Hubbell Raco 936 4 inch ronde retro-brace plafondventilator-geclassificeerde ondersteuning, 4 inch, grijs

Name: Hubbell Raco 936 4 inch ronde retro-brace plafondventilator-geclassificeerde ondersteuning, 4 inch, grijs
Brand: Raco
SKU: 0050169009369
Price: 53.96 EUR
Availability: InStock

Brand:Raco

3.7/5

€
53.96

RACO 936 936/935 PLAFONDVENTILATORBOX EN ONDERSTEUNING wordt gebruikt om plafondventilatoren en verlichtingsarmaturen veilig tussen balken of constructiedelen te hangen in oude werktoepassingen waar de toegang beperkt is. Brace maakt eenvoudige uitbreiding mogelijk, verstelbaar van 16 tot 24. Aanbevolen ondersteuningsbelasting voor plafondventilator is 35 pond, voor armaturen is 50 pond. 4 zijkanten van een halve inch, drie knock-outs aan de onderkant. Bevestigingsmateriaal met zeer sterke, geharde schroeven en instructies inbegrepen. Aanvaardbaar voor gebruik in muren en plafonds van 2 uur. UL-vermeld.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0050169009369

Categorieën Tools & Home Improvement, Lighting & Ceiling Fans, Plafondventilatoren & Accessoires, Ceiling Fans,

GEMAKKELIJK TE INSTALLEREN: De grondschroef aan de voorkant, de unieke montagevoeten, de klikbeugel en de sleutelgaten in de doos maken huisverbetering in een handomdraai. Installeer de montagebeugel van uw plafondventilator in een mum van tijd. KWALITEITSPRODUCTIE: Elk onderdeel van onze plafondventilatorverlichtingsset is gebouwd en getest volgens strikte specificaties en industrienormen. Het voldoet aan de cULus-, ANSI- en NEMA OS1-classificatie voor veiligheids- en duurzaamheidsnormen. STEVIGE ONDERSTEUNING: Geniet van een sterke, zorgeloze versteviging voor uw plafondventilator of lamp. Zorg voor een solide verankering voor plafondventilatoren tot 70 lbs of voor plafondlampen tot 110 lbs. VERSTELBAAR VOOR DRAAGRUIMTE: Onze oude elektriciteitskast is verstelbaar voor beperkte ruimte tussen de balken, zodat u bespaart op renovatie. U kunt de beugel uitbreiden van 16 tot 24 inch in lengte zonder gereedschap te gebruiken. ONTWORPEN VOOR RESTAURATIES: Onze Hubbell RACO RETRO-BRACE 1.5-in. Diepe plafondventilatorbox voor oud werk is speciaal ontworpen om plaats te bieden aan armaturen van oudere modellen, zodat u de originele inrichting kunt behouden.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Raco
Certification	‎UL, ANSI
Color	Gray
Color	‎Gray
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 1,223 ratings 4.7 out of 5 stars
Included Components	‎Motor-accessories
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	14 x 4.22 x 2.78 inches
Item model number	‎936
Item Package Quantity	‎1
Item Weight	2 Pounds
Item Weight	‎2 pounds
Manufacturer	‎Hubbell
Material	Steel
Material	‎Steel
Mounting Type	‎Ceiling Mount
Number Of Pieces	‎1
Part Number	‎936
Pattern	‎Support
Product Dimensions	‎14 x 4.22 x 2.78 inches
Size	‎4 in.
Style	‎Old Construction
Voltage	‎120 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Jeff Murray

As Advertised

Worked great to install a ceiling fan in my sons room very solid.

Scritto da: Ryan W. Radtke

Yup. Easy to retro fit a fan

Easy to install and sturdy.

Scritto da: Bruce H

Sturdy solution to a new ceiling fixture

I had to install a new ceiling box in a dining area that didn't have a ceiling light and no access to the space above. This can be installed through the hole and is hefty enough to hold more weight than I needed. It took a little fussing with it to get the legs to sit properly with insulation interfering with their movement, but it worked and is doing the job I needed it for.

Scritto da: Crystal B

Husband was very happy!

We added a light in our room 2 years ago. Husband: “Are you SURE you’re not going to want a ceiling fan?????” Because now is the time to put a brace in for the ceiling fan…” Me: “No babe. Let’s do a little chandelier. I don’t need a fan. I promise I don’t want a ceiling fan!” A year later. “Hmm I kinda want a ceiling fan.” Kept that to myself. Two years later. Me: “Hey honey, can we put in a ceiling fan???” Hubby: “SEE!! I knew it!! I should’ve listened to myself and put in the brace!! You know I have to crawl back into the attic —“ Me: “No yea, totally. That’s not good.” I almost gave up on my dream of having a ceiling fan and then I found this retro brace when desperately trying to find a solution to get a ceiling fan in our room (early menopause ????). I shared this with my hubs and he begrudgingly agreed to try it. He never had to go in the attic!!! And was so impressed by the brace and how easy it was that he’s thinking of switching out a couple other fixtures for ceiling fans. My husband, myself and my hot flashes thank you!!!!

Scritto da: StewartB

Worked better than advertised.

I just purchased two ceiling fans for my garage. These fans are replacing two original light fixtures. The light fixtures were not strong enough for a ceiling fan, so I purchased two of these kits. I just finished installing the first one. This fit fine for a 24" span. The original electrical box was nailed to the truss. I was suprised how closely I could get the new box to the truss plate. It is very adjustable. Also, one side is sitting on a truss plate and this holds on to the truss plate just fine. This support is strong, even at the 24" width. It is definitely going to work for the 52" fans that I have. The fan doesn't wobble or move a bit. It feels SOLID. This support was very easy to install. I've never done this before, and the hardest part was enlarging the hole in the drywall. I am very happy and I will buy this again the next time I install a ceiling fan. Hope this helps.

Scritto da: randy21m

Hubbell 936 Ceiling Fan Box and Support

+1 - Item arrived on time, and not damaged +1 - Item is as described +2 - Item installed as it should, and I had no issues mounting a ceiling fan to it -1 - Installation was harder than it needed to be, and there were no separate instructions. Just some brief/poorly written instructions on the side of the box Thoughts: If you're looking at something like this, hopefully you've done your homework on what it is you're wanting to install, what type of access you have, how deep your ceiling is, where your studs are, etc? Helpful hint, check for cross studs. Just because you've determined that your studs are running one way doesn't mean that the builders didn't put a cross stud in - right where you wanted to put your hole. All in all, installation wasn't difficult. Cut my hole, extended the bar out to the 24" marker that was on the threads (helpful - there's also a 16" mark), shoved it in, made sure the feet were in the downward position, twisted until it was tight and it was difficult to turn the bar. The part that made installation a bit difficult was the bracket you slide onto the bar. There's nothing to hold it onto the bar, you just put your keyhole screws in, put the box up and hope you don't push it off the bar - which I did a couple of times. I ended up pinching the ears in the middle to hold the bracket in place - even though the instructions didn't say to do that. Once I did that I was able to align the keyhole screws, and complete the installation. The punchouts on the gang box were pretty sealed. I ended up having to take a mini sledge hammer to it to get it to punch open. If you're having difficulty getting the wire to feed through the tensioner, strip your wires out of the main jacket then feed it through. Overall it was pretty easy to install. This was my first bracket install without attic side access, and I successfully did it. The next one will be even easier.

Scritto da: Amazon Customer

deep Pockets!

The unit is very sturdy as described, but the receptacle is rather deep... my particular application ended up being capable to mount direct to stud, so the box stuck out too far.... had to by a 1/2 shallow box. THIS unit is great if I was able to get between two joist though. would recommend since very well made and sturdy.

Scritto da: Michael Maddux

Worked for what I needed.

I needed to place a light in between the roof rafters on a trailer. The existing box was an old work box and the celing broke out around the box tabs making that style unusable. I decided to try this box. It did work for what I needed but I never got it to tighten up on the rafters. It continued to move quite a bit. Not a problem for holding a light , but I wouldn't have trusted a fan on it. I will say I'm nit sure it is the boxes fault. The way the rafters were, they were smaller than normal and I think that the smaller service area make it not grab as good.

Scritto da: Comoxio

Excellent Quality

Strong and well built. Very easy to install even in tight spaces like my cathedral ceiling.

Scritto da: Private Name

Stable! Stable! Stable!

I installed a 52" ceiling using this product and it hold perfectly. im a DIYer and its easy to install and use. No wooble no vibration.

Scritto da: Kevin G

Built well and versatile. A real time saver.

Appears to be very well made. I replaced a ceiling light with a ceiling fan. While the photo only shows an installation where the box is centered, lights/boxes are usually next to, or fastened to, a truss or joist, not centered between. Regardless, this product works for either application. This product saved me having to crawl up into my attic, remove insulation and either fit a wooden brace between two trusses or purchase a special box to screw solidly to the joist. It took me minutes to install this unit. My only concern or critique is that the barbs on each end might be slightly longer to pierce the wood deeper for a better grip. I may be concerned about nothing but if I were to improve the product that would be my only suggestion.

Scritto da: Amazon Customer

Great design. Solid.

Great product. Easy to install. Holds the heavy chandelier no problem. This product saved me a ton of work and grief. It was easy to install even with the minimal instructions. I do wish it had an extra bonding provision. But overall I would recommend this product.

Scritto da: Williebe99

FANTASTIC ❣️❣️????❣️

This is best product I’ve ever bought from anywhere!!