POWERTEC 148031 6-inch HSS-verbindingsmessen voor Delta 37-205 37-220 37-275X, set van 3

Name: POWERTEC 148031 6-inch HSS-verbindingsmessen voor Delta 37-205 37-220 37-275X, set van 3
Brand: POWERTEC
SKU: 5093791111784
Price: 39.52 EUR
Availability: InStock

Brand:POWERTEC

3.5/5

€
39.52

PRODUCTBESCHRIJVING POWERTEC USA High Speed Steel (HSS) Messen zijn meer dan de simpele schaafmessen. Het fabricageproces begon met eersteklas Europees HSS-materiaal, gevolgd door strikt professionele bewerking en kwaliteitscontrole die zorgen voor extreme scherpte, precisie, balans en nauwe tolerantie in elk stuk POWERTEC HSS Knife-product. De laatste warmtebehandeling verbetert de hardheid en duurzaamheid. Het doel van POWERTEC is om de snijprestaties te maximaliseren die elke schaafmachine mogelijk kan bereiken. Met de beste kwaliteit snijden POWERTEC Jointer Blades het hout efficiënt en consistent en laten een glad en vlak oppervlak achter op de houtbewerkingswerkstukken, ongeacht of het zachthout of hardhout is. Het maakt niet uit of u op zoek bent naar de ware vlakheid of productie-efficiëntie, POWERTEC HSS-bladen staan altijd tot uw dienst. Het schaafblad van de POWERTEC-frees is gemaakt van het premium M2 High-Speed Steel geïmporteerd uit Europa. De exclusieve sabotage- en warmtebehandelingen van POWERTEC USA stellen de messen in staat om de scherpte van de snijkant te behouden gedurende langdurig gebruik en talloze sneden. Ons vervelende hoonwerk zorgt ervoor dat de snijkant ultrascherp en recht is. De consistente snijprestaties van industriële kwaliteit laten alleen het beste schaafresultaat achter op het oppervlak van de kolf. POWERTEC-freesbladen ondersteunen u bij uw streven naar echte vlakheid en productiviteit. VAN DE FABRIKANT POWERTEC High Speed Steel (HSS) messen zijn gemaakt van premium High Speed Steel (HSS) met prestaties die OEM-producten evenaren of overtreffen. Het fabricageproces begon met eersteklas HSS-materiaal, gevolgd door strikt professionele bewerking en kwaliteitscontrole die extreme scherpte, precisie, balancering en nauwe tolerantie in elk stuk van het POWERTEC HSS-mesproduct garanderen. De laatste warmtebehandeling verbetert de hardheid en duurzaamheid. POWERTEC High Speed Steel (HSS) messen blijven scherp en gaan langer mee dan conventionele producten. We garanderen dat POWERTEC High Speed Steel (HSS) messen voldoen aan de OEM-kwaliteit en industriële standaard of deze overtreffen.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 5093791111784

Categorieën Tools & Home Improvement, Power & Hand Tools, Krachtgereedschap Onderdelen & Accessoires, Saw Blades, Onderdelen & Accessoires, Blades, Jointermessen,

Bladafmeting: 6-inch x 5/8-inch x 3/32-inch. Een set van drie; plastic koffer verpakking. Enkele rand. Gemaakt van High Speed Steel voor een langere levensduur. Vervangende messen voor Delta 6-Inch jointer 37-190, 37-195, 37-205, 37-220, 37-275X, 37-658.

Batteries Included?	‎No
Batteries Required?	‎No
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 256 ratings 4.4 out of 5 stars
Included Components	‎Jointer Knives
Is Discontinued By Manufacturer	‎No
Item model number	‎148031
Item Package Quantity	‎1
Item Weight	‎5.6 ounces
Manufacturer	‎POWERTEC
Material	‎High Speed Steel
Number Of Pieces	‎3
Part Number	‎148031
Product Dimensions	‎9.3 x 0.8 x 0.29 inches
Size	‎6-Inch

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Rene Chabannes

Blades are very sharp and straight

These blades have a secondary angle ground on the edge. I didn't check the angles. The edges are very straight. They are for my son, so I don't know how well they will hold up.

Scritto da: Jacob Haley

Grizzly G1017 6" Jointer

Works great on my Grizzly G1017 6" jointer. Can't beat these blades for the money.

Scritto da: R. McArthur

Fit Powermatic Model 50

Blades were the exact dimensions in the description and were a good fit for my Powermatic Model 50 Jointer. - Checked against a known good straight edge and the blades were dead on. - Blades were razor sharp I don’t know how long these will retain their edge compared to other options but for the price they will work nicely until I can afford a helical cutter head.

Scritto da: Ordinary Average Guy

Good knives for a great price

I purchased these for my Delta 37-205/207 6" jointer. As expected I had to raise the outfeed table to accommodate the height of the new blades and zero out the outfeed table, the old knives had been sharpened multiple times and were of course shorter than the new blades as a result. After getting everything set, I ran a couple of pieces of walnut and white oak through it, never cut better.

Scritto da: mathew slater

Jointer

Fit perfect and sharp blades thanks!

Scritto da: Anuj Prateek

Larger but fits Rockwell/Delta 37-220

Recently bought an used Rockwell/Delta 37-220 jointer. Jointer came with original 40 year old knives. Bought these to replace the original knives. These knives are taller and thicker than the original knives but fit well. Note that the height difference could be due to sharpening of old knives. Face and edge jointed a test board. Cuts were smooth and board came out true. Don't know how long these will last bit don't care if they are cheap.

Scritto da: Jordan tilot

Decent blades, questionable material.

The blades are as advertised. My only concern is the steel used(or the temper) as they sent rather brittle. Chipped all 3 of them on some red oak I ran over them. Not bad chips or anything, the marks being left are easily sanded out, but concerning they got nicks so soon, and after very little use.

Scritto da: alas

Worked great on my old delta jointer

I used these in an old (1970-80s) Delta 6" jointer that I restored. They were a little longer than the originals but they work great. I haven't really tried out the rabbeting groove on my jointer; I haven't played with aligning the blade with that groove, but I would think it would work fine. The screws that hold the blades in the cutterhead lie in a narrow channel. I used an angle grinder flatten my baby wrench to fit. I used a cheapo dial indicator to align the blades, so that the height of all parts of the three blades were equidistant from the table height.

Scritto da: Paul Renaud

Good price, but the knives aren't very sharp

The price is right and they certainly fit, but they are not very sharp at all. I had to hone the edge new out of the box. I tried the hair shave test, and could actually apply huge amounts of pressure to the skin without even the hopes of removing a hair (although it did help scratch an itch). That is WAY too dull for a brand new edge. I would never let my hand plane or chisel blades get like that, and my planer blades were deadly sharp out of the box. I will send the 4 other blades to be sharpened. I will likely buy better blades in the future, as the cost of sharpening negates the price of the knives.

Scritto da: Mark & Consolacion Edwards

Cheap blades

Very poor blades, now I know why they are cheap. Was planning store bought pine boards and after a few passes one of the blades started to show nicks, not impressed with the blades, very cheap.

Scritto da: Merrit A.

Good Blades

I have an older Beaver planner and had a little trouble finding blades. I took a chance on these and they work perfectly.

Scritto da: David Shuffler

Horrible quality steel.

First cuts were good, but ran a small piece of curly maple through the plainer, and the hardness of the wood put small grooves in the blades.

Scritto da: MJM Creations

Value for money spent

The quality meets the needs for a hobby shop. Then you add in cost for the product,it's a no brainer. Value for cost is great.