Phanteks PH-DRGB_SKT Digitale RGB LED Starter Kit Bevat de Controller Hub en DRGB LED Combo Kit Retail

Brand:Phanteks

3.5/5

73.02

De Digital RGB Starter Kit wordt geleverd met een Digital RGB LED-adapter waarmee de Digital RGB-strips alleen kunnen werken met moederborden met een Digital RGB Pin-header (+5V, DATA, NA, GND). Phanteks Digital RGB LED-strip gemaakt van flexibel PCB-materiaal en wordt geleverd met een siliconen behuizing die duurzamer is in vergelijking met andere die Epoxy-strips gebruiken. Het kan eenvoudig op het metalen chassis worden geïnstalleerd. Met onze 1-oriëntatieconnector kunt u er zeker van zijn dat de connectoren in de juiste positie zitten. De Digital RGB-strip is ook koppelbaar, zodat u de lengte kunt vergroten door meer lichtstrips toe te voegen. Eenvoudige bediening met een 3-knops afstandsbediening en installatie zonder extra software. Optie om te synchroniseren met een Digital RGB-compatibele MB en bediening via de software van het moederbord. Phanteks Digital RGB LED-strips zijn extreem helder en een geweldige aanvulling op elke behuizing. De LED's zijn digitaal adresseerbaar zodat u individuele LED's op de strip kunt bedienen met ondersteunde software.

Geen eenheden beschikbaar
De Digital RGB Starter Kit wordt geleverd met een Digital RGB LED-adapter waarmee de Digital RGB-strips alleen kunnen werken met moederborden met een Digital RGB Pin-header (+5V, DATA, NA, GND). Phanteks Digital RGB LED-strip gemaakt van flexibel PCB-materiaal en wordt geleverd met een siliconen behuizing die duurzamer is in vergelijking met andere die Epoxy-strips gebruiken. Het kan eenvoudig op het metalen chassis worden geïnstalleerd. Met onze 1-oriëntatieconnector kunt u er zeker van zijn dat de connectoren in de juiste positie zitten. De Digital RGB-strip is ook koppelbaar, zodat u de lengte kunt vergroten door meer lichtstrips toe te voegen. Eenvoudige bediening met een 3-knops afstandsbediening en installatie zonder extra software. Optie om te synchroniseren met een Digital RGB-compatibele MB en bediening via de software van het moederbord. Phanteks Digital RGB LED-strips zijn extreem helder en een geweldige aanvulling op elke behuizing. De LED's zijn digitaal adresseerbaar zodat u individuele LED's op de strip kunt bedienen met ondersteunde software.
Brand Phanteks
Color RGB
Color RGB (Red, Green, Blue)
Controller Type Remote Control
Light Color RGB
Light Source Type LED
Number of Light Sources 30
Power Source Corded Electric
Style Starter Kit
Theme Indoor
Wattage 10 watts

3.5

13 Review
5 Star
68
4 Star
17
3 Star
8
2 Star
4
1 Star
4

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: David The Red
Great Lighting Add-On!!
The media could not be loaded. Duplicate review from Phanteks Halos 120mm Digital LED Fan Frame, Black (PH-FF120DRGBP_BK01) Easy to install and cost effective. I already had the fans that did not come with the case so I didn't have to buy expensive new ARGB fans. Lots of extra wires to hide!! Phanteks Enthoo Pro Case 2 x 140mm front fans (1 included, other is Noctua NF-P14s redux-1500 PWM) 1 x 140mm rear fan (Included) 1 x 140mm bottom fan (Noctua NF-P14s redux-1500 PWM) 1 x Cooler Master MasterLiquid ML360 Mirror ARGB top mounted Installed: Phanteks PH-DRGB_SKT Digital RGB LED Starter Kit 3 x Phanteks Halos 120mm Digital LED Fan Frame, Black (PH-FF120DRGBP_BK01) 3 x Phanteks PH-FF140DRGBP_BK01 140mm Halos Digital RGB Fan Frames (Not purchased here, Amazon only had two in stock at the time) All items purchased at Amazon, except where noted The frames went into the obvious location (not the bottom fan) and one of the light strips included in the starter kit is mounted vertically on the mounting location for the drive cages. Gives me just the effect I was looking for.
Scritto da: Doc
Works and looks great
The media could not be loaded. Wanted something to control the RGB of my case via manual controller, did not want to have anything plugged into MB or deal with any software. This 100% does the job. Magnetics 100% work on my case, no issues, They are not extremely strong, but they do the job and hold the light strips in place. All cables are long and easy to get to the hub. I have a fractal design meshify 2 xl, its a rather large case, I had no issues with cable management or set up. The RGB controller is small, simple, and works well. The cable length is to the point you can have this anywhere you need in or out of the case. The cable is slim and connector is slim. I have it shooting out the back of the case, through one the airflow holes. Mounted on the backside of the case out of sight, via included double sided sticky tape. The lights themselves are bright. I paired the 2 included strips with the Phanteks NEON Digital-RGB LED Strip Combo Set (PH-NELEDKT_CMBO) – 2X 400mm Smooth Lighting Strips. Overall. I wanted to be able to see everything easily on the inside of my case. I wanted good looking RGB strips and to be able to control them without having to use software. Phanteks succeed in everything that I needed.
Scritto da: Michael Sacco
Great strips, useful controller
The led strips blow away corsair strips in brightness and number of LEDs. I used to use corsair strips and have decided to keep these instead. With the higher number of LEDs per strip you get less hot spots and a more consistent color glow throughout the case. The magnets do seem weaker than the corsair strips so I will be using some two sided adhesive, but that's a minimal issue. The controller is a great little device! Magnetic for good case placement, and the optional input remote is handy if not controlling via motherboard header. I was able to Daisy chain two led strips in one connection and six neon strips in another with no issues. Resolves the issue of my Asus header only being able to light up 120 LEDs, extending my RGB capabilities greatly. Who doesn't need moar RGB? :)
Scritto da: David Glenn
Got my phanteks RGB fans going
Got my phanteks RGB fans going now my system will look how i envisioned it. Also the kit arrived a day early which was great.
Scritto da: D. Chung
At lease EIGHT devices on ONE single port!
Just tested the controller with the two LED strips with an addition of six other DRGB Halos on ONE SINGLE PORT, and they all worked beautifully. One issue with the wiring is that the connection for the control buttons to the main box is a bit weak, and all the ports are REALLY tight, so be careful when disconnecting the wires from the hub.
Scritto da: Piquant
Seriously Impressed. Pics cannot capture how nice these look.
Grabbed a bunch of Phanteks DigitalRGB & regular RGB, light strips and fans, and had a blast installing/routing them. So many options to play with. Pictures do not do them justice! Blinking , pulsing, chasing, steady, all with alternating colors and schemes make for a very diverse set of looks. My Favorites are the Neon DigitalRGB though, watching colored light sets chasing each other around the case. Buyers should take note that the DigitalRGB versions are a bit more $, but have programmable actions and "movement" as opposed to the regularRGB ones that are one solid color that can be assigned or changed. Going to copy paste this review on all my purchases from that day.
Scritto da: Kaden
Great starting set
I originally just wanted the LUX Digital Fan Halos, but I called Phanteks and their amazing customer support said I needed this kit to use it. Their customer support was amazing and helpful. This purchase was great, easy to set up. The ONLY complaint I have is the physical controller they include. If you don't have an RGB header you must use the physical controller, and that thing is POORLY made. It breaks apart easy, and inside is just a tiny computer chip with 3 buttons. It feels flimsy and doesn't match the rest of the great build quality parts. They should have made it ~$15 more overall for this kit and just made a bluetooth receiver and include a wireless remote.
Scritto da: Doug
Bought 2 but 1 came broken, and weak magnets
This product needed to quality control better. I bought two and one of them arrived with a bad controller. I switched things around to check that the strips themselves were good. I returned the broken one. The strips themselves are problematic. The ends need to be a lot longer to allow for certain tighter placements such as needing to route thru case holes or thru motherboard tray cutouts. I've decided to cut the wires myself and solder extensions myself. Oh and it only comes with ONE 3-pin extension cable even tho it takes up to 3 strips in parallel (more if you daisy-chain in serial). It really ought to have come with 2 extensions or even 3. Magnets are not really strong enough to mount strips to the underside of surfaces either. The only positive things I can say... Strips are water-resistant and the magnetic, and it was easy to install, but the lack of extensions SEVERLY limited the placement options. Still, I really wouldn't recommended this product to anyone. There are much cheaper alternatives out there.
Scritto da: Wayne
Poor value for money
The whole A/D-RGB non standardisation is a mess. Phanteks LEDs but you need a second cable (supplied) to connect with the hub in this kit (phanteks propriatey pins to standard pins) As far as hubs go it's fairly pathetic - whilst each port on the hub can support up to 4 (linked) LED (devices) the hub itself can only support a maximum of 7 devices - as per the card inside the box. This listing doesn't tell you how many devices it supports and Phanteks own website states it supports 9 devices. The hub only has an output of 7 Amps and their Halo Lux fan shrouds use 1 Amp each - which . I suspect hub predated the (higher Ampage) Halo Shrouds and rather than update their website they hid the number of devices supported within the card within the packaging. Overall seems like a good way to damage their own devices. The hub is sata powered why have the product designed to such low Ampage???
Scritto da: Piotr Sroka
Good kit for a reasonable price
Product met my expectations and transformed my PC into a lively looking machine. There are better kits out there, but for double or triple price of this one. Quite easy to fix and simple to run. I would recommend it to anybody honestly, really happy with the purchase. Only one thing they could think of are longer cables, but apart from that, no complaints.
Scritto da: bishy
Easy to setup
Great item works well
Scritto da: Kristoph
RGB Hub works as advertised, a little pricey though
I bought this hub to allow my Phanteks SK140 DRGB fans to work with my MSI motherboard which uses the standard 4-pin RGB headers. The hub itself feels well built, I really like the magnetic base that allows me to stick it to the back-panel of my P300A case. Once you figure out where you need to connect the hub to the motherboard, it's pretty much plug and play. My only gripe is that the DRGB splitter wires feel fragile which is disappointing for a product that is upwards of 50 CAD. PROS: - Easy to set-up - Hub is well-built - Magnetic Hub CONS: - A bit pricey - DRGB splitter wires are thin and fragile Overall, I would recommend this product if you have already purchases Phanteks DRGB fans like the SK120 or SK140 RGB fans.
Scritto da: Zach Di Stefano
Great value for mobo w/o ARGB headers
Looks great and setup is easy enough. All you need is a spare sata power and you can set these up in your rig. The magnets are a little weak but once you find a position that doesn't put much stress on them they stay up nicely. I chose to hide the controller in the back panel, but you could easily route it to the outside. The hub is magnetic, the controller is not. Update: Still going strong but the controller is built cheaply and fell apart. I had to snap it back together and will most likely have to glue it. Also keep in mind the strips CAN be cut to length between LEDs, making routing a lot easier.

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array