0
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister

Fluidmaster 400CARP5 Universeel PerforMAX-set zonder tankverwijdering, hoogwaardige toiletvulklep en verstelbare spoelklep-reparatieset inclusief klep, voor 2-inch toiletspoelkleppen

Brand:Fluidmaster

3.5/5

€
40.56

PRODUCTBESCHRIJVING De Fluidmaster 400CARP5 PerforMAX-verwijderingsset zonder tank helpt bij het verbeteren van slecht presterende en verouderde toiletten. De set bevat de stille, krachtige PerforMAX-toiletvulklep en de waterbesparende reparatieset voor de spoelklep. De spoelset bevat een 555C 2-inch toiletflap, instelbaar waterverbruik, snel te verwijderen en te plakken, eenvoudige installatie. Een universeel ontwerp dat op de meeste toiletmodellen past en de algehele prestaties van het toilet helpt verbeteren in één toiletreparatieset. De zeer duurzame en hoogwaardige constructie heeft een solide frame-flapper die niet buigt voor een goede afdichting, evenals corrosiebestendige materialen die de gebruiksduur verlengen. Fluidmaster voor hoogwaardige en hoogwaardige vervangende onderdelen voor toiletten. VAN DE FABRIKANT Fluidmaster, sinds 1957 de eerste keuze van de klant en voorkeursleverancier van toilettankafwerkingen. Presentatie van een complete lijn toiletreparatieonderdelen, waaronder; vulkleppen, spoelkleppen, flappers, tankhendels, dubbele spoelkleppen, komwas, toiletreparatiesets, afdichtingen, connectoren en meer. De productiefaciliteiten van Fluidmaster over de hele wereld bereiken meer dan 90 landen over de hele wereld met ongeëvenaarde kwaliteit. Fluidmaster blijft het #1 toiletreparatiemerk ter wereld, met onderdelen die in meer toiletten worden gevonden dan alle andere merken.

Hoeveelheid
Voeg toe aan winkelkarKoop nu

EAN: 0039961013248

Categorieën Tools & Home Improvement, Rough Plumbing, Toiletonderdelen, Toilet Repair Kits,

Duurzaam gebouwd inclusief 5 jaar garantie. Anti-sifonontwerp zal de watertoevoer niet verontreinigen. Meest geschikt voor 1.28 HET & 1.6 GPF toiletten gemaakt na 2005. Verstelbaar voor maximale prestaties en waterbesparing. Past op toiletten met een spoelklep van 2 inch, waaronder Kohler, Toto, American Standard en meer. PerforMAX 2”-reparatieset voor spoelkleppen - krachtig, stil en krachtig - inbegrepen, met toiletklep en afdichting. Eenvoudige installatie van de spoelklep met schil en plak. Universeel ontwerp past op de meeste toiletmodellen. Snel en eenvoudig te installeren, geen tankverwijderingsreparatieset verkort de reparatietijd in 1/2. Lost de meeste toiletproblemen op - vervangt slecht presterende of verouderde vulkleppen en gebarsten spoelkleppen.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Fluidmaster
Country of Origin ‎USA
Customer Reviews 4.4 4.4 out of 5 stars 1,027 ratings 4.4 out of 5 stars
Included Components ‎Rough Plumbing;Parts and Repair;toilet-repair-kits
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 17 x 7 x 14 inches
Item model number ‎400CARP5
Item Package Quantity ‎1
Item Weight ‎9.6 ounces
Manufacturer ‎Fluidmaster
Material Plastic
Material ‎Plastic
Part Number ‎400CARP5
Product Dimensions ‎17 x 7 x 14 inches

3.5

13 Review
5 Star
68
4 Star
19
3 Star
5
2 Star
3
1 Star
5

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Amazon Customer
Get it if you have a broken drain seat and don't want to disassemble the tank
I had a refill valve that was starting to fail in a toilet. I saw this kit was highly rated and promised ease of installation, so I tried it out. The kit is designed to be versatile and work for several toilet types. The flow valve is a standard float-based control. There's refill hose you attach to it to replace the one that the old valve used, and it attaches to the old overflow pipe with a refill clip. Then the kit also comes with a new flapper to replace the old one but it's affixed to this independent drain seat oddity that fits over the base of the old flush valve base. There's also a little roller valve attached to the refill hose, and a flapper adjustment, both intended to give you ways to save water. It works fine, but it's a bit as the kids say these days, a bit "extra". A bunch of the "innovations" here ended up being unnecessary or just didn't work for me. Here's where I had issues. - Refill hose: one end attaches to the fill valve assembly, that's fine. The other end they want you to put on a refill clip, which is sort of like a custom paper clip that hooks onto the old flush valve tube (you are not replacing the flush valve tube, just the fill valve assembly and the flapper). The instructions say not to put the refill hose directly into the flush valve tube, and the illustration shows the refill clip holds the refill hose just above the flush valve tube and points the flow into the tube. Conceptually, this is fine, but my old flush valve had a guide attached to the top with a place for the refill hose, so I didn't really need the clip, I was able to just reuse the old part. The way I did it was more intuitive and required fewer parts. - Flapper: Here's where things really got interesting. The underside of the drain set the kit comes with (with flapper attached) has an adhesive ring on the bottom. You peel off a paper to expose a sticky surface and then firmly press the drain seat onto the base of the flush valve. The adhesive like a putty, so it molds on and forms a nice seal. The issue is that the drain seat raises the level of the flapper a bit, so you're losing a bit of flow on the flush since the water doesn't drain as much (more water is left in the bottom of the tank). This was a real head scratcher...the new flapper has what appears to be standard dimensions, so if I have to retain the old flush valve tube, I could have just attached the new flapper on the base pegs the old flapper used. The extra drain seat isn't really necessary, although I suppose if you had a non-standard set of parts to deal with it might have been useful. The end result is that it works, but the flushes are quicker than they used to be. So I'm saving water and I didn't mess with the water saving adjustments yet. I think this new flush will work ok for a number 1, but for a number 2 you have to either hold the flush lever a second longer or flush twice, which is a hassle. I can adjust the fill level of the tank if I need to. The flow valve provides an easy way to do that. But if your toilet is standard, I don't know that this kit is better than a simpler one. I really only needed a new flow valve. A new flapper was probably ok too since the old one was pretty worn. But if the design causes the flush to be too insufficient, I may peel off the drain seat and transfer to the new flapper to the existing flush valve. This unit is probably best if you're forced to fix a non-standard drain seat, or a drain seat cracked on top and where the adhesive putty of the FluidMaster makes for an easier repair than dismounting the tank and replacing the whole drain seat; I think that was probably the primary use case for this kit.
Scritto da: P Lucas Johnson
Confident my wife could install by getting me to install
This is a good toilet flushing thingy that I didn't really need to understand too much to install myself. I feel that my wife, who prefers not to install things like this, would probably be able to figure it out... in an alternate universe where I wasn't around to get to do it. Pretty much a no fuss kinda thing to replace, at least with this. I will say I probably got this too short, but it works fine > maybe if you pay attention to the size that might be important to you. Worked out fine for me. Enjoy!
Scritto da: Lisa
This toilet kit does not have an overflow pipe
I like this product since it has the video instruction plus the paper which show you how to install it. The price is good , however I only give it 4 stars since it does not have an over flow pipe associated with it , so it is not completed set kit . Be aware , you have to buy an overflow pipe seperately
Scritto da: Amazon Customer
Works with older systems
I was worried this wouldn't work for my EXTREMELY old toilet, but I was pleasantly surprised! I had to just drop the bowl fill line down the built in tube in the tank instead of clipping it on like most newer systems but it still works like a charm. Very pleased with how easy this was to install. No leaks, everything sealed up properly. Thank you!
Scritto da: Paul Rupp
Easy install, stopped my leaking toilet
Install was really easy. I loved the fact that I didn't have to remove my tank, because the bolts that connect the tank to the bowl are so corroded and rusted I don't think I would have been able to get them off. My flapper died a horrible, disintegrating death, and a simple flapper replacement didn't work - after flushing, the new flapper wouldn't properly seal, so the tank never filled up. This kit solved the issue, and as a very small bonus it has an undisclosed feature (or at least one I didn't see when purchasing it) that allows the included flapper to select the amount of water to be used with each flush. This works, though I'm not positive I'll be using it as the lesser amounts of water just don't have the same "gravity power" to flush. That said, I can dial it down to about 6 and still successfully flush liquids and solids. If you replace your flapper and your toilet is still running it's quite possible the issue with your toilet is the flush valve, which this kit fixes. I highly recommend this kit!
Scritto da: Andy D.
Good enough.
I have been using it for months now, it works well enough. The install was BRUTAL. I had to resort to youtube videos to help make sense of the instructions - and even then - what a ridiculous amount of work. I probably should have hired a plumber. Took me 8 straight hours , sore wet hands, and a lot of trial and error to get this in.
Scritto da: Steve Hook
Easy to install yourself, no special tools needed
Good value, installs easily and works great.
Scritto da: Chan Ho Park
Great!
Good product. Love it
Scritto da: Mister Pants
Easy install, perfect fit.
Very easy to install, with good instructions included. I would totally recommend this version, since the flapper mount comes with sealing putty pre-mounted making it very easy to get a perfect seal against any type of flapper Mount whether it is horizontal or slanted. I like that it is adjustable in terms of bowl water level as well as tank water level and flush. Installed this with a FluidMaster flush handle in less than half an hour and it worked perfectly the first time no leaks and best of all, the periodic refilling of the tank caused by my lousy old flapper is gone!
Scritto da: Daniel Land
Easy fix
Good for the money, easy to install. Ok, it takes a while to fill the bowl and is a little loud, but a good product.
Scritto da: Jay
Works good
Fast delivery . Does the trick
Scritto da: true or not at all
good value
DIY repairs. Easy fit, good instructions, good quality. This is consistent with past performance with this product.
Scritto da: NS
My teenage son installed it -- works great
Seems pretty universal; was easy to install and adjust. Works great.

Gerelateerde producten

hot
American Standard 7301021-0070A tank-naar-kom-koppelingsset, veelkleurig
3.7/5

€ 40.82

American Standard 7301021-0070A tank-naar-kom-koppelingsset, veelkleurig
3.7/5

€ 40.82

hot
Danco HFX120 anti-sifon toilettank reparatieset
3.5/5

€ 67.14

Danco HFX120 anti-sifon toilettank reparatieset
3.5/5

€ 67.14

hot
Fluidmaster 2602G-008 universeel 2-inch tank-naar-kom-pakkingsysteem
4.1/5

€ 43.24

Fluidmaster 2602G-008 universeel 2-inch tank-naar-kom-pakkingsysteem
4.1/5

€ 43.24

hot
Next by Danco HWK130 HydroFit Total Premium reparatie-/upgradekit
2.9/5

€ 62.56

Next by Danco HWK130 HydroFit Total Premium reparatie-/upgradekit
2.9/5

€ 62.56

hot
Fluidmaster Bout- en pakkingset tank naar kom 6106
3.6/5

€ 28.47

Fluidmaster Bout- en pakkingset tank naar kom 6106
3.6/5

€ 28.47

hot
Plumb Pak K831-1 tankreparatieset, voor gebruik met 2-delige toiletten, kunststof, grijs/groen
3.2/5

€ 39.82

Plumb Pak K831-1 tankreparatieset, voor gebruik met 2-delige toiletten, kunststof, grijs/groen
3.2/5

€ 39.82

hot
Danco 88192 Tank to Bowl toilet reparatieset voor kraan Tank to bowl reparatieset voor kraan
3.3/5

€ 29.47

Danco 88192 Tank to Bowl toilet reparatieset voor kraan Tank to bowl reparatieset voor kraan
3.3/5

€ 29.47

hot
American Standard 7301476-100.0070A GESLOTEN KOPPELINGSKIT F/H2OPTIE TOILET
3.5/5

€ 63.34

American Standard 7301476-100.0070A GESLOTEN KOPPELINGSKIT F/H2OPTIE TOILET
3.5/5

€ 63.34

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array

Totaal:€ 0.00

Zie winkelwagenUitchecken

Categorieën

Alle categorieën
Menu Categorieën In de buurt van Winkelwagen

Menu