JET kant-en-klaar schuurpapier, korrel 180 (60-9180)

Name: JET kant-en-klaar schuurpapier, korrel 180 (60-9180)
Brand: Jet
SKU: 0696738209374
Price: 218.60 EUR
Availability: InStock

Brand:Jet

3.3/5

€
218.60

PRODUCTBESCHRIJVING Voorgemarkeerd om te snijden. Geen splitsingen, naden of breuken. Sla een voorraad in van dit OEM-goedgekeurde schuurpapier, gegarandeerd voor de beste resultaten. VAN DE FABRIKANT Elke Ready-To-Cut(tm) bevat een rol schurend materiaal die vooraf is gemarkeerd en kleurgecodeerd. Elke Ready-To-Cut(tm) werkt met elke Performax-schuurmachine - zoek gewoon de kleur die overeenkomt met uw trommelmaat en snij langs de lijn. U bespaart tijd en geld met de Ready-To-Cut(tm), omdat deze gegarandeerd geen breuken, geen splitsingen en geen naden heeft, maar altijd perfect passende strips! Levert 19 wikkels op een trommel van 16 inch; 12 op een 25 inch; 14 op een 22 inch en 8 wraps op een 37 inch trommel.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0696738209374

Categorieën Power & Hand Tools, Krachtgereedschap Onderdelen & Accessoires, Power Finishing Tool Parts & Accessories, Power Sander Parts & Accessories, Schuurvellen,

JET Red Assurance-garantie: ondersteund door JET's toonaangevende garantie van 90 dagen. Kwaliteitsproductie: met trots gemaakt in de VS. Vooraf gemarkeerd voor snijden: levert 19 wikkels op een trommel van 16 inch; 12 op een 25-inch; 14 op een 22-inch; en 8 op een 37-inch. Fijn schuurmiddel: 180-grit aluminiumoxide wrap. Compatibiliteit: Ontworpen voor JET en Performax trommelschuurmachines.

Backing Type	Cloth
Backing Type	‎Cloth
Batteries Required?	‎No
Brand	Jet
Brand	‎Jet
Color	Red
Color	‎Red
Compatible Devices	‎Drum Sander
Compatible Material	‎Wood
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 5 ratings 4.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Grit Material	‎Ceramic Alumina
Grit Number	‎180
Grit Type	Fine
Grit Type	‎Fine
Included Components	‎Ready-To-Cut Sandpaper
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎60-9180
Item Package Quantity	‎1
Item Weight	‎4.19 pounds
Manufacturer	‎Performax
Material	‎Aluminum Oxide
Part Number	‎60-9180
Product Dimensions	12"L x 12"W
Product Dimensions	‎11.6 x 12.2 x 4.2 inches
Product Dimensions	‎12"L x 12"W
Unit Count	‎1.0 Count
Warranty Description	‎90 Day

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Rojo

It works

It is sanding paper, it works, markings are accurate

Scritto da: J. Mikkelson

Effective, but burns on some woods

I couldn't believe that there were still no reviews on this item, which I have been using in my one-man shop for several years now on a Performax 16-32. Overall, it's a great option. Cutting is straightforward, using the color-coded lines for your particular drum, though I think there is a dark green line that can be easy to mistake for the black one, which is "my" line. The main problem I have with this is its tendency to develop "hot spots" -- especially on woods such as cherry, with its pitch pockets -- and then proceed to leave a burn line the length of the board as the burn problem snowballs. Once the paper burns, that's it for that spot. You can scrape/chip the burned resin off the drum, but I still mark the spot in pencil on my sander so I don't send something across that spot again. Since I do a lot of rail/stile kind of widths, I can get away with that, but if you were going to use it for lots of wide panels, it could be a different problem entirely. The only remedy I have found, and it's not 100%, is to take *extremely* light passes at a fairly high feed rate. In practice, the paper produces a near-finish quality on woods like mahogany and oak, which can hide finish imperfections fairly well. On maple, walnut, and cherry, particularly dense areas around knots, etc., it leaves very visible straight line scratches that take a good bit of RO sanding at 150-180-220, or a good cabinet scraper, to remove. (If you use a scraper after using this, I would hit the surface with RO at 180 or 220 briefly, and blow or vacuum off the dust, or the residual abrasives from this paper will dull the burr on your scraper in a hurry!) I still think this is a better solution than going to the RO sander straight from the planer, but it can be a board-to-board thing. A side benefit of this kind of abrasive is that, once I need to pull the old one off my sander, it is easy to tear the less worn sections into hand-held size pieces (I usually go about 5" long, and the roll is about 3.5" wide) and use for hand sanding, especially profiles, where the stiffness of the resin/fabric backing is a plus. You can generate some serious heat in a hurry this way, though, so go easy, or wrap your thumb / fingers -- it really is that hot. Overall, a good bet, and it will last you a long time. I'm just finishing my first roll after several years and many, many hundreds of BF through it.