Dremel 561 multifunctionele snijbit, medium multifunctioneel

Brand:Dremel

3.6/5

€
22.97

PRODUCTBESCHRIJVING Haal het meeste uit uw Dremel roterende gereedschappen door gebruik te maken van onze innovatieve en uitgebreide lijn van roterende accessoires en hulpstukken. Wat uw project ook is, wij hebben de perfecte oplossing voor u. Dremel-accessoires passen in uw rotatiegereedschap om de veelzijdigheid ervan uit te breiden. Of u nu wilt kerven, graveren, snijden, schuren of slijpen, er is een Dremel accessoire om de klus met uiterste precisie te klaren. Daarom zorgen onze speciaal gebouwde Dremel accessoires ervoor dat u uw project tot in het kleinste detail kunt uitvoeren. Dremel-accessoires zijn ook kleurgecodeerd in gebruikscategorieën, zodat u gemakkelijker het juiste accessoire voor uw project kunt kiezen. De Dremel 561 multifunctionele snijbit is ideaal voor het uit de hand zagen van zachtere materialen zoals zacht hout (minder dan 12 mm dik), gipsplaten, glasvezels, vinylbeplating, laminaat, aluminium en kunststof. Het snijbit heeft een 1/8 (3,2 mm) spiraalvormige gecanneleerde vorm. Gebruik met het 565 multifunctionele snijhulpstuk wordt aanbevolen; het hulpstuk is ontworpen om diepte te behouden tijdens het aanbrengen. Compatibel met alle Dremel roterende gereedschappen met en zonder snoer. U hoeft niet op zoek naar de juiste spantang, alle Dremel roterende accessoires hebben een standaard schacht van 1/8". VAN DE FABRIKANT Een hogesnelheidsfrees met een 1/8 stalen schacht. Ideaal voor het zagen van hout, kunststof, glasvezel, gipsplaten, laminaat, aluminium en vinylbekleding in een verscheidenheid aan toepassingen, zoals het voorbereiden van een gebied voor verlichtingsarmaturen of het maken van uitsparingen in kasten en lambrisering.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0080596010638

Categorieën Tools & Home Improvement, Power & Hand Tools, Krachtgereedschap Onderdelen & Accessoires, Power Rotary Tool Parts & Accessories, Cutting Wheels,

Voor gebruik met roterende gereedschappen die geschikt zijn voor een schachtmaat van 1/8. Gebruik met het 565 multifunctionele snijhulpstuk wordt aanbevolen; het hulpstuk is ontworpen om diepte te behouden tijdens het aanbrengen. Multifunctionele snijbit heeft een 1/8 (3,2 mm) spiraalvorm. Ideaal voor het zagen van hout, kunststof, glasvezel, gipsplaat, laminaat en aluminium en vinyl gevelbeplating. Verander uw rotatiegereedschap in een krachtige snijmachine.

Assembled Diameter	0.13 Inches
Assembled Diameter	‎0.13 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Dremel
Color	‎As the Picture Shown
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 3,779 ratings 4.6 out of 5 stars
Cutting Diameter	‎0.13 Inches
Finish	‎Steel
Included Components	‎Unit^Instruction Guide
Is Discontinued By Manufacturer	‎No
Item model number	‎561
Item Package Quantity	‎1
Item Weight	10 Grams
Item Weight	‎0.353 ounces
Manufacturer	‎Dremel
Material	metal
Material	‎metal
Measurement System	‎Inch
Part Number	‎561
Power Source	‎Hand Powered
Product Dimensions	‎32 x 2 x 0.5 inches
Size	Medium
Size	‎Medium
Style	‎Multi-Purpose
Warranty Description	‎No

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: observing

A very useful tool for drywall installation

Mostly, I used this bit with a dremel to do cut-outs in drywall for outlets. If you have intentions of doing the same thing, I would recommend the Dremel 565 Multi-Purpose Cutting Kit, also sold by Amazon, that includes three of these bits.

Scritto da: johnp

Perfect for cutting porcelain tiles

I need to cut a couple of slots in my shower tiles for the glass door hinges. This did a fantastic job!

Scritto da: Sly Green

Maybe my dremel wasnt high enough RPM....

This bit did not like my dremel, did not like the desk I was cutting a hole in. It smoked and burned the whole way. Again, possibly my fault with an older dremel, but I had little issue ripping steel with this same dremel.

Scritto da: Stewart

Worked great.

I was putting in a new window in my bathroom up above my bath tub. The outside of the house where I had to cut for molding was to close to the eave to use the circular saw. This worked out great to cut the upper part. It was about 1 1/8 inch cut.

Scritto da: Gina Evans

Does its job perfectly

Love this but - it is easy to use for my projects

Scritto da: Larns

Beautiful Gift

I freely admit that I bought this beauty for a friend. You see, I borrow a lot of tools - especially the tools I don't use that often. And that means that I'm inducing wear on someone else's equipment. Most people would just say "oh well, too bad, real tool owners don't loan out any tools". But regardless, I find that blades and bits and stuff wear out, especially when you run them through the wrong materials like metal nails. That's how this beauty came into my life - it is a replacement for another brand that I chewed to pieces. But not lets get into the details. First, the packaging is surprisingly beautiful. It's a simple yet effective blister-pack-on-paper, which protects the bit yet still shows it off. And yes, it deserves to be shown off. It's a fancy piece of machined steel, yet it looks like a fine silver when it catches the light just right. My lady was definitely a bit jealous when I said I was giving this piece of bling to a man-friend. In terms of cutting: It looks sharp, like it could go through some half-inch drywall without issue. However I cannot say if it will go through plaster. Remember that plaster is not drywall. Most people don't even know what plaster is, but once you live in a few 80+ year old homes you realize that drywall is kind of for babies, and that's just not because the 50 years of lead paint on old plaster. So do I recommend this? Without reservation. But buy a bunch. Because bits wear out when you force them through the wrong materials.

Scritto da: Jim Hasson

Works great

After a few practice runs and getting used to it, i like it a lot

Scritto da: Kelly Drope

A solid product but one small confusing decision

So the cutting edge doesn't exactly go to the edge. As a result when I use the sharp tip to puncture the wall and move it to cut, I have to extend the bit further in to get more cutting. In places where there is plumbing, ductwork, and studs this means pulling the bit out a bit to not damage it, which means the top part is cutting but the bottom part cannot cut and will effectively burn through friction its way through VERY VERY slowly. If the cutting edge went down to the tip of the bit I'd easily give this 5 stars but that seems like a weird choice. This is the only drywall cutting bit I could find also so I have no idea what's up. I was so reluctant to buy a drywall cutting tool just for small jobs and it ended up being a bit of a waste as I ended up using an engineer's scale with a boxcutter to do the remainder of the job.

Scritto da: Les

Over-rated

Again fittings for the dremel system are costly. It would not be so bad if they were quality bits but they are average.

Scritto da: Foxfire

Dremel 561 Multipurpose Cutting Bit

It is a Dremel Product, means quality, well worth spending the extra on a reliable tool. Does everything as described on the box

Scritto da: Ted

Good

Scritto da: Richard

Useful accessory

Ideal for a mini-router

Scritto da: LeviReviewsIt

Did a fantastic job

My tiling guy was a little too 'tight' with the tiles around the wall light outlet, and as a result the base of the sconce did not sit flat. I needed to remove about 1/2" of ceramic tile already set in place. Did a bit of research to work out what to buy, and this was the recommended product. Worked flawlessly, first time. What I like - Does exactly what it supposed to What I dislike - It seems excessively prices for what you get All things considered, I was pretty happy with this. My tile was about 1/4" thick, and this bit ate through it like butter. Would buy again!