DATA COMM gatenzaagborstel muurplaat - 2x2 in muur kabelbeheerplaat om laagspanningskabels te verbergen - laag profiel verzonken kabelplaat voor kabeldoorvoer - tv-draden achter de muur verbergen - wit wit - gatenzaagplaat

Name: DATA COMM gatenzaagborstel muurplaat - 2x2 in muur kabelbeheerplaat om laagspanningskabels te verbergen - laag profiel verzonken kabelplaat voor kabeldoorvoer - tv-draden achter de muur verbergen - wit wit - gatenzaagplaat
Brand: DATA COMM
SKU: 0660559008249
Price: 29.38 EUR
Availability: InStock

Brand:DATA COMM

3.8/5

€
29.38

De 1 3/4-inch gatenzaagplaat van DataComm Electronics wordt gebruikt om laagspanningskabels achter kleinere thuisbioscoop- en beveiligingsapparatuur te verbergen. Het onopvallende ontwerp van de gatenzaagplaat is ideaal voor het verbergen van verbindingen met componenten zoals luidsprekers, camera's en andere soortgelijke toepassingen. Metalen montagevleugels zijn in de plaat gegoten, waardoor een stevige houvast ontstaat en er geen montagebeugel nodig is.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0660559008249

Categorieën Tools & Home Improvement, Power & Hand Tools, Krachtgereedschap Onderdelen & Accessoires, Power Drill Parts & Accessories, Gatzagen & Accessoires, Hole Saws,

Met zijn slanke, onopvallende ontwerp past de Brush Plate naadloos in elk interieur. Of je nu kabels wilt wegwerken in een thuisbioscoop of vergaderruimte, deze plaat is de perfecte oplossing. 1-delig ontwerp gebruikt met 1 ¾ inch gat in de muur - borstelplaat is een veelzijdige oplossing voor het doorvoeren van wandkabels voor gestructureerde bedradingssystemen. Deze kabelwandplaat verbergt tv-kabels, biedt kabelbeheer en is een ideale kabelopbergset om kabels achter je muur te verbergen. De Borstelplaat B00Z8LM7MU is een hoogwaardig product dat eenvoudig te installeren en te gebruiken is. Het is een must-have voor iedereen die zijn kabels georganiseerd en uit het zicht wil houden. Deze borstelplaat is perfect voor gebruik in woningen of kantoren waar een strakke, professionele uitstraling gewenst is. Het kan eenvoudig op muren, plafonds of vloeren worden geïnstalleerd en is geschikt voor verschillende soorten kabels, waaronder HDMI-, coaxkabels en luidsprekerdraden. Kleine vierkante borstelplaat van 2 inch is een uitstekende oplossing voor het beheren en verbergen van lelijke kabels en draden. Gemaakt van duurzame materialen, wordt geleverd met ingebouwde borstels die kabels doorlaten en stof en vuil buiten houden.

Brand	DATA COMM
Color	White
Country of Origin	Vietnam
Customer Reviews	4.7 4.7 out of 5 stars 515 ratings 4.7 out of 5 stars
Department	Electronics
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	2 x 2 x 1.8 inches
Item model number	45-0006-WH
Item Weight	0.8 ounces
Manufacturer	DataComm Electronics
Material	Acrylonitrile Butadiene Styrene
Product Dimensions	2 x 2 x 1.8 inches
Style	White - Hole Saw Plate

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Eric Robinson

Size

Small size is perfect to hide behind my soundbar.

Scritto da: Marc

Good product. Price is too high.

(Item: DATA COMM Electronics 45-0006-WH Hole Saw Plate - White) (UPDATE): 03/12/23 I found these on Amazon by Monoprice (a brand I’m familiar with). They’re virtually identical. Though prices change all the time, these usually cost less. Monoprice Hole Saw Plate: https://www.amazon.com/Monoprice-118653-Hole-Saw-Plate/dp/B072BCKMQR/ref=cm_cr_arp_d_product_top?ie=UTF8 (ORIGINAL REVIEW): This mini wall mount is almost perfect. It’s just big enough for 3 wires and hides nicely behind whatever electronics you’re mounting to the wall. The wings on the back fasten well to drywall and hold the plate securely in place. And, it can be removed if needed (in case you need to change wires). I love it, except that it’s expensive. It should fairly be priced somewhere between $6-$8. It’s unfortunate as there are hardly any alternatives for a wall plate of this quality in this size. When buying for just one room, you won’t even think twice about the cost. But, when you’re buying for four (or more) rooms, you suddenly realize how expensive this piece is compared to other wall plates. While I would have loved to use these in multiple places in multiple rooms, these are a little too expensive for that ($13 at the time of the review) . Again, it’s a good quality wall mount plate and very easy to install. Just wish there was more competition in this size range. Monoprice Hole Saw Plate: https://www.amazon.com/Monoprice-118653-Hole-Saw-Plate/dp/B072BCKMQR/ref=cm_cr_arp_d_product_top?ie=UTF8

Scritto da: Helen Cope

Gets the job done

Used a couple for wiring kitchen cabinet lighting. Had to run wire through attic since kitchen cabinets sit on multiple opposite walls. Looks pretty great. Didn't need the larger pass through cable and these do a good job with their smaller profile. I knocked a star off for price. Feel like it should be a few dollars less.

Scritto da: z32pilot

Exactly as advertised

I purchased this product as a way to run the power cord and signal cable from the junction panel to my modem in order to hide the wiring in-wall. I used a floating shelf to position the modem above the panel with the datacomm port slightly above it. Installation was easy using the recommended hole saw bit and a drill - the datacomm fit snugly but did not require a lot of effort to position in the drywall hole. The flip tabs locked the plate securely with no gaps around the edges. The pass-through bristles are a bit stiff but well made, but a large plug head would be difficult to fit through the opening. My modem plug was a standard size and fit through well with the additional coaxial signal cable.

Scritto da: Alex D

Quality product, attractive and effective when managing 1 or 2 cables.

Just what I needed and hoped it would be. This is plate is small, attractive and very easy to see that is a quality product and very well made. Just make sure you follow the instructions and run the cable/s through the plate before actually installing it on the wall. I used it to hide a couple cables coming out of a sound bar I wall mounted. The wall plate completely disappeared behind the sound bar and giving me a very clean uncluttered installation. Even if the plate remains visible the black polished finish is attractive and a great cable management solution when wanting to hide 1 or 2 cables.

Scritto da: Amber

Cheaply Made but Good Enough to do the Job

Very easy to install. Cut a hole in the drywall, fish cables out of the wall and pass them through the Hole Saw Plate, place Hole Saw Plate in wall then tighten both screws. 4 star because the one of the tension devices bent instead of tightening but the Hole Saw Plate does stay mounted, just not a securely as I would have liked.

Scritto da: Amazonfan

Hope it’s less expensive

Need it. As expected. It’s a little pricey

Scritto da: Em’s

Problem Solved

Well made, worked perfectly!

Scritto da: Brandon

Worked beautifully

This is exactly what I was looking for. It's the smallest pass through wall plate I could find and it was extremely easy to install. It's significantly smaller than a normal wall plate or any other pass through plate or even wall grommet which makes it perfect for hiding behind sound bars and other small electronics. A 1 3/4" hole saw, as specified in the instructions, was the perfect size to install this. If you use the proper size hole saw and still have issues installing it it's because you're doing it wrong. Back off the screws, push them flush to the face plate and then fold the ears in until they're flush with the circular lip on the backside. The wall plate will then slide right in and you'll even have some room to spare. Don't overnighten the screws either. Just snug them up. You only want to stop the wall plate from moving. As for capacity, don't expect more than 3-4 cables to squeeze through it. Hdmi cables in particular will have trouble squeezing through once there are a couple of cables already in there.

Scritto da: Ken Elliott

Works like a hole in the wall

Cut 2 holes in drywall, inserted brush plates. I can now pass cables through successfully. Sheer brilliance!