Ingersoll Rand 300G Edge Series 6 excentrische schuurmachine met 360 graden draaibare vacuümadapter, krachtige motor van 1/5 pk, lichtgewicht, weinig trillingen, diffuus achteruitlaat, zwarte 300G excentrische schuurmachine

Brand:Ingersoll Rand

3.7/5

178.43

PRODUCTBESCHRIJVING Ingersoll Rand Edge-serie 6-inch excentrische schuurmachines hebben een krachtige 1/5HP-motor die wervelvrije resultaten produceert. Het is vervaardigd met een lichtgewicht, trillingsarm composietontwerp en uitgerust met een voorgevormde handgreep voor comfortabele bediening. De schuurmachine wordt geleverd met een 360 graden draaibare vacuümadapter voor meer bewegingsvrijheid zonder verwarde slangen of snoeren. Het is een deal voor hoogwaardige afwerking in autocarrosserie- en houtbewerkingstoepassingen. Stof en deeltjes worden afgezogen door de 6-inch pad van de schuurmachine en weg van uw werk. Sluit de schuurmachine aan op een centraal of draagbaar stofzuigsysteem met behulp van de 360 ​​graden draaibare vacuümadapter. De schuurmachine heeft een baandiameter van 3/16 inch, is 7,5 inch lang en weegt 1,9 pond. Dit gereedschap is zeer geschikt voor het voorbereiden van metalen en houten oppervlakken voor schilderen en afwerken. Stof en deeltjes worden afgezogen door de 6-inch pad van de schuurmachine en weg van uw werk. Sluit de schuurmachine aan op een centraal of draagbaar stofzuigsysteem met behulp van de 360 ​​graden draaibare vacuümadapter. 300G Excentrische Schuurmachine In één oogopslag: * Brengt een wervelvrije afwerking aan op metalen en houten oppervlakken * Zuigt stof en deeltjes op via een 6-inch pad * Kan worden aangesloten op centrale of draagbare stofzuigsystemen * Ondersteund door een beperkte garantie van één jaar De 300G excentrische schuurmachine biedt een voorgevormde handgreep voor meer comfort. Kenmerken van dit gereedschap zijn onder meer een diffuse uitlaat aan de achterkant. 6-inch pad om stof weg te houden De Ingersoll Rand 300G excentrische schuurmachine is ontworpen om stof en deeltjes op te zuigen via het 6-inch pad, waardoor de motor. Het resultaat is dat vrijwel al het stof direct van uw werk wordt afgevoerd, wat bijdraagt ​​aan een hoogwaardige, wervelvrije afwerking. Vacuüm-gereed ontwerpDeze vacuüm-ready, trillingsarme schuurmachine is ontworpen om aan te sluiten op centrale en draagbare vacuümsystemen. Bij de schuurmachine wordt een 360 graden draaibare vacuümadapter geleverd die een groter bewegingsbereik biedt zonder verwarde slangen en snoeren. Lichtgewicht en toch stevige constructie De Ingersoll Rand 300G excentrische schuurmachine heeft een trillingsarm composietontwerp en is, net als alle Impactools uit de Edge-serie van het bedrijf, uitzonderlijk robuust en licht van gewicht. Andere hoogtepunten zijn een baan van 3/16-inch, een motor van 1/5 pk, een diffuse uitlaat aan de achterkant en een voorgevormde handgreep. De schuurmachine is 7,5 inch lang en weegt 1,9 pond. Over Ingersoll-RandIngersoll Rand is een wereldwijd, gediversifieerd bedrijf dat producten, diensten en oplossingen levert om de kwaliteit en het comfort van de lucht in huizen en gebouwen te verbeteren, voedsel en bederfelijke waren te transporteren en te beschermen, huizen en commerciële eigendommen te beveiligen en de industriële productiviteit en efficiëntie te verhogen . Gedreven door een 100 jaar oude traditie van technologische innovatie stelt Ingersoll Rand haar klanten in staat om vooruitgang en een positieve impact in hun wereld te creëren. Wat zit er in de doos Ingersoll Rand 300G excentrische schuurmachine en 360 graden draaibare vacuümadapter. Met de 300G excentrische schuurmachine kunt u een wervelvrije afwerking bereiken voor uw houtbewerkings- of autocarrosserieproject (klik om te vergroten). VAN DE FABRIKANT Dit model is geschikt voor vacuümgebruik en trillingsarm en produceert een zeer hoogwaardige afwerking en kan worden aangesloten op centrale of draagbare vacuümsystemen. De 300G zuigt stof en deeltjes op via de pad, waardoor vreemde voorwerpen uit de buurt van de motor worden gehouden. Vrijwel al het stof wordt direct van het werk afgevoerd. Onderdeel van Ingersoll Rand's Edge Series luchtgereedschap: legendarische prestaties voor een betaalbare prijs. Bekijk meer

BETROUWBARE BETROUWBAARHEID: Duurzaam ontwerp zorgt ervoor dat dit gereedschap werkt zoals u verwacht, elke keer dat u de trekker overhaalt; Elk onderdeel, mechanisme en functie is grondig getest om langdurige prestaties te garanderen. TOEPASSINGEN: Deze pneumatische schuurmachine is zeer geschikt voor houtbewerking en autocarrosserieprojecten, omdat hij metalen en houten oppervlakken voorbereidt voor schilderen en afwerken. GEDIFFUSEERDE UITLAAT ACHTER: Het gereedschap zuigt stof en deeltjes op via het 6-inch kussen, waardoor vreemde stoffen weggehouden worden van de motor en weg van uw werk, wat bijdraagt ​​aan een hoogwaardige, wervelvrije afwerking. LICHTGEWICHT MAAR STEVIG: Schuurmachine heeft een trillingsarm, composiet ontwerp dat uitzonderlijk robuust en licht is; Het meet 7,5 inch lang en weegt slechts 1,9 pond. VACUÜM KLAAR: IR's EDGE Series 300G 6 excentrische luchtschuurmachine is ontworpen om aan te sluiten op centrale en draagbare vacuümsystemen; 360 graden draaibare vacuümadapter wordt meegeleverd voor een groter bewegingsbereik zonder verwarde slangen en snoeren.
Amperage Capacity 4.5 Amps
Amperage Capacity ‎4.5 Amps
Batteries Included? ‎No
Batteries Required? ‎No
Brand Ingersoll Rand
Brand ‎Ingersoll Rand
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 1,539 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Grit Number ‎1
Grit Type Medium
Grit Type ‎Medium
Included Components ‎Case
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 8 x 6.5 x 4.75 inches
Item Dimensions LxWxH ‎8 x 6.5 x 4.75 inches
Item model number ‎300G
Item Package Quantity ‎1
Item Weight ‎1.2 Kilograms
Item Weight ‎2.64 pounds
Manufacturer ‎Ingersoll Rand
Part Number ‎300G
Power Source Gas Powered
Power Source ‎Gas Powered
Product Dimensions ‎8 x 6.5 x 4.75 inches
Size ‎6-Inch
Special Features ‎Lightweight
Style ‎300G Random Orbit Sander
Warranty Description ‎1 Year Limited Warranty

3.7

13 Review
5 Star
77
4 Star
14
3 Star
4
2 Star
2
1 Star
3

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: John Kirby
Decent feeling tool for the price
Balance seemed to be off, I thought I may have been the pad so I got a new pad for it and still feels the same. I'll keep it around but won't be my go to one
Scritto da: Batch75
Great quality
I have always wanted an inline sander. If I would have know how nice this sander was I would have gotten it many years ago. It is well built and operates great. Not disappointed at all. What a work saver.
Scritto da: Lillie
It’s for sticky sandpaper
Does not say if it’s for sticky or Velcro sandpaper and needed a Velcro backing plate in the picture you can’t tell but says it’s universal it’s definitely for sticky and it’s a little heavy to the hand
Scritto da: David Zenonos
Nice product
The media could not be loaded. Works great, just disappointing instructions and parts/accessories. The website is non existent. I brought a hook and loop pad and swapped out the original pad and it works great so far..Also make sure you have good size compressor to get the full power of this unit.
Scritto da: MCook
Great tool, consumables could be a little easier to change
I like this guy. Always wanted one but hadn’t pulled the trigger until recently. I’ve always used 4 1/2” flapper discs and 2” roloc discs to prep and finish metals. Though they’ve served me well, this unit actually brings some capabilities to the table the others didn’t have. The disc’s flexibility combined with the high RPM makes it king at fast and controlled metal removal be it metal shaping or surface prep. Discs don’t last as long but honestly, that’s a pro not a con because the sanding power ends up more consistent. This unit feels extremely durable and runs very smoothly. It feels like it should last a lifetime. If I were to pick an opportunity for improvement, it would be how you remove the discs. The nut (if you can call it that) must be loosened by a fork like tool while you use a rod to keep the spindle from spinning. Though it’s not difficult, it’s not easy making it not fast either. Since you switch out consumables more frequently on this tool, it quickly becomes something you’ll feel could be a little easier..
Scritto da: Sparky
Excellent sander
Only comparison I have is to a HFreight one I bought that stopped working then I bought another and same issue. I bought the ingersol and immediately put it to use and it just purrs and is smooth. It’s sanding action and noise is like day and night to the HF brand. I should had bought it first. One downside though. No instructions of how to disassemble and put back together. I was hoping it had instructions becouse HF not and I took one apart and spent hours trying to get the gears timed to air valve with no success. So if you going to take one apart be sure to push the track all the way to front or back then gently remove side rails and gently tip the body away from track while placing a dot of fingernail polish on the gear tooth and gear track. Do this for all gears. Oh and yes the air valve gear will try to fall out as you tip the body so use a feeler gauge or thin metal strip to hold it up and paint it first. You do this and you may have a 50% chance if getting it back together. My experience is with HF. I have not had to disassemble ingersol yet and hopefully never will.
Scritto da: B
A inline Dryer is needed with this tool: https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Dtools&field-keywo
Product delivers in all respects. Some people have stated that the unit seems to freeze up or overheats which is wrong, the unit works off of dry air, with out any moisture. Any air system used that does not have a dryer inline will be plagued by intermittent use, as it looses power due to moisture droplets in the air freezing up and clogging the small internal airports internally This is what is required to get to ensure consistent nonstop usage: https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Dtools&field-keywords=air++compressor++inline++dryers Bottom line, if you use a inline dryer to accommodate the volume of air required, and oil as the instructions say, this tool works flawlessly................................ Disobey the instructions, and any tool will fail you.
Scritto da: DrFilamento
Avoid self adhesive paper.
This is a great tool. I'm using it on a large curved panel (120 sq ft) and it's making it possible for me to sand this flat and shape the corners. Ordering the sandpaper rolls on Amazon for it is convenient, but unfortunately they are the self adhesive type. The adhesive is quite strong and they tend to tear the delicate neoprene pad when the paper is removed. I already have a bunch of these rolls of PSA and to be able to use the sticky paper I glued a rubber sheet to the neoprene pad. The rubber is cut from a bicycle inner tube and I used contact adhesive rubber cement to glue it down. The rubber doesn't get torn when removing the paper. This works but it would be much easier to use non sticky paper. Another review suggested the paper might shift. I don't believe that. The clamps are very strong.
Scritto da: Shafil
Needs oil prior to use!
I was having the same issue as other people, tool stalling after a few minutes of continued use. After doing some research I found that they ship the tool with no oil, after adding oil (Ingersoll Rand 50P) it works AMAZING!! would highly recommend. 4 stars because no where in the information sent with the tool does it say it needs oil prior to use.
Scritto da: MacGuyver
Sturdy pneumatic sanding tool.
The tool is well built. Requires a larger compressed air tank to provide continuous use. I used a small dual tank compressor however it proved too small requiring me to equently stop sanding frequently to allow the pressure to build. It was no fault of the tool. Great for blending and smoothing dips in the surface.
Scritto da: hutchyAmazon Customer
Ingersoll Rand 317G edge series high speed air sander silver
I've used this model for years and found them both dependable and easy to use. The reason I needed an air tool is because I carve stone and electric tool burn out so quickly because of the dust. This tool is of solid construction and being an air tool, it virtually keeps itself clean of debris in the air. It's comfortable to work with and continues to be dependable. Great tool.
Scritto da: Toolmanazon
No oscillation, only forward backward action
I have an older version of this tool that got dropped and bent that oscillates. This one does not. That said it does work pretty well for cutting down larger surfaces. It’s ok just not great. The price is good though so it’s still recommended
Scritto da: Michael H.
You can buy different bases
This sander is meant to be used with non adhesive sandpaper. If you want a base for PSA adhesive, search Amazon for 3M 05448. This is a replacement base for use with 3M Stikit papers. For Hookit (velcro) papers, search Amazon for 3M 05748.

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array