Protoco 3070 Standaard 15-delige sleutelhouder, gereedschapsorganizer voor gereedschapskist, gereedschapswagen of wandmontage, blauw 15-delig blauw

Name: Protoco 3070 Standaard 15-delige sleutelhouder, gereedschapsorganizer voor gereedschapskist, gereedschapswagen of wandmontage, blauw 15-delig blauw
Brand: Protoco
SKU: 0720012030702
Price: 36.15 EUR
Availability: InStock

Brand:Protoco

3.6/5

€
36.15

Update uw gereedschapskist of gereedschapswagen en houd uw gereedschap georganiseerd met Protoco's Wrench Rack (The Original!), Verkrijgbaar in 12 of 15 stuks, standaard of omgekeerd. Wandopstelling is ook een optie om uw sleutels netjes geordend te houden. Lang geleden zijn de dagen van het zoeken naar een sleutel van een bepaald formaat op de bodem van uw gereedschapskist, of het doorzoeken van lade na lade van opgestapeld puin. Met het Protoco Wrench Rack zijn uw gereedschappen altijd binnen uw gezichtsveld, waardoor het gemakkelijk is om de juiste sleutel voor de klus te vinden, wat de klus ook is. Ons sleutelrek is verkrijgbaar in verschillende kleuren en past zich gemakkelijk aan de sfeer op uw werkplek aan en wordt er naadloos onderdeel van.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0720012030702

Categorieën Tools & Home Improvement, Power & Hand Tools, Gereedschapopbergers, Gereedschapskisten,

Over Protoco: Protoco produceert beschermhoezen, kunststof spuitgegoten producten, gefluïdiseerde poedercoatingproducten, coatings, maritieme producten en op maat gemaakte verpakkingen, allemaal met trots gemaakt in de VS sinds 1977. Veelzijdig: past op zowel SAE- als metrische moersleutels en houdt moersleutels vanaf 1 /4 tot 1 en 6 mm tot 24 mm; Perfect voor je huidige sleutelset en ook voor het opzetten van een nieuwe! Het is ook zo ontworpen dat al uw sleutels passen in een lade van 1 inch hoog in uw gereedschapskist of kar. Zeer duurzaam: gemaakt van kunststof met hoge dichtheid, dat duurzaamheid, slagvastheid en een lange levensduur biedt; Een gereedschapsopberger die jarenlang deel zal uitmaken van uw opstelling, ondersteund door Protoco-kwaliteit en gemaakt in de VS!. Eenvoudig te monteren: dit moersleutelrek kan ook eenvoudig worden geïnstalleerd, en door uw gereedschap aan de muur te hangen, blijven ze binnen uw gezichtsveld, zodat u in één oogopslag de juiste sleutel voor de klus kunt identificeren; Bespaar tijd die verspild zou worden aan het zoeken naar het juiste gereedschap, en krijg uw projecten sneller gedaan! Superieure organisatie: houd uw gereedschapskist georganiseerd en verspil geen tijd aan het zoeken naar de sleutel die u nodig hebt; Onze 12- of 15-delige sleutelhouder houdt ze allemaal georganiseerd en duidelijk in het zicht in plaats van rond te zweven in een la, klaar om te gebruiken wanneer je ze nodig hebt.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Protoco
Brand	‎Protoco
Color	Blue
Color	‎Blue
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 123 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Powder Coated
Finish Type	‎Powder Coated
Head Style	‎Box End
Included Components	‎Wrench Rack
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	11.75 x 7.13 x 1.13 inches
Item Dimensions LxWxH	‎11.75 x 7.13 x 1.13 inches
Item model number	‎3070
Item Package Quantity	1
Item Package Quantity	‎1
Item Weight	‎0.353 ounces
Manufacturer	‎Protoco
Material	Plastic
Material	‎Plastic
Operation Mode	‎Mechanical
Part Number	‎3070_43_1
Product Dimensions	‎11.75 x 7.13 x 1.13 inches
Size	‎15-Piece
Style	‎15-Piece Standard
Warranty Description	‎Parts

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Shopping Guy

Best rack if you don't need to captivate your wrenches to carry them around

This wrench rack is perfect for organizing your tools in your tool box drawer when you don't need to carry all your wrenches around. This rack is the easiest to get wrenches in and out and they sit nicely in the grooves nestled into the two foam strips on the inside of each rail that keeps them in place unless you slam the drawer pretty hard. Compared to the type of rack that captivate the wrenches this also takes up a little less height and area in your drawer. If you want a rack that captivates to tools you can check out a couple of the other reviews I submitted, but for drawer organization and pure good looks - if you typically do your work near your box these are the best.

Scritto da: ED

Good rack, nice quality

These fit my snap-on wrenches well. Sizes 10-24mm. Im not sure how well they would work with the craftsman wrenches that most guys have for home since those are a little bulkier. These hold up well for everyday use in the shop though. I tend to like the gripper style better myself. The wrenches wiggle around in these some. Not a big deal I just like how the gripper style racks hold them tight and allow you to grab the entire rack and carry it around if needed. The quality of these are very good though. And a lot cheaper on amazon than off the matco truck. I give 4.5 stars.

Scritto da: Warren and Christine

Standard

Pretty much the standard in wrench racks. My others I've had for forever now. The foam on this initially had the wrenches sitting high up in the grooves but over time they settle in. I just wish they still had the clip that went over the rack that held them in place in case you needed to take them somewhere. I'm not a fan of the clip in style racks because I don't want to fumble getting a wrench. Time is money and I don't need frustration.

Scritto da: RB211

Perfect For Drawer Use

Perfect if you keep your wrenches in a tool box drawer. The addition of the raised, foam down each side is a nice feature, however I'm sure it will compress over time and not be as effective at keeping each wrench placed.

Scritto da: Wesley Schaefer

Cheap 3d printed

They hold wrenches. But don't breathe on them wrong or else they fall out of their slot. So it if they or in a tool box drawer like mine they will all fall out all over every time you open or close your drawer. Make your own or buy better ones.

Scritto da: JerseyBoy0034

Yes please

These are the best for containing large four way angle wrenches up to 1 1/4” and still having them fit in a drawer. Also work great for double box end offset wrenches.

Scritto da: Chris A.

... this is the only one that is worth a crap. I wish they made version with one straight ...

I've tried several wrench organizers and this is the only one that is worth a crap. I wish they made version with one straight side for a slightly more efficient use of drawer space.

Scritto da: Gary Barrentine

Does a good job.

Fits in tool cart drawer. Keeps ratcheting wrench in place and organized. Does not slip when drawer is closed.

Scritto da: Tim

excellent

Solid low profile wrench rack will let you put a complete set of 15 wrenches into a low profile drawer. These have thick teeth and solid construction so they hold up well. The 15 wrench versions can be hard to find sometimes, so very happy to be able to buy them again. Use along with the reverse style to load up your drawer with little wasted space.

Scritto da: Mark T

The best wrench racks!

Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.

Scritto da: Mark T

Best wrench racks!!

Scritto da: Amazon Customer

Not sure why one picture says magnetic, because it is not.

Looks good, better suited for in a toolbox than hanging on the wall. Not sure why one picture states it is magnetic because it definitely is not. I bought this under the impression that it was magnetic.

Scritto da: Uncle Evil

Original Wrench Racks for a good price. Wish I could buy the reverse version ...

Original Wrench Racks for a good price . Wish I could buy the reverse version as well for the same price .