Danco HYR270 Hydroright waterbesparende dubbele spoelklep met drukknophendel, chromen drukknop

Name: Danco HYR270 Hydroright waterbesparende dubbele spoelklep met drukknophendel, chromen drukknop
Brand: Danco
SKU: 188670000459
Price: 69.93 EUR
Availability: InStock

Brand:Danco

3.2/5

€
69.93

PRODUCTBESCHRIJVING De HydroRight Dual Flush Valve verandert snel en eenvoudig een standaard toilet in een tweeknops toilet met dubbele spoeling en bespaart een gezin van vier personen meer dan 15.000 liter water per jaar door de keuze te bieden tussen een volledige of beperkte spoeling. Eén knop is de Quick Flush-instelling die de watervolumes voor vloeistoffen en papier aanzienlijk verlaagt - de instelling was 4 van de 5 keer nodig. De tweede Full Flush-knop gebruikt de normale hoeveelheid water voor vaste stoffen. Ontworpen voor drop-in installatie, is de HydroRight de enige omvormer die kan worden geïnstalleerd zonder gereedschap en zonder de tank te hoeven verwijderen. De HYR270 vervangt de klep, ketting en handgreep en elimineert daarmee de meest voorkomende toiletproblemen. De HydroRight vervangende toiletspoelklep verandert de meeste standaard toiletten eenvoudig in een waterbesparend toilet met dubbele spoeling dat tot 70% minder water gebruikt voor vloeistoffen en papier. Elimineert de meest voorkomende problemen in toiletten die lekken veroorzaken, aangezien deze spoelklep een versleten -out toilet flapper, ketting en handvat die vaak kunnen breken. Past op 1,6 tot 3,5+ GPF (gallons per spoeling) standaard 2-delige toiletten met 2 inch spoelklep en vereist een minimale speling van 10 inch vanaf het hoogste punt van de spoelklepopening aan de binnenkant van het tankdeksel.Opmerking: Past NIET op Mansfield-toiletten en is niet compatibel.Eenvoudige drop-in-installatie zonder gereedschap in minder dan 20 minuten en GEEN TANK VERWIJDEREN vereist.Gemaakt van duurzaam plastic en de Perma fit siliconenafdichting is chemisch AMAZON.COM MJSI's HYR270 HydroRight drop-in dual-flush-converter kan een gezin van vier meer dan 15.000 liter water per jaar besparen door gebruikers de keuze te bieden tussen een volledige of beperkte spoeling. Ontworpen en gepatenteerd om eenvoudig in uw toilettank te laten vallen en aan de bestaande spoelklep te bevestigen, de installatie van de HydroRight vereist geen verwijdering van de tank of gereedschap en kan in minder dan 10 minuten worden voltooid. De HydroRight werkt met alle standaard spoelkleppen van 2 en 2,5 inch en biedt consumenten een goedkope, probleemloze manier om water te besparen.HYR270 HydroRightDrop-In Dual-FlushConverter in één oogopslag: * Gebruikt tot 70 procent minder water voor vloeistoffen en papier * Zonder gereedschap te installeren in 5 tot 10 minuten - tank hoeft niet te worden verwijderd * Werkt met alle standaard spoelkleppen * Vereist minimaal 10-inch vrije ruimte vanaf het hoogste punt van de spoelklepopening tot aan de binnenkant van de tank lidMJSI's HydroRight dual-flush-converter transformeert uw standaardtoilet eenvoudig en goedkoop in een water- en geldbesparend apparaat (groter weergeven). gebruik van kleinere watervolumes voor vloeistoffen en papier. Een tweede instelling voor volledig spoelen gebruikt de standaard hoeveelheid water voor vaste stoffen. Industrie-experts zijn het erover eens dat vier van de vijf spoelbeurten alleen de hoeveelheid water vereisen die wordt gebruikt in de snelspoelstand - wat betekent dat 80 procent van de spoelingen geld en water verspilt aan alle toiletten die geen dubbele spoeling hebben. Uit een onafhankelijk onderzoek bleek dat de HydroRight een gemiddelde waterbesparing van 30 procent liet zien, met in sommige gevallen zelfs 50 procent. HydroRight helpt niet alleen natuurlijke hulpbronnen te behouden, het blijkt ook zuiniger te zijn dan de aanschaf van een geheel nieuw toilet met dubbele spoeling, dat tot honderden dollars kan kosten. , heeft een recentere innovatie op het gebied van sanitair dual-flush-converters geproduceerd die bestaande toiletten ombouwen tot dual-flush-systemen. De HydroRight-converter bevat een handgreep met twee knoppen waarmee gebruikers de hoeveelheid water kunnen selecteren die tijdens het spoelen wordt gebruikt: de snelle spoeling voor vloeistoffen en papier en de volledige spoeling voor vaste stoffen. Het aanpassen van de waterstroom voor beide spoelingen is dankzij de HydroRight snel en eenvoudig in de tank te doen. Bovendien, omdat de koepelpakking van de HydroRight in het afvoergat zit in plaats van in een flapper, worden problemen die verband houden met flappers, zoals lekken en gebroken of verwarde kettingen, geëlimineerd. De USEPA schat dat 20 procent van alle toiletten tot 200 liter water per dag lekt (het equivalent van 73.000 liter per jaar), voornamelijk vanwege defecte flappers. Niet met de HydroRight: om te installeren, verwijdert u de oude flap en hendel, schuift u de dubbele spoeling langs de overloopbuis in uw tank en draait u deze vast, en vervangt u de hendel door de knop en stelt u de hoeveelheid snelspoeling in. U hoeft niet meer aan de hendel te schudden om goed door te spoelen. Toonaangevende innovatieMJSI, Inc., met hoofdkantoor in Shorewood, Illinois, is de fabrikant van een portfolio van producten die gericht zijn op waterbesparing en milieuvriendelijk sanitair. Erkend als experts op het gebied van toiletefficiëntie, heeft de innovatie van MJSI de loodgietersmarkt uitgebreid van reparaties tot verbeteringen in efficiënte toiletconstructie. De HydroRight is niet alleen de ontvanger van de Chicago Innovation Award, maar heeft ook talloze onderscheidingen gekregen van Popular Mechanics, Handy magazine en Hardware Retailing magazine. spoelhandgreep met knoppen, één nokversteller, twee ritssluitingen en installatie-instructies. De HydroRight is eenvoudig te installeren in de tank van uw toilet en kan worden aangesloten op een handgreep met twee knoppen, waardoor snelle en volledige spoelmogelijkheden mogelijk zijn (klik op elk om te vergroten ). VAN DE FABRIKANT Danco is een van de grootste leveranciers van loodgietersreparaties, -vervangingen en -renovaties in de woningverbeteringsindustrie, die zich grotendeels richt op het versterken van 'doe-het-zelf'-consumenten met loodgieterswerkoplossingen die even praktisch als betaalbaar zijn, waardoor uw huis een meer frisse aantrekkingskracht en hernieuwde elegantie. Wij bieden stijlvolle, design-georiënteerde, innovatieve huisoplossingen die gebruiksvriendelijk zijn om klanten te ondersteunen en aan te moedigen om zelf klusjes te klaren - zonder het hoge prijskaartje van professionele diensten. Bekijk meer

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 188670000459

Categorieën Tools & Home Improvement, Industrieel & Wetenschappelijk, Rough Plumbing, Toiletonderdelen, Toilet Flappers,

GEBOUWD OM LANG TE GAAN: Gemaakt van duurzaam plastic en de Perma fit siliconen afdichting is bestand tegen chemicaliën en zal niet kromtrekken. DUURZAME CONSTRUCTIE - Bestand tegen chloorchemicaliën en zal niet kromtrekken. GEMAKKELIJKE INSTALLATIE ZONDER GEREEDSCHAP: Eenvoudige drop-in installatie zonder gereedschap in minder dan 20 minuten zonder dat de tank moet worden verwijderd. COMPATIBILITEIT: Past op 1,6 tot 3,5+ GPF (gallons per spoeling) standaard 2-delige toiletten met 2 inch spoelklep en vereist een minimale speling van 10 inch vanaf het hoogste punt van de spoelklepopening tot aan de binnenkant van het tankdeksel; Opmerking: PAST NIET op Mansfield-toiletten en is niet compatibel. REPARATIES GEMEENSCHAPPELIJKE LEKKAGE TOILETPROBLEMEN: Elimineert de meest voorkomende problemen in toiletten die lekken veroorzaken, aangezien deze spoelklep een versleten toiletklep, ketting en handgreep vervangt die vaak kunnen breken. WATERBESPARENDE TOILETSPOELKLEP: De HydroRight vervangende toiletspoelklep verandert de meeste standaard toiletten eenvoudig in een waterbesparend toilet met dubbele spoeling dat tot 70% minder water verbruikt voor vloeistoffen en papier.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Danco
Color	‎Chrome
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 2,097 ratings 4.2 out of 5 stars
Exterior Finish	Chrome
Included Components	‎Building Materials & Ladders;Other Material Handling;hydraulic-valves
Inlet Connection Type	Barb
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	4 x 3 x 10.5 inches
Item model number	‎HYR270
Item Package Quantity	‎1
Item Weight	‎14.4 ounces
Manufacturer	‎Next by Danco
Material	Plastic
Material	‎Plastic
Number of Handles	‎1
Part Number	‎HYR270
Product Dimensions	‎4 x 3 x 10.5 inches
Size	‎1 Pack
Style	‎Push Button
Warranty Description	‎1 year warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Ezzard Nash

Awesome & Efficient!

I just installed this product and it’s working great. The install on this product was pretty simple and took me about 30min, mainly due to the old lever handle being problematic/stripping when trying to take it off + me being overly cautious so as to not damage anything during the install. It’s working seamlessly now and it’s pretty awesome/shocking to see how much less later is needed and used on the quick-flush (liquids) setting – The “up to 70% less water” claim is definitely accurate. Below are some additional observations/recommendations: 1. NOTE that this specific product does NOT include a fill valve (not an issue for me, as I replaced the fill valve a year ago and the product works great with it). 2. I’d recommend YouTube for install instructions, as what I found and used was on point and easily understood even though it included the Danco Fill Valve and instructions therein. 3. The flush converter base was the only thing that threw me off during the install, as it was difficult to have a point of reference for a “snug fit”. I took it off and put it back on a few times before realizing that it was on correctly ( wasn’t sure how much the blue rubber piece should depress into the tank hole, but after some checking, I realized that it had dropped in fine). 4. I tested including 4-sheets of toilet paper with the quick flush, for obvious reasons, and they went down fine.

Scritto da: Mad Max

Great idea - with two BIG problems for common toilets. A response (with fixes) to the complaints...

UPDATE (Dec 2011): At Home Depot today I saw an end cap with an infomercial running about this gizmo. However, I took one out of the box, and I was so disappointed to see the same darn paper-thin gasket that I (and many others) have reported to them over the past 2 years. Additionally, the Home Depot staff said they get a lot of returns on this item. This company knows that their gasket is too thin, causes leaks, and that including a higher grade gasket would cost them very little (approx 20¢ per unit). Somehow they can find the budget to launch a Home Depot marketing campaign & produce a new infomercial, but can't spend an extra 20¢ per product to prevent the headaches they're causing. I'll add that my fixes work, but the silicone seal is NOT a permanent solution (already had to replace it once). If this gizmo is not ready to use out-of-the-box, and requires annual or semi-annual maintenance, it is NOT ready for the market. If you want a dual flush, you can get a brand new dual-flush toilet for under $100. Original Review: ====== Ok, I also had two problems when installing this, and I have fixes for the 30+ people who have complained about similar install problems (same root problem in almost every instance). I predict that for MOST people, this dual flush device will not be an "out-of-the box" solution - you will need some troubleshooting not included in the instructions. But I also predict that because of bad installs, some folks here (not realizing it yet) will have running toilets, or will actually use MORE water on the low-flush feature than they did before! Unless you measure it like I did, you'll never know. This is a SERIOUS problem this company needs to address, costing lots of money and wasted water - and homeowners may never even know it! I feel ~really~ bad for the folks who spent hours & hours wrestling with this device, but I promise these 5-minute fixes will work. I wholeheartedly agree that there are design flaws here, but finding a workaround saved me the hassle of returning it & messing around with another brand (and probably an entirely new set of problems). I'm going to stress - you CAN get this to work with your older toilet, and you do NOT need the HydroClean (or any other) device to make this work. I like the HydroClean unit, but IT IS NOT NECESSARY to install your dual flush converter. FIRST: THE LOW-FLUSH FEATURE ISN'T WORKING FOR YOU Again, I totally agree - the instructions aren't clear. I had to try 20-30 flushes before my "Ah-ha" moment. If your low-flush doesn't work, 99% chance the problem is water level is too low. It's not getting enough water to flush. Do NOT hold down the flush button to get this to work - if you have to do that, it that means you're using more water than before! And do NOT flush twice To "fix" the problem - just read on... Solution (bottom line): You need to set the float level for the low-flush (the blue tab) 1/2" BELOW where you want the water line (yes, below). Then, the water line has to be about 2" ABOVE the float, so it can use roughly 2" of water on a low flush. I know it sounds odd, but try a flush - if it doesn't work, keep adjusting the low-flush water level up a notch. I PROMISE - this will work. I know it sounds backwards - but to save water you will need to keep MORE water in your tank. The water is not actually used each flush - it just needs 1.5" to 2", which should translate to .6 gallons or less. (My low-flush setting uses .4 gallons, which is efficient and also 33% less water than national standards for even a urinal). If you have a HydroClean installed, it may actually be getting in your way. So set the float/fill level to the near maximum setting. With my HydroClean, my previous setting was about 1.1 gallons with my toilet (I thought I was saving water this way). But with the dual converter installed, I had to add nearly 50% more water to the tank - so that the low-flush feature can work right. Now my main flush uses 1.2 gals (about 25% less water than national standards), and my low-flush works great too. SECOND: YOUR TOILET IS RUNNING Some people may not even realize that their new dual flush converter is running. A running toilet will definitely waste more water than it saves - possibly wasting hundreds or thousands of gallons a month!!! The problem is the blue "silicone" flapper gasket is CHEAP thin rubber. If it's not perfectly straight, the rubber will fold or ripple & allow water to seep into the tank. Frankly, I would suspect 75% of all users will immediately or eventually experience this. It's a bad design, almost a defect (it needs to be larger & sturdier). I had to refit this 3 or 4 times, but the problem is, once the entire dual-flush contraption is fully installed, you can't see the blue gasket to confirm it makes a good seal. You MUST listen to the toilet a few hours after install, to see if it runs (or add a blue cleaning disc or some food coloring to your tank, then check the color of the bowl later). This can waste 10-100 gallons per DAY (yes, up to 100 gallons) - so if your goal in using the dual flush is to save water, think twice. Solution (bottom line): You will most likely need to seal it with a waterproof silicone sealant or high-grade waterproof caulk. A third potential problem is replacing your flush handle with the new dual-flush "button". If your handle is off to the side of your toilet tank, if you have a triangle-shaped toilet, or if your toilet is right against the wall, then you (or your guests) won't be able to see which button to push. I give this 5 stars for ingenuity, but 1 star for major design flaws.

Scritto da: Roc1

Works great; but some toilets might need their Fill Valve also. Read my tips.

This thing works great. Always wanting to save water, this is the perfect solution for the toilets. I didn't want to get the type with a split handle you press down but rather the dual pushbutton style that this one has. Initially I bought only one for the first floor half bath to check it out because some people seem to have had a problem with it working properly. It worked out superbly so I went and bought two more for the upstairs bathrooms. As it turns out, for some strange reason, for the third toilet, I couldn't get it to flush well enough for the #1 button. But I determined it to be the toilet's problem and not a reflection of the quality or design of this dual flush converter. If you have problems, you might want to read the following: First, the toilet jets needed to be cleaned out. I did this by cleanly cutting an 8-inch piece of stranded cable (like what is used with a garage door opener) and chucking it up with a variable speed drill. (First flush the toilet with the water cut off at the toilet to lower the water level in the bowl.) Then WITH THE DRILL SET IN THE REVERSE DIRECTION in order not to unravel the twisted cable, I slowly started rotating the cable while inserting the free end of the cable into the toilet jets, one at a time, to ream them out. This helped a lot but still needed more improvement. Second, I temporarily unlatched and set aside the upper housing of the dual flush converter (without uninstalling anything) and inserted a plastic pipe directly into the drain hole in the bottom of the tank. (If you still have the old style flapper type installed, merely lift up on the flapper to insert the pipe.) Then, using a funnel in the top of this pipe, I poured in about half a gallon of acidic toilet bowl cleaner (bought at Home Depot). It drains through the jets and the lower flush port and into the bowl. I removed the pipe and let it sit overnight. It loosens the rust from the jets and all the mineral buildup in the toilet bowl trap. Next morning I reconnected the dual flush converter housing, turned on the water, let it fill, and did a full flush. Third, I noticed that when flushing with the #1 button on this particular toilet, the bowl didn't fill as high as when flushing with the #2 button. This was a function of the old fill valve so I bought the HydroClean HC660 fill valve made by the same company (MJSI, inc.). This fill valve has a really nice feature that lets you adjust with a mini-valve the amount of water that fills the bowl (via the overflow tube). The simple detailed instructions come with the fill valve. I made this adjustment so that the bowl fills just to the point where the toilet trap is full when the tank fills and any more would be a waste. Now everything works perfectly. Addendum: After several days of monitoring, it became evident that the second toilet was "ghost flushing", i.e., the tank would very slowly drain past the seal at the base of the dual flush valve. What I didn't mention above was that this same toilet was doing this before; that is, the old flapper didn't seal well either and once the water level in the tank drops a couple inches, the fill valve turns on to bring the water level back up. So I replaced the old base unit, i.e., flush valve kit which is the part that the old flapper was attached to; this is the part that includes the overflow tube and attaches with big rubber gaskets to the base hole in the bottom of the tank. Of course, I didn't use the new flapper that comes with this kit. Instead I reinstalled the dual flush valve. Now it doesn't leak at all. This is important to understand for those who have had difficulty with the dual flush converter seal not sealing against the old surface that the old flapper sealed against. Good chance that the old flush valve base is at fault. You can't expect the blue silicone dome gasket at the base of the dual flush converter to necessarily seal against a faulty old unit that the old flapper sealed against.

Scritto da: Guy McLean

Easy installation & it just works.

Easy installation, clear instructions, and it just works. What else can you ask for.

Scritto da: odobit

Installation is easy but I prefer push button to lever.

I have installed 2 of these. Master bedroom ensuite got the lever version. The powder room got the push button version. The full flush mechanism works on both. The push button works for the limited flush while the lever version is unfortunately strictly full flush. I must reccommend that the green cable be made longer by and inch or two. In the American Standard both mechanisms are a very tight fit to the water supply float mechanisms. Order the push button version.

Scritto da: Hector Gomez

Second time

This the second time I buy this item. I got this the first time from a mayor store and I was very happy with it. It was not until a few weeks ago that it start leaking or say sealing properly anymore. So I said to myself: " it's being over 5 years now.. is time to get a new one". Installation Instructions are easy to follow and accurate enough.

Scritto da: Joe Brehm

4-1/2 stars

Rated for initial use vs durability as I've had it in operation for just a few months now. Works well. I will add that we retrofitted an older large American Standard and the small flush on the maximum setting doesn't always result in a complete flush (70% complete - 30% incomplete). I highly suspect it is due to the legacy toilet. Those with the older larger toilets beware, not that it is a deal-breaker. Other than that, it works 100% and seems it will be durable enough. Also as a side note, if you have to use the install shim you might have to turn the shim somewhat to get the device to sit straight and not leak. I would suggest Danco increase that small flush max setting a tad. The toilet itself is perfectly fine and should last another few decades. The thought of replacing to circumvent what is an easily-solved issue seems outlandish.

Scritto da: Amazon Customer

Perfect fit

Perfect fit, existing single lever flush toilet now has dual flush, well built and easy install.