Pitsco Basic Mousetrap Vehicle Kit (individueel pakket) voor 1 student

Brand:Pitsco

3.2/5

60.43

De Pitsco Balsa Wood Basic Mousetrap Vehicle-kit biedt studenten in de klassen 6-12 een praktische activiteit om een ​​modelauto te ontwerpen en te bouwen die wetenschappelijke concepten demonstreert, waaronder snelheid, kracht, beweging en de natuurwetten van Newton, en het leert technisch ontwerp. Leerlingen kunnen de auto uit de set bouwen en de auto aanpassen voor betere prestaties en hogere snelheid. De kit bevat een muizenval, 12- en 18-inch lange stukken balsahout, compact discs van standaardformaat voor wielen, wielafstandhouders, drukringen, 12-inch koperen buisstukken, ultradunne snaar en instructies. Pitsco-kits 57034 (pakket van 10 kits) en 57035 (pakket van 30 kits) bevatten ook een exemplaar van het handboek, Doc Fizzix's Mousetrap Powered Cars and Boats. Het voltooide voertuig meet ongeveer 4,5 x 5 x 26,5 inch (H x B x D). (H is de hoogte, de verticale afstand van het laagste tot het hoogste punt; W is de breedte, de horizontale afstand van links naar rechts; D is de diepte, de horizontale afstand van voor naar achter.) Een muizenvalvoertuigset wordt meestal gebruikt in een educatieve omgeving om techniek en natuurkunde te demonstreren. Voor de bouw zijn witte lijm, een liniaal, een hobbymes, een draadknipper en een boormachine of Dremel-gereedschap (allemaal apart verkrijgbaar) nodig. Producten voor natuurwetenschappelijk onderwijs integreren toegepaste wiskundige en wetenschappelijke principes in projecten in de klas. Leraren in pre-K, basis- en secundaire klaslokalen gebruiken wetenschappelijke onderwijskits en -producten naast het STEM-curriculum (wetenschap, technologie, techniek en wiskunde) om STEM-concepten en real-world toepassingen te demonstreren door middel van praktische activiteiten. Wetenschapseducatieprojecten omvatten een breed scala aan activiteiten, zoals praktische experimenten op het gebied van techniek, luchtvaart, robotica, energie, scheikunde, natuurkunde, biologie en geologie. Pitsco Education ontwikkelt K-12-curriculum voor wetenschap, technologie, techniek en wiskunde (STEM) , educatieve kits en hulpmiddelen voor in de klas. Het bedrijf, opgericht in 1971, heeft zijn hoofdkantoor in Pittsburg, KS. Wat zit er in de doos? * Pitsco balsahout Basic Mousetrap Vehicle Kit * Muizenvallen (één per auto) * Balsahout stukken (3 per auto) * Compact discs (4 per auto) * Wielafstandhouders (4 per auto) * Sluitringen (4 per auto) * Messing buizen (2 lengtes per auto) * Ultradunne draad (1 lengte per auto) * Een handboek, Doc Fizzix's Mousetrap Powered Cars and Boats (alleen 10 stuks en 30 stuks) * Instructies Opmerking: de afgebeelde wielen zijn niet typisch, maar zijn een voorbeeld van hoe leerlingen hun voertuigen kunnen beschilderen en decoreren.

Geen eenheden beschikbaar
Het voltooide voertuig meet ongeveer 4,5 x 5 x 26,5 inch (H x B x D). Versterkt technologie, engineering en wiskundige concepten terwijl studenten auto's aanpassen op basis van factoren die van invloed zijn op de prestaties. Stelt leerlingen bloot aan het ontwerpproces en moedigt hen aan om te experimenteren en het voertuig aan te passen voor grotere snelheid of afstand. Bevat onderdelen die nodig zijn om een ​​voertuig te bouwen dat wordt voortbewogen door een muizenval om les te geven in technisch ontwerpen. De houten muizenval-voertuigset biedt leerlingen in de klassen 6-12 een praktische activiteit om een ​​modelauto te ontwerpen, bouwen en aanpassen die de wetenschappelijke concepten van snelheid, kracht, beweging en de natuurwetten van Newton demonstreert.
Age Range (Description) 12+
Brand Pitsco
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 202 ratings 4.1 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 17.9 x 4.6 x 0.4 inches
Item model number BG57033
Item Weight 0.4 Pounds
Item Weight 6.4 ounces
Manufacturer Pitsco
Product Dimensions 17.9 x 4.6 x 0.4 inches
Size For 1 Student

3.2

8 Review
5 Star
59
4 Star
14
3 Star
15
2 Star
4
1 Star
9

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Britt
Not the wheels in the image
Clear, flimsy wheels came in this kit. I specifically bought this because I thought the wheels were stronger and looked cool. I was extremely disappointed. The kit is way overpriced for what's with it. The car came together ok with some upgraded wheels.
Scritto da: Jonathon D Leszczynski
This kit works, but you can make it much better with some intelligent improvements.
The directions are great and this is a perfect kit to MODIFY for a racer. Skip using the board you see below the mousetrap as one big board. Instead, glue the mousetrap straight to the two side boards (so the car is as wide as the mousetrap) after you cut off a couple more, mousetrap width pieces, from the big board. Use those additional pieces to stiffen up the frame. Use a pipe cutter to trim the axles and get some nylon washers from the hardware store to fit the axles (I used #10 sized.) The nylon washers help you keep the axles straight. If you really have time, you can drill out a bunch of holes to save weight. I also had some wider CD sized wheels that came from the packaging of 100 packs of DVD's, and those wheels easily accepted a wider rubber band to help provide traction to the drive tires. Also, consider a single front wheel over two, if you can manipulate it.
Scritto da: Mellisa Boan
Science Olympiad parent approved
Bought this for Science Olympiad from seeing other parents using this the year prior. Our child signed up for Mousetrap Vehicle AGAIN! We were not thrilled. Year prior we spent countless hours, days, weeks making the perfect mousetrap vehicle. We built around 3 and our kid’s friends parents build 4 or 5. You could imagine the stress this brought to our family. Well when our kids came home and was so happy about signing up for this endeavor again, we were shocked she didn’t remember the pain and anguish from the last year. I quickly bought this and it was PAINLESS and RELAXING. This is easy and fun, the way it should have been the first time. Instructions are kid friendly. Our 10 years did most of the work. Super convenient!
Scritto da: Jerry Stowers
Fun kit to build!
My daughter had this as a school project so we built it and it worked great, it was a science project about force! She painted it too, great fun!
Scritto da: shoppers voice
It worked. Price is a little high for what it is.
I ordered this on two day shipping, and it came on time for a school project. It was missing one of the plastic CDs, so I just used a junk one that I have. The brand for this product is wrong, this is actually a mousetrap car from DocFizzix.com from years ago, I'd assume that they are just re-branding them and selling off left over stock. As for the quality, its okay. The CDs are flimsy and I recommend using real disks for ease of build. Also I found out that it's actually cheaper to buy this off of their store, for like 15 dollars. After I finally managed to throw it together, it performed okay. This thing works best when you have it on longer and flatter surfaces, unlike my test trials (ie. a shorter hallway and on carpet). So, with all of this considered, I give this a 3/5. Is it worth 20 dollars? No, more like 15, or even 10. I also included some images of the build and the package it came in, some of the images may be poor quality so I apologize.
Scritto da: Mark M.
Good enough for 3rd place out of 25.
My daughter ended up with an 87’ run using this kit for a physics class project. Much simpler than trying to do it from scratch. The resulting car is great for a school project. By design it’s not made to be crashed into a fleet of toy trucks by an 8 year old. It did its job at our home and is destined for the trash can during a cleaning project a year from now ;).
Scritto da: Peter M.
A very worthwhile purchase for the curious minded.
The kit was very well made, and I loved the fact that the holes were predrilled. The instructions would be more helpful if it were a little more in dept, as the last steps were very confusing for me. If you by any chance use this kit for Science Olympiad, then you might face problems with the vehicle not fitting into the even parameters, but this issue could be easily fixed with some modifications. All in all, this was an excellent mousetrap vehicle.
Scritto da: James W Thomas
Sucks.
Wheels don’t stay on. Mousetrap spring broke off. Frame has no support. What a disappointment!

Gerelateerde producten

hot
Leermiddelen Hersenmodel 3,75 inch
3.4/5

€ 66.72

Leermiddelen Hersenmodel 3,75 inch
3.4/5

€ 66.72

hot
Oom Milton Moon In My Room®
3.7/5

€ 66.38

Oom Milton Moon In My Room®
3.7/5

€ 66.38

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array