Inter-Fab DB-TB-M vervangend residentieel zwembad met twee bouten, montageset voor witte duikplank

Name: Inter-Fab DB-TB-M vervangend residentieel zwembad met twee bouten, montageset voor witte duikplank
Brand: Inter-Fab
SKU: 0649359023607
Price: 92.26 EUR
Availability: InStock

Brand:Inter-Fab

3.7/5

€
92.26

Deze Inter-Fab board-to-base hardware kit is geweldig voor het vervangen van oude en roestige residentiële duikplankbouten. Voor witte duikplanken, deze set bevat hoogwaardige roestvrijstalen bouten voor planken met 2 gaten. Het bevat alle benodigde moeren, bouten, bijbehorende ringen, HARDWARE & antivastlooppakket. Gebruik de anti-seize op de schroefdraad van de bouten bij het installeren om vastlopen te voorkomen. Schop je oude bouten op de stoep en geef je duikplank een frisse look met deze Inter-Fab board to base hardware kit voor duikplank.

Geen eenheden beschikbaar

EAN: 0649359023607

Categorieën Patio, Lawn & Garden, Pools, Hot Tubs & Supplies, Onderdelen & Accessoires, Pool & Spa Replacement Parts,

Gemaakt in de Verenigde Staten. Witte dop en ring. Hoogwaardige en duurzame roestvrijstalen bouten en hardware. Ontworpen voor gebruik met de meeste residentiële duikplanken met twee gaten.

Country of Origin	USA
Customer Reviews	4.7 4.7 out of 5 stars 541 ratings 4.7 out of 5 stars
Item model number	DB-TB-M
Item Weight	15.5 ounces
Manufacturer	Inter-Fab, Inc.
Product Dimensions	6 x 3 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Bob Bohl

Missing Part

Unfortunately I didn’t really look closely when I first received the package at the product. I went to use it today and one of the two black washers were missing. Unfortunately , I can’t do a positive review of the product, due to a piece of the product that wasn’t delivered. Too bad that I’m out of the return date.

Scritto da: Faja4x

Worked for me!

Happy with the product. Tip, do not overtighten...there is mostly likely a recommendation of using a torque wrench if you google it. I have a vague memory of 30lbs in a video...I will be buying a torque wrench as a result as I did overtighten. Caused the cap to not go on properly. Maintain a sharp on on the surface of the board to make sure it remains flat. Cheers.

Scritto da: Joseph Coderre

Great replacement for 30 year old bolts

Last season, one of the bolts on the board my folks had installed with their pool 30 years ago finally let go. Just recently I ordered these bolts, and found that the other bolt was about to let go also, very corroded and was less than 1/4 inch left in thickness. I was able to clean out the board and base, and these bolts slid right in. The board is usable again! These were the correct length for the board and base, and had no missing parts. Used the anti-seize generously just to use it all up.

Scritto da: Candi2400

Perfect fit!

Fits great - good length for our diving board. Easy to put in place with good directions. The caps fit nicely and look so much better than the rusty ones we had, plus we had lost a cap. I'm glad I found this kit!

Scritto da: Amazon Customer

Diving board fixed

Original bolts had rusted out. Fit perfectly, but lacked a spacer. Used the old spacer. Can once again use diving board. Wish parts weren't so expensive but needed and Home Depot did not have.

Scritto da: BillC

Very easy to install

My plastic caps had deteriorated and one bolt was rusted. The hardest part of the install was getting the old rusted bolts off. I used WD40 on the bolts by the nuts. I chiseled off the old plastic caps so I could grip the top of the bolt. A 3/4 inch deep socket wrench and off they came. My washers had deteriorated and they needed to be scraped off. The directions and parts list was in the bag. From that point on everything was very simple. Whole job took about an hour. If you need to replace your bolts on your diving board this is the way to go.

Scritto da: Gerry Wagner

Cannot replace Bolt Covers and Missing one Washer

When I got original kit it was missing a washer. The instruction was to return kit which I was going to do when new one came in. It was missing a black washer also. Hope this does not cause problems when I return Kit now missing both black washers.

Scritto da: OK Mom

Saved a TON of money!

We had a very rusty bolt on the diving board at my mom's house. To the point where it was unsafe... This kit was AWESOME. A local pool retail store wanted a TON of money to come out and replace the hardware. So I figured what the heck - I can do this - not much to lose. The hardest part of installing it was getting the old rusted out bolt off of the diving board. We had to put a lot of muscle into getting it out since it was so corroded. Nothing a hammer couldn't solve. Once the bolt was removed we just used the new hardware kit. Everything that I needed was in the bag (except super detailed instructions on the order of the washers). But I figured it out pretty easily by looking at the diving base installation instructions on Inter-Fab's website. HINT: the black washer goes underneath the white cap on TOP of the board. The red thick washer goes in between the diving board and the diving base. The steel washer and lock washer goes "underneath" the base. I did use a little dab of the gray anti-seize on the thread of the bolts. The white cap finishes the look and so does the white rubber caps to cover up the nut. It took about 30 minutes to do the entire thing (it would have been less except for the hassle of getting the old bolt off).