Drill America 5-8 NPT pijptap, koolstofstaal, DWTPT-serie

Name: Drill America 5-8 NPT pijptap, koolstofstaal, DWTPT-serie
Brand: Drill America
SKU: 0887861076395
Price: 2021.03 EUR
Availability: InStock

Brand:Drill America

3.8/5

€
2021.03

Drill America DWTPT-serie Qualtech koolstofstalen pijptap is ontworpen om beschadigde of vastgelopen pijpdraden te reinigen en/of opnieuw in te rijgen. Het is geschikt voor het draadsnijden van een grote verscheidenheid aan materialen, zowel ferro als non-ferro. De nominale maat van een pijpkraan is die van de te tappen pijpfitting, niet de werkelijke maat van de kraan. De draad loopt 3/4 inch per voet taps toe. Alle pijpkranen zijn voorzien van een 2-1/2 tot 3-1/2 draadafschuining. NPT-schroefdraden vereisen het gebruik van een afdichtmiddel zoals Teflon-tape of pijpcompound. Ongecoate gereedschappen hebben alleen het basissubstraat zonder enige aanvullende behandeling of coatings en zijn geschikt voor een breed scala aan toepassingen. Rond met vierkante schacht. Gereedschappen met rechte groeven zorgen ervoor dat spanen zich ophopen in de groeven terwijl ze snijden en zijn zeer geschikt voor de meeste toepassingen bij ondiepe sneden. Rechtssnijdende gereedschappen hebben een snijdende werking die in werking treedt wanneer ze met de klok mee worden gedraaid.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0887861076395

Categorieën Industrieel & Wetenschappelijk, Cutting Tools, Taps, Pijpkranen,

Rechtssnijdende gereedschappen hebben een snijdende werking die in werking treedt wanneer ze met de klok mee worden gedraaid. Gereedschappen met rechte groeven zorgen ervoor dat spanen zich ophopen in de groeven terwijl ze snijden en zijn zeer geschikt voor de meeste toepassingen bij ondiepe sneden. Ronde schacht met vierkant uiteinde. Ongecoate gereedschappen hebben alleen het basissubstraat zonder enige aanvullende behandeling of coatings en zijn geschikt voor een breed scala aan toepassingen. Pijpkranen van koolstofstaal zijn ontworpen om beschadigde of vastgelopen pijpdraden schoon te maken en/of opnieuw in te rijgen.

Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	DWTPT5INCH
Manufacturer	Drill America
Product Dimensions	6 x 4 x 2 inches; 1 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Bill Lynn

Good for RV water heater

Our Forest River 27RWLS RV anode needed relacing. Threads corroded badly. This cleaned them perfectly. Will get a few more years out of this heater. Model SW6del. Videos on youtube helped.

Scritto da: Amazon Customer

Handy Thread Tap

Had a hard to get at water supply valve to a Cabin that I was going to have to replace. A small leak developed on the connection. Found this thread compatible sized tap to clean the rust/chlorides that had built up on the connection. "Chased" the threads, added pipe compound and reattached fitting. Saved me a lot of work in digging up the supply line. A priceless short cut well worth it!

Scritto da: Marco M

Good quality - good price

Did the job in cleaning rusted threads in a cast iron stack. Using it even just once saved me a lot of money.

Scritto da: ernesto

Good tap

Just what I needed to get the job done .

Scritto da: Paul Ramsden

Changing a pipe from NPT (tapered) to NPS

I fixed my pool pump connection by buying a tapered pipe coupling and changing it to straight.

Scritto da: Thomas K.

Worked great

Had to re-tap hole for anode rod in my RV water heater. Only took one pass. Requires oddball 13/16" socket.

Scritto da: Luis Q.

The durability of the tool

I ordered the wrong tool,I needed nps tap but ordered npt. Otherwise it was great.

Scritto da: Hyman Lipschitz, MD

This is not a Toy

The tap came packaged in a telescoping plastic tube similar to most other machine tool purchases. It was ordered to chase the threads on a welded-in female coupling in a steel tank that experienced a jam when attempting to attach a street elbow. This tap served its purpose very well. Of course, everything was cleaned as well as possible beforehand, and copious amounts of sulfurated RIDGID brand cutting oil was applied all during the chase. I was careful to only go a smidgeon after the cutting edges reached the "wall," and backed off around 180 degrees to clean the work. I removed the tap and cleaned it in a pan of solvent three or four times, making sure to brush out all the steel debris. I read reviews of this tool on Amazon and see how people mangled their tools by mostly being impatient. Running against the "wall" for 90 degrees is asking for trouble. With something this expensive you want to treat it like it was made out of gold.

Scritto da: Lorrick

A Good Product

A good Product and great value for money, a well made item

Scritto da: Jimbo

Attention RVers

Used this 3/4" NPT Tap to clean the threads for the Anode Rod on my Suburban Water Heater in my Motorhome. Used a little vegetable oil on the Tap for lubricant since regular petroleum based oils could possibly contaminate the water lines in the motorhome. The Anode Rod fits much better now and doesn't feel like I'm cross threading while installing. Good tool to have for future maintenance.

Scritto da: Andrew harrigan

Pool heater problem.

My drain plugs wouldn't screw back into my pool heater,I noticed the threads in the heater were rusted and damaged,l tried everything but still could not get plugs to enter the heater screw drain holes.I determined I needed a 1/4 -18npt tap and went straight To Amazon and found a carbon steel 1/4-18 not high quality tap which was delivered next morning.I gently retapped the drain holes and entered plugs with no problem.I opened up the pool and thanks to Amazon the family were back swimming.Amazon has never let me down love you guys.

Scritto da: S Horner

Good

I used this to re-thread an old copper waste pipe that had got messed up. It cleaned out the threads nicely, all shiny copper, and after that no problem with the new fitting.

Scritto da: Yohann S.

Stay away. Will do more damage than good

The media could not be loaded. Never seen a new tap in such bad condition. Don't buy it.