eventually they are going to get dirty and you are going to want to replace them anyway. Just a thought.

Scritto da: Amazon Customer

Don't stick

These bumpers would be great but the glue pads just do not stick. The first one fell off in less than a week and after three weeks they are all gone. This was after carefully cleaning both surfaces. Won't buy these again as I literally flushed my money down the toilet.

Scritto da: Dale

Satisfied

I was unable to locate the exact size I needed (3/8”) for my toilet seat bumpers anywhere, so had to shave these half inch ones down to work correctly. They work perfectly now.