GRK RSS-185 10 bij 3-1/8-inch structurele schroeven, 50 schroeven per pakket - 772691121370

Name: GRK RSS-185 10 bij 3-1/8-inch structurele schroeven, 50 schroeven per pakket - 772691121370
Brand: GRK
SKU: 0772691121370
Price: 44.56 EUR
Availability: InStock

Brand:GRK

3.8/5

€
44.56

PRODUCTBESCHRIJVING GRK RSS Rugged Structural Screw heeft een gepatenteerd ontwerp en is gemaakt van speciaal gehard staal om klanten een hoge trek-, koppel- en afschuifsterkte te bieden. De scherpe draden en punten bijten direct in materiaal, inclusief hardhout, waardoor het splijteffect als gevolg van kleinere schachten wordt verminderd. De schroeven uit de GRK RSS-serie die 3-1/8-inch en langer zijn, hebben zes CEE-schroefdraden die het schroefgat voor het niet-schroefdraadgedeelte van het bevestigingsmiddel vergroten, waardoor het hout gemakkelijk kan bezinken en de treksterkte van de schroef toeneemt. De CEE-schroefdraad vermindert ook de wrijving op de schroefschacht, wat het aandrijfkoppel kan verlagen en splijten kan verminderen. De ronde kop met ingebouwd kopschild van het sluitringtype heeft geen scherpe randen zoals conventionele houtdraadbouten. De toegevoegde schouder onder de ring heeft de mogelijkheid om de RSS-schroef te centreren in voorgeboorde hardware zoals scharnieren en verbindingsplaten. De RSS-schroeven kunnen worden gebruikt als alternatief voor een vertragingsschroef. Sommige beschikbare maten zijn PHEINOX roestvrij staal. VAN DE FABRIKANT GRK RSS Rugged Structural Screw heeft een gepatenteerd ontwerp en is gemaakt van speciaal gehard staal om klanten een hoge trek-, koppel- en afschuifsterkte te bieden. De scherpe draden en punten bijten direct in materiaal, inclusief hardhout, waardoor het splijteffect als gevolg van kleinere schachten wordt verminderd. De schroeven uit de GRK RSS-serie die 3-1/8-inch en langer zijn, hebben zes CEE-schroefdraden die het schroefgat voor het niet-schroefdraadgedeelte van het bevestigingsmiddel vergroten, waardoor het hout gemakkelijk kan bezinken en de treksterkte van de schroef toeneemt. De CEE-schroefdraad vermindert ook de wrijving op de schroefschacht, wat het aandrijfkoppel kan verlagen en splijten kan verminderen. De ronde kop met ingebouwd kopschild van het sluitringtype heeft geen scherpe randen zoals conventionele houtdraadbouten. De toegevoegde schouder onder de ring heeft de mogelijkheid om de RSS-schroef te centreren in voorgeboorde hardware zoals scharnieren en verbindingsplaten. De RSS-schroeven kunnen worden gebruikt als alternatief voor een vertragingsschroef. Sommige beschikbare maten zijn PHEINOX roestvrij staal.

Geen eenheden beschikbaar

EAN: 0772691121370

Categorieën Industrieel & Wetenschappelijk, Nagels, Schroeven & Bevestigingsmiddelen, Collated Fasteners, Collated Schroeven,

Lag Screw-alternatief. Gepatenteerde Climatek-coating. Zip-Tip. Zelftappend W-cut schroefdraadontwerp. Gebruik GRK Bit T-25.

Batteries Required?	‎No
Brand	‎GRK
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 218 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Drive System	Torx
Drive System	‎Torx
Exterior Finish	Brass
Exterior Finish	‎Brass
Fastener Type	‎Self-tapping
Head Style	Round
Head Style	‎Round
Head Type	‎Round
Included Components	‎Screws
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	12 x 10 x 9 inches
Item Dimensions LxWxH	‎12 x 10 x 9 inches
Item model number	‎772691121370
Item Package Quantity	‎1
Item Weight	‎0.8 Pounds
Item Weight	‎12.8 ounces
Manufacturer	‎GRK
Material	Steel
Material	‎Steel
Measurement System	‎Imperial
Metal Type	‎Alloy Steel
Part Number	‎772691121370
Power Source	‎Air Powered
Product Dimensions	‎12 x 10 x 9 inches
Size	‎3.125 inches
Special Features	‎Paintable
Thread Coverage	‎Partially Threaded
Thread Size	‎#10
Thread Style	‎Right Hand
Usage	‎Wood
Warranty Description	‎Guaranteed against manufacturer defects

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Dan Cerkoney

Expected more.

I was relying on the shear strength for the bonds between 2x8s and cedar posts which were notched out for the 2x8. In other words the 2x8 resting snug in the post the screws three per post board to bond them together. A windstorm hit during construction. Upon inspection of 36 screws. 4 had snapped and 4 others bent. They were all removed in favor of a through bolt. The structure had no give in the screw failure locations. For the cost. I’d rather run a lag or bolt through. Which is what I usually do. I’m trying a different type of structural. I’ll review that one in time.

Scritto da: jim

Great screws

I love all GRK screws. It is my go-to screw for a variety of applications. I use these to drive 2x4 into 4x4 treated post. They are structural, so I consider these beefy enough for my needs. The washer head provides a more stable attachment.

Scritto da: Anthony

They’re the fastest driving screws I’ve used

These are soo much better than the stuff I’ve gotten at Home Depot. They drive super easy, they grab effortlessly, and no issues with stripped heads. Definitely worth it

Scritto da: LaVona E.

Good strong screws.

Making a junior (low) loft 4 ft high we have low ceilings. 8x8 feet wide and long. Used these screws for framing as I have back and neck problems and it’s easier to use the drill than hammering into thick wood. No need to drill pilot holes if you go slow at first.

Scritto da: Matthew D. Weaver

Best Screws

Lag bolts are a thing of the past in my shop. I can remember only one failure after using thousands of these screws. Made in Taiwan.

Scritto da: Paul

These screws are recommended by Simonton window company

A bit pricey but I got them fast. Their a great quality. Most installers use plan wood screws which are not recommended by Simonton. These screws are designed for vinyl windows.

Scritto da: Bike Geek

Strong, least likely to cam out or strip the head

I use GRK screws when I can (that is, when they are right for the application and the size I need is available). They are hardened so they will not twist apart under torque that and the heads will not cam out (and then strip out) like some other screws will (even with Torx heads). They are not indestructible, but they do seem stronger than Swan Secure, GripRite and other brands I have tried. It works as designed to drill _closer_ to an edge without splitting wood than other screws (as designed), but it has it's limitations. The down side is that they are more expensive than other screws, and they don't always offer the specific size I would like, but they make up for that many times over by the frustration they have saved me by not breaking or stripping out.

Scritto da: jg

Solid fastener

I have no idea of the 'structural' strength of these things as i'm not sure what test would actually prove it's strength. But in the field, it seems to be a very well made and easy to use fastener. I have driven roughly 50-60 of the 3 1/8" so far and not one has even hinted at wanting to strip out the head. They drive very easily in pressure treated 2 or 4x. .Because of their composition (hardened steel), they have the strength of a nail, along with the usefulness of a screw. You can't say that about ceramic coated exterior screws which will simply snap in half under the right conditions.

Scritto da: Amazon Customer

Structural screws

Great screws. A little pricey but worth it. They bring the wood tight against each other.

Scritto da: Aaron

Quality screws.

They work as described.

Scritto da: Neeraj Kanojia

Great quality structural screws

Very good quality screws. Replace lag bolts - save time by avoiding the need to pre-drill. I used these to anchor heavy duty 5” L brackets to the garage ceiling to create suspended overhead shelves.

Scritto da: Man Kwok

Unlike deck screws. It helped tightening the gaps.

I have a project to build garage shelves which drops from the ceiling. This RSS screw helped me to secure the beam tightly onto the ceiling. I think it has to do something with the built-in washer that helps pushing the beam. Regular deck screw wouldn't be able to close the gap between the ceiling's stud and the beam.

Scritto da: Lessard V.