Prime-Line GD 12321 torsieveer voor garagedeur, .250 inch x 2 inch x 28 inch, goud, rechtsdraaiend, zwart 28 inch zwart

Brand:PRIME-LINE

3.6/5

130.94

Rechter veren zijn aan de linkerkant van het midden gemonteerd en linker veren zijn aan de rechterkant van het midden gemonteerd (in de garage naar buiten kijkend). De lente omvat stationaire en kronkelende kegels. Vervanging vereist gebruik/aankoop van art.nr. GD-52238 en een duidelijk begrip van de draadmaat en het gebruik ervan. Wanneer het gaat om dubbele veerinstallaties, is het belangrijk om tijdens dezelfde klus zowel de LINKER- als de RECHTER-WINDVEER correct te installeren. 0,250 inch draadmaat x 2 inch binnenafmeting x 28 inch lengte met gouden kleurcode. Deze rechtsdraaiende torsieveer wordt gebruikt voor het vervangen van kapotte garagedeurveren. 2 inch binnendiameter. Rechtse windveren zijn links van het midden gemonteerd (gezien vanuit de garage naar buiten kijkend). Veer omvat stationaire en opwindkegels, vervanging vereist gebruik/aankoop van Prime-Line onderdeel GD-52238 en een duidelijk begrip van de draadmaat en hantering. Bij dubbele veerinstallaties is het belangrijk om tijdens dezelfde klus zowel de linker als de rechter windveer correct te installeren. 0,250 inch draadmaat x 2 inch binnenafmeting x 28 inch lengte met gouden kleurcode. Gebruikt door verschillende fabrikanten van garagedeuren.

Rechter veren zijn aan de linkerkant van het midden gemonteerd en linker veren zijn aan de rechterkant van het midden gemonteerd (in de garage naar buiten kijkend). De lente omvat stationaire en kronkelende kegels. Vervanging vereist gebruik/aankoop van art.nr. GD-52238 en een duidelijk begrip van de draadmaat en het gebruik ervan. Wanneer het gaat om dubbele veerinstallaties, is het belangrijk om tijdens dezelfde klus zowel de LINKER- als de RECHTER-WINDVEER correct te installeren. 0,250 inch draadmaat x 2 inch binnenafmeting x 28 inch lengte met gouden kleurcode. Deze rechtsdraaiende torsieveer wordt gebruikt voor het vervangen van kapotte garagedeurveren. 2 inch binnendiameter. Rechtse windveren zijn links van het midden gemonteerd (gezien vanuit de garage naar buiten kijkend). Veer omvat stationaire en opwindkegels, vervanging vereist gebruik/aankoop van Prime-Line onderdeel GD-52238 en een duidelijk begrip van de draadmaat en hantering. Bij dubbele veerinstallaties is het belangrijk om tijdens dezelfde klus zowel de linker als de rechter windveer correct te installeren. 0,250 inch draadmaat x 2 inch binnenafmeting x 28 inch lengte met gouden kleurcode. Gebruikt door verschillende fabrikanten van garagedeuren.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Black
Customer Reviews 4.6 4.6 out of 5 stars 203 ratings 4.6 out of 5 stars
Included Components ‎Torsion spring
Item model number ‎GD 12321
Item Package Quantity ‎1
Item Weight ‎11.66 pounds
Manufacturer ‎Prime-Line Products
Material ‎Steel
Part Number ‎GD 12321
Product Dimensions ‎28 x 2.5 x 2.5 inches
Size ‎28 in.
Warranty Description ‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

3.6

13 Review
5 Star
81
4 Star
10
3 Star
3
2 Star
4
1 Star
3

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Art
Great replacement torsion spring, bad QC on ordered part
The spring I ordered was a right wound spring, but the sent me the left wound counterpart. I say counterpart because my garage door only needs one spring. Because of this, I was able to just install the sent spring on the opposite side. For the product itself, all was well. It was new, packaged well and had decent instructions and labeling. For a 67 dollar spring and a quick you tube tutorial, i saved myself a couple hundred dollars at a minimum.
Scritto da: robert sedlor
Works great
After doing some research and purchasing the correct tools I decided to install myself. Installation was straightforward and it works great.
Scritto da: Don Cattani
It's a deal
I have had a similar trap for over 40 years. It still works but is rusting thru at the base from the rotting mice causing acid. I have caught hundreds of mice in my garages with no bait. Sometimes I will find up to 4 mice in there when I get around checking it. I have a lot of bird feed on hand and that is what attracts them to my garages. In 40 years, I have never had any problems with it.
Scritto da: Cindy Stephens
Perfect replacement part for my garage spring
Perfect replacement part for my garage spring! This is for the replacement of a right wind spring. That is, if you are inside your garage looking at the door, it will be for the left side of the garage (opposite of what you'd think). There is a great installation instruction video on YouTube by DIY garage spring replacement. Be VERY careful putting the needed 29 1/4 turns tension into the spring. I went cheap and bought a 1/2" thick x 36" length steel rod from the big box orange store, which I then cut in half to use as the winding bars. First attempt, I couldn't get past about 18 turns (I'm a pretty strong mid 30's dude), before being scared for my life and thinking there was no way I would get to the required turns. I headed back to the orange store and bought two more 1/2" x 36" length steel rods. This time I did not cut them, but used the extra length for better leverage (gotta love physics). This time I moved slowly each turn, while my wife inserted the next rod while I tightly held my end (with both hands). You can brace the rod facing down against the garage if you need a rest before resuming. I'm baffled with how anyone can do this by themselves, and with any shorter rod then 36". (You have my upmost admiration, if you can). I was knee deep in it before I realized how scary this whole installation was. But hey, I'm a do it yourself kind of guy. Good luck, and take it slow!
Scritto da: maskedgamer
How do you rate a garage door spring?
They last about 10 years and you either install them and they work or they don't. So far this product installed just fine and has been doing it's job. Don't have any other garage door springs to compare it too other than the once it replaced that broke. The spring I received also did not come with the bushing so make sure you purchase one. I recommend upgrading from nylon to steel. I did and it was well worth it.
Scritto da: Amazon Customer
Worked out good.
Good.
Scritto da: Ron Scott
Perfect
Excellent repair for my garage door
Scritto da: victor junior
Great product
Right side (BUT) goes on left side you under the garage motor facing door, it took me 4 times to get it right and 24 turns of tension.
Scritto da: Rich Rootes
Top Notch Spring
One of my garage door springs broke - meaning the door wouldn’t raise or fall. Then the dilemma - who sells these things? Well thankfully Amazon does - make sure you size them correctly using the grid and you’re all sorted Follow the instructions and be careful - be sure to order some adjusters too, otherwise you’ll take an eye out
Scritto da: 5150
Yeah
Good
Scritto da: glenn simpson
Be careful
After returning the right hand spring I ordered the correct left hand spring and installed it by myself. It takes patience and after 3 tries I had it working
Scritto da: Lggrflem
that it works
Works perfect
Scritto da: Daniel Peng
make my garage door work again and very well
Good manual,after installation two months,no problems at all,let my garage door work well again.Thanks.

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array