Prime-Line 9055420 zeskantige schroeven, 1/4 inch x 6 inch, A307 klasse A verzinkt staal, (50 stuks) 1/4 inch -20

Name: Prime-Line 9055420 zeskantige schroeven, 1/4 inch x 6 inch, A307 klasse A verzinkt staal, (50 stuks) 1/4 inch -20
Brand: PRIME-LINE
SKU: 0049793105127
Price: 62.22 EUR
Availability: InStock

Brand:PRIME-LINE

3/5

€
62.22

Draadtype: Diep, Puntstijl: Gimlet. Vereist een geleidegat dat moet worden geboord en geïnstalleerd met behulp van een sleutel of dopsleutel. Wordt gebruikt in toepassingen waar standaard houtschroeven de belasting niet kunnen dragen (dekconstructie, enz.). Voorzien van diepe houtschroefdraden en accepteert geen moer. Zware houtschroef met 6-zijdige zeskantige boutkop. Maat: 1/4 inch x 6 inch.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0049793105127

Categorieën Industrieel & Wetenschappelijk, Nagels, Schroeven & Bevestigingsmiddelen, Screws, Decking Screws,

Drive System	External Hex
Exterior Finish	Zinc
Head Style	Hex
Item Dimensions LxWxH	6 x 4 x 6 inches
Material	Steel

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Gordon T. Hamachi

Good if you are Careful

Good price for long lag screws. If you are not careful in drilling the right sized pilot hole and lubricating the bolt (I use bar soap), the lag screws may break when tightening them.

Scritto da: Uncle Jimmy

They Break easily.

Had to buy a longer drill bit to use. I would drill in about 8 inches expecting the screw to seat in the last 4 inches. I was unable to achieve that and had to drill the entire length to keep the bolts from snapping.

Scritto da: tooold

great

perfect for my geo dome

Scritto da: Cmacinsa

Very good product

Excellent product, just need to have an option for washers

Scritto da: Bob Westbrook

First three sheared off

The first three I used sheared off when screwing into hardwood (beech). So I'd say that's not acceptable metal. Worked OK if I predrilled the wood.

Scritto da: Primer1

Great product

Just what I needed for my project. Highly recommended.

Scritto da: ATXexas

Cheap, fragile

These are really long lag screws, however if you try to drive them into anything (I was driving them into live Juniper which is very soft wood) they will shear off. You have to pre-drill the entire length of the hole or you'll end up with the head of the screw in your bit driver... If you have a nice long bit and want to take the time to pre-drill they are probably OK but you'll still want to use 2 b/c I wouldn't trust them to hold. If you don't want to pre-drill, get a decent screw from somewhere else. These are pretty bad.

Scritto da: Ted Matthews

Good price. Big quantity you can’t find in one hardware store.

Bolting planks on a 60 ft walking bridge,