HHIP 1011-0023 nr. 3 schroefextractor nr. 3 maat

Brand:HHIP

2.9/5

21.59

Nr. 3 Schroeventrekker (1011-0023) Snelle en gemakkelijke verwijdering van gebroken schroeven, pijpen, bouten en tapeinden zonder de schroefdraad in het gat te beschadigen. Gemaakt in de VS voor het verwijderen van schroeven of bouten maat 7/32-9/32. voor gebruik met een 5/32 boor.

Voor gebruik met een 5/32 boor. Voor het verwijderen van schroeven of bouten maat 7/32-9/32. Gemaakt in de VS!. Snel en eenvoudig verwijderen van gebroken schroeven, pijpen, bouten en tapeinden zonder de schroefdraad in het gat te beschadigen.
Country of Origin China
Item model number 1011-0023
Manufacturer HHIP
Product Dimensions 3 x 1 x 6 inches; 0.81 Ounces

2.9

6 Review
5 Star
60
4 Star
4
3 Star
10
2 Star
11
1 Star
14

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Frank
Worked great!
Worked like a charm on three small stripped screws.
Scritto da: Kindle Customer
It is functional
The most brutal way to remove a stripped screw but it works.
Scritto da: DanB
Screw Extractor bits not effective or user not experienced
I purchased these screw extractors to remove stripped deck screws from my deck boards. I attempted to drill a hole through the center of the screws to enable the extractors to bite into the metal of the screws and help extract them. I used different size drill bits and different size extractors to try to accomplish the extraction. However, I was not able to get any of the extractors (from the smallest to the largest) to bite into the screws so I could extract them. I removed some of the damaged screws by drilling a hole far enough into the screw so that a phillips head bit was able to extract them. For the remaining damaged screws I drilled out the entire head of the screws and removed it from the other side of the board. This is the first time I attempted to use these screw extractors and maybe I don't know the technique. I would appreciate any advice from the manufacturer.
Scritto da: David R Lee
Well-made. Many small diameter extractors break easily.
Arrived quickly and excellent quality.
Scritto da: drmaturin
You need a tiny handle
need a very small tap handle to turn.
Scritto da: Tim B
Worked to remove broken exhaust bolt in snowblower engine
I was doing some maintenence on my snowblower and wanted to replace the old muffler. The muffler is held on with two Philips head bolts and I could not get one of them off, I ended up stripping the slots. I tried a pair of vice grips and completely ruined the head. I found this screw extractrbamd decided to try it. While waiting for it to arrive I kept spraying the bolt with pb blaster hoping it would penetrate the threads and help it loosen. I drilled a hole down into the bolt then used this extractor and the bolt finally came out.

Gerelateerde producten

hot
Koop Iron 16023 3/8 aandrijfbouttrekker
3.5/5

€ 44.17

Koop Iron 16023 3/8 aandrijfbouttrekker
3.5/5

€ 44.17

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array