Hopkins Towing Solutions 47815 plug-in eenvoudige rembedieningsconnector

Name: Hopkins Towing Solutions 47815 plug-in eenvoudige rembedieningsconnector
Brand: ‎Hopkins Towing Solutions
SKU: 0079976478151
Price: 50.14 EUR
Availability: InStock

Brand:‎Hopkins Towing Solutions

3.6/5

€
50.14

Hopkins Manufacturing Corporation maakt uw sleepervaring eenvoudiger en lonender door innovatie en waarde. Hopkins biedt een verscheidenheid aan trekoplossingen, waaronder kabelsets voor voertuigen, adapters, voertuig- en aanhangwagenconnectoren, ontsnappingssystemen en nog veel meer. Tegenwoordig wordt meer dan 40 procent van de omzet in de detailhandelscategorie gegenereerd door Hopkins-innovaties. Voltooi het werk goed om jarenlang probleemloos te kunnen presteren met de juiste connector.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0079976478151

Categorieën Home & Garden, Tiers, Trekkeraccessoires, Brake Controls,

Geen snijden, geen splitsen, geen zorgen. Connectoren voor snelle installatie of verwijdering van Hopkins-rembedieningen. Maakt gebruik van OEM-connectoren, perfecte pasvorm. Gewoon aansluiten op de connector van uw voertuig en op uw rembediening splitsen. Voor voertuigen die zijn uitgerust met een af fabriek trekhaakpakket.

Brand	‎Hopkins Towing Solutions
Country of Origin	‎Mexico
Customer Reviews	4.6 4.6 out of 5 stars 184 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Exterior	‎Smooth
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎47815
Item Weight	‎3.2 ounces
Manufacturer	‎Hopkins Towing Solution
Manufacturer Part Number	‎47815
Model	‎47815
OEM Part Number	‎47815
Product Dimensions	‎5.88 x 2.88 x 1.75 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: mrslim

Heavy duty

This is much higher quality than most stock wiring. Great replacement upgrade.

Scritto da: Traveler

Works exactly as expected.

This was an open box item at about half the cost. It was perfect and works exactly as advertised and expected.

Scritto da: Jeremy L. Fortune

Non-standard wiring color code

The connector seemed decently solid although not quite as stout as the OEM Ford connector it replaced. The molded cable was nice and the length was good for my purpose. Installation was easy. I just drilled a 2" hole in the steel bumper next to the license plate and then used self tapping screws to attach the connector. I then ran the attached molded cable to the wiring harness where the OEM trailer wires were and soldered / heat shrinked them matching like colors. The problem I encountered was that the color code is different inside the connector than any standard trailer wiring scheme. It's even different than the color code I got from Hopkins' website for this very connector. I don't remember the exact color code but I do remember that the center pin was yellow when it should be purple or black. Here's what the standard code should be... Ground - White 12V supply - Red (or orange) Reverse - Purple (or black) Brake - Blue Left turn - Yellow Right turn - Green Tail - Brown A standard wiring diagram can be found here... http://www.etrailer.com/faq-wiring.aspx

Scritto da: Traveler74

Plug & Play

I have a 2011 Toyota Tacoma, which this was designed for. I decided to buy this, so I can get a brake controller. So if I have to tow a camper or whatever. My owners manual said where the factory installed plug would be located. Right behind the left kick panel. I have a aftermarket remote starter on my truck,. That is where all of the wiring is hidden. making it harder to find my plug. Once I found the plug, I had to carefully pull it down from behind the starter wires. The factory doesn't give you much wire on the factory plug. But once lined up, it was a quick snap & connector was hooked up. Just need to get a controller now.

Scritto da: Capncavedan

Lid does not hold trailer's 7-pin cord in place securely

Replaced factory 7-pin socket on a 2011 Mercedes ML350 with this one, as I wanted to upgrade the charge and ground wire size to send more power to the trailer. The ML350 has a slightly awkward arrangement where the socket points down to the pavement at a pretty good angle - however, the factory socket held on to the trailer's cord without issue. The Hopkins socket loosens up and we lose electrical connection to the trailer (no lights, no trailer brakes) after just several minutes of driving. You can see in the photo what we had to do to get to our destination with connection intact. We've been unable to get this product to work satisfactorily in this regard. I will replace it with a Curt socket.

Scritto da: Seals

Easy and great value.

Great value, easy to install once you dig through the wires inside my truck ( that took 5 times longer than Installing the brake controller) I install mine using velcro and not the supplied bracket.

Scritto da: Nina

Plug-In Simple is just that

This is the Plug-In Simple connector (with both plug ends and 4 wires) and it is just that. Plug in to your brake controller, plug in to your vehicle's connector - done. It takes more time to remove the access panel to the vehicle's plug. Minus 1 star because I think it is a bit overpriced and made in Mexico. However, it was less expensive than in the stores and they don't carry this one for Toyota, usually only Ford and GMC. Credit to Hopkins for not changing plug styles for their brake controllers. This fits my 13-year old Impulse controller, which works just fine since it hasn't been used a lot anyway.

Scritto da: Pop Popper

project

Hope it will work well.

Scritto da: Ht

Five Stars

Very easy hookup to existing wire harness. Have put the controller to good use, and the cable works great!

Scritto da: Tag you it

Five Stars

works