Gardner Bender GFI-3501 aardlekschakelaartester & circuitanalysator, 110-125V AC, voor GFCI / standaard / verlengsnoeren & meer, 7 visuele LED-tests, rood rood aardlekstekkertester & circuitanalysator (GFIC)

Brand:Gardner Bender

3.7/5

27.68

PRODUCTBESCHRIJVING Veiligheid is prioriteit nummer één op elk werkterrein. De testapparatuur van Sperry Instrument kan goed worden gebruikt om ervoor te zorgen dat elektrische apparatuur correct is geïnstalleerd en veilig kan worden gebruikt. De staat van elektrische installaties kan worden vastgesteld wanneer aannemers testapparatuur gebruiken. Elke testeenheid die kan worden gebruikt om een ​​toepassing te meten of te beoordelen zonder in contact te komen met een stroomvoerende geleider, is een noodzaak. Testapparatuur kan goed worden gebruikt om ervoor te zorgen dat elektrische apparatuur correct is geïnstalleerd en veilig kan worden gebruikt. Defecte installaties kunnen dodelijk zijn; de staat van elektrische installaties kan worden vastgesteld wanneer aannemers testapparatuur gebruiken. Sperry Instrument is verheugd een innovatieve, complete lijn van testapparatuur aan te bieden die is ontworpen om elektrisch werk sneller en veiliger te maken. De Ground Fault Receptacle Tester en Circuit Analyzer testen aardfoutcontactdozen door het circuit te overbelasten en de GFCI uit te schakelen. VAN DE FABRIKANT Test aardlekschakelaars door het circuit te overbelasten en de GFCI uit te schakelen.

Tests op aardlekonderbreking, open grond, open nulleider, open heet, heet/aarde omgekeerd, heet/neutraal omgekeerd en correcte bedrading. Opeenvolging van gele en rode lampjes geeft een indicatie van de circuitstatus of specificeert bedradingsfouten. De tester schakelt uit tussen 6-9 mA. Compact en gemakkelijk in gebruik. Tests: standaard stopcontacten, GFCI-stopcontacten, verlengsnoeren.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Gardner Bender
Brand ‎Gardner Bender
Color Red
Color ‎Red
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 2,429 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Rough Electrical^wire-terminals
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎2 x 1 x 3.5 inches
Item model number ‎GFI-3501
Item Package Quantity ‎1
Item Weight 0.05 Pounds
Item Weight ‎0.05 Pounds
Item Weight ‎0.8 ounces
Manufacturer ‎Gardner Bender
Material ‎- Select -
Measurement System ‎Metric
Part Number ‎GFI-3501
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎2 x 1 x 3.5 inches
Style Ground Fault Receptacle Tester & Circuit Analyzer
Style Ground Fault Receptacle Tester & Circuit Analyzer (GFIC)
Style ‎Ground Fault Receptacle Tester & Circuit Analyzer
Warranty Description ‎1 Year Warranty

3.7

13 Review
5 Star
77
4 Star
14
3 Star
5
2 Star
1
1 Star
3

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Richard
Excellent tool for anyone
Quick read on an electrical socket if ever in doubt. The LEDs (see product picture) tell the rest of the story. So easy to use!
Scritto da: Amazon Customer
I
Its small and a good thing to have when you need to know if electricity is running through your wires or not.
Scritto da: Monkeylair
The prongs were bent inside the packaging
It still works but I had to get a needle nose to bend them straight.
Scritto da: Amazon Customer
Easy to use
Easy to use, not easy to read some of the lights
Scritto da: RB
One Way Read
Some receptacles are installed upside down which make the unit hard to use & read.
Scritto da: Robert
Great tool!
I really like this tester. I have many outlets mounted upside down and this tester allows you to read the results on BOTH sides unlike some others on the market. Recommend!
Scritto da: nick lacey
Great information
Always wanted one. Works great nice to have around the house
Scritto da: Kazz
It worked as I had hoped it would
I have a bathroom outlet that is not a trippable GFCI and I had no way of knowing if it was wired in series with a GFCI and thus protected. I plugged the tester into the outlet, pressed the test button and sure enough the outlet became dead. I thought I just had to locate the primary GFCI and reset it. But when it would not reset I went to the panel The test button had also tripped a breaker in the panel. I recycled the breaker and then, of course, was able to reset the GFCI which in turn powered up the outlet I was questioning. So, yes, it did exactly what I wanted and saved me from unnecessarily replacing the outlet in question with a GFCI.
Scritto da: Doug Fox
Does what I need it to do.
This device works as intended. I checked a number of receptacles and a couple of GFIs. The receptacles were all determined to be wired correctly, but one of the GFIs wouldn't trip, so will have to be replaced. The legend used to read the indicator LEDs could be a bit easier to read (the yellow and white are too close in colour to be able to easily tell which is which). The most problematic thing is, as others have noted, it can be a struggle to get the device out of the receptacle when the test is done. I'm tempted to take my Dremel tool and reduce the thickness of the plug's blades.
Scritto da: Kel Varnsen
Super useful tool for homeowners
This device is extremely helpful when replacing outlets. I have an older home and over the years I have been changing out the older outlets to the newer style ones. This tester makes it easy to check my work and make sure everything is done correctly. It is also helpful if you have a situation where you want to be sure there is no power running to an outlet before you open it. Like if your breakers don't have labels or you are having problems you need to troubleshoot. Overall I am super pleased with this purchase.
Scritto da: P. Mourtos
I must be the unlucky one
Well, the reviews are great on Amazon so ordering one is a basic tester what can go wrong. Oh, yes it arrived open the box in anticipation find the first outlet plug the tester in, and voila the tester wouldn't fit in the outlet how that could be must be my outlet look for a second one same problem i tried to force it but it wouldn't budge. I must be the unlucky one. I return the product.
Scritto da: Dalton
Accurate, reliable and effective
I haven’t had one problem yet, I have owned this for about a year and works great every time, material is pretty durable but don’t run it over with a skyjack it doesn’t like those
Scritto da: Dave Blizzard
Read the review - tester hard to read
Comes with no manual or instructions. The key printed on the tester is printed so lightly that it appears on first look that all lights are marked as lit for all tests. The tester needs to be viewed in bright white light (not yellow or warm light as most indoor lights are ) to see the faint yellow marks. Beware...

Gerelateerde producten

hot
hot
Uitgangstesterkit, 2-delig
3.9/5

€ 59.44

Uitgangstesterkit, 2-delig
3.9/5

€ 59.44

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array