E-Z LOK DT-6 messchroefdraadinzetstuk voor houtinstallatiegereedschap met draaddoorn - 3/8-16

Brand:E-Z LOK

1.1/5

51.62

VAN DE FABRIKANT Met de Juno R38WH Live End Feed Connector in het wit kan de installateur trac van bovenaf voeden met flexibele leiding, BX, etc., of eindfeed in hangende systemen. Accepteert standaard 1/2-inch connector. De R38WH wordt per pakket verkocht en is een onderdeel van een compleet Trac-systeem. Alle componenten worden apart verkocht; een compleet systeem omvat rails, railrichtingen en/of hangers, eindvoedingsconnector en een verscheidenheid aan andere accessoires, afhankelijk van de installatiebehoeften. De garantieperiode voor alle JLG-producten is één (1) jaar vanaf de aankoopdatum. Al meer dan 30 jaar biedt Juno Lighting Group innovatieve oplossingen voor uw verlichtingsuitdagingen. Trac-verlichtingssystemen van het merk Juno bieden een ongeëvenaard aantal opties voor het verlichten van omgevingen van elk budget en elke toepassing. Dynamische lichteffecten tegen betaalbare prijzen, de producten uit de Juno Trac-Lites-familie bevatten trac-systemen en kits in de meest populaire stijlen. Kwaliteitskenmerken en aangename vormen vormen samen een betaalbare stijl voor hedendaagse interieurs. Door extra specificatieflexibiliteit te bieden, zijn alle Trac-Lites en Trac-Master trac en armaturen volledig compatibel met elkaar.

INSTALLATIE IS EENVOUDIG - Boor gewoon een gat en schroef een E-Z LOK-inzetstuk met schroefdraad op zijn plaats met dit optionele aandrijfgereedschap. VOOR GEBRUIK MET DRAADINSERTS - Dit gereedschap met schroefdraad is ontworpen om de installatie van E-Z LOK Knife Thread-inserts voor hout te versnellen. PAST OP STANDAARD BOREN - Een standaard zeskantschacht maakt het gebruik van dit boorgereedschap met schroefdraadinzet mogelijk met standaard boormachines en kolomboormachines. VERSNELT DE INSTALLATIE – Plaats snel mesdraadinzetstukken voor hardhout met dit optionele installatiegereedschap met schroefdraadinzetstuk. De doorn met volledige schroefdraad zorgt voor meer controle tijdens de installatie. INSTALLATIEGEREEDSCHAP MET SCHROEFDRAAD - E-Z LOK Doornaandrijfgereedschap met schroefdraad versnelt de installatie van messchroefdraadinzetstukken in hard hout.
Brand E-Z LOK
Fastener Type E
Item Dimensions LxWxH 2 x 0.5 x 0.5 inches
Material Carbon Steel
Size One Size

1.1

1 Review
5 Star
0
4 Star
0
3 Star
0
2 Star
100
1 Star
0

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Gerry M. Smith
Save your hard-earned money!
This tool does a poor job, for which you have better tools laying around your shop. My initial use was to install a brass E-Z LOK knife threaded insert in a piece of teak. The first thing I noticed was the non-standard drive on the tool. Logic would dictate a 1/4" hex quick-release (which is on the 5/16" version of this tool cutting the identical thread.) It's .3325" across the flats - too big for 1/4" or 5/16", too small for 3/8". a sloppy fit with a 9mm socket got me going again. When I tried to back the tool out of the seated insert, they were stuck together so that I had to remove the insert to retrieve the tool! No glue, no high torque, just some kind of dissimilar metals weirdness. Then I damaged the soft brass removing the steel tool (with rubber padding) in a vise. I found that a 3/8"-16 machine screw with a nut threaded on works much better and allows you to use a couple of wrenches on the nut and head against each other to unstick the insert. A FAR better solution. Learn from my mistake!

Gerelateerde producten

hot
3.7/5

€ 34.75

3.7/5

€ 34.75

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array