QualGear CM2-W-100-P kabelbinderbevestiging, wit

Name: QualGear CM2-W-100-P kabelbinderbevestiging, wit
Brand: QualGear
SKU: 0632930945450
Price: 21.67 EUR
Availability: InStock

Brand:QualGear

3.5/5

€
21.67

PRODUCTBESCHRIJVING De Klein Tools Bull-Pin Holder is geschikt voor alle standaard bull-pins. Het is gemaakt van leer en geklonken om het duurzamer te maken. Houder kan worden bevestigd aan riemen tot 2 inch (5,1 cm) breed. Al meer dan 160 jaar produceert Klein Tools eersteklas handgereedschap van professionele kwaliteit dat de prestaties, duurzaamheid en precisie levert die nodig zijn om de klus goed te klaren. Onze familie van ingenieurs, arbeiders en vakmensen blijft zes generaties expertise steken in elk gereedschap dat we maken door alleen materialen van de hoogste kwaliteit, superieur vakmanschap te gebruiken en de productie zo dicht mogelijk bij huis te houden. Klein is niet alleen de naam van ons bedrijf, het is ook onze familienaam. En aangezien we een Amerikaans bedrijf zijn dat eigendom is van een familie en door een familie wordt gerund, weet u dat u op ons kunt rekenen om hier morgen te zijn. Klein Tools maakt niet alleen geweldige producten, we maken geweldige producten die voldoen aan de eisen van de professionals die ze elke dag gebruiken ... Sinds 1857. VAN DE FABRIKANT De Klein 5417 lederen bull-pin houder is geklonken om een lang en duurzaam leven. Het bevat alle standaard bull-pins en alle Klein-bull-pins. Het is gemaakt van leer en heeft de sleufriemverbinding. Het past op riembreedtes tot 2-inch en heeft een totale afmeting van 3-1/4- bij 11-inch. Sinds 1857 is het bedrijf dat wordt gerund door Mathias Klein en zijn nakomelingen tot de vijfde generatie, gegroeid en ontwikkeld samen met de telecommunicatie- en elektrische industrieën waar Klein-tangen voor het eerst grote toepassingen vonden. Tegenwoordig vertegenwoordigt Klein Tools, Inc. veel meer dan Klein-tangen. De productlijn van het bedrijf is uitgebreid en omvat vrijwel elk belangrijk type handgereedschap dat wordt gebruikt in de bouw, de elektronica, de mijnbouw en de algemene industrie, naast de elektrische en telecommunicatiesector. Internationaal zijn de producten van Klein over de hele wereld verkrijgbaar via een gerenommeerd netwerk van agenten en distributeurs die de producten op voorraad hebben die nodig zijn voor hun specifieke markten. Klein's reputatie als toonaangevende producent van producten van professionele kwaliteit is wereldwijd.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0632930945450

Categorieën Electronics, Brake Lights, Snoerbeheer, Kabel Ties,

Totale hoeveelheid 100 st. Breedte bevestigingsgat 4 5 mm. Schroefgat diameter 3 5 mm. Duurzame kunststof constructie. Kabelbinderbasis zadeltype draadhouders.

Brand	QualGear
Color	White
Country of Origin	China
Customer Reviews	4.4 4.4 out of 5 stars 295 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	4 x 4 x 1 inches
Item Length	4 inches
Item model number	CM2-W-100-P
Item Weight	1.76 ounces
Manufacturer	QualGear LLC
Material	Plastic
Number of Pieces	100
Product Dimensions	4 x 4 x 1 inches
Style	Saddle Type White 100 in Poly Bag

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Mary Ann

A little bit small

Should be a little bigger. If you mount with a drywall screw make sure you run it in perfectly straight. If not it is really tight to get zip tie in. I found some #6 screws that made it much easier to get zip ties in. Sill a good value. Note to manufacturer: I would rather pay a little more and have correct size screws be included.

Scritto da: Natasha Croston

Work well

Unlimited uses, come in handy for everything. I use these to mount wire to trailer lights, also used to hold wires on harnesses after the clips broke for marker light .

Scritto da: Tom G

Cable tie excessories - good to have

when buying cable ties, I make sure I have a variety of accessory parts to handle differnt cable support and securing arrangements. They complement the self-adhesive pads and cable ties nicely for wire management.

Scritto da: Sandy Y

These come in handy!!!

I don't know how I went so long without these. I live off of duct tape and zip ties as a single mom of two. these work wonders keeping cables for honestly anything in place. I would make sure it's screwed into a stud secure and solid fit.

Scritto da: NJN

No adhesive tape

Produce works as expected. I'm using 4 inch zipties with these holders to keep wires bundled together. They are small and do not have adhesive back. This isn't a problem as I'm using hot glue to affix them to walls and shelving. Good value for the money.

Scritto da: EJ

Great for hanging lightweight tube

I used these for hanging a pex style air system in my garage. They work great. I used #6 drywall screws to secure them to the wall and they allowed a zip tie to slip through and be tightened down. I'll end up using these for a lot of different things

Scritto da: Amazon Customer

6 STAR PRODUCT (1 star extra for the value)

I was pleasantly surprised how awesome this QualGear CM2-W-100-P Cable Tie Mount is. They were smaller than expected but that is a good thing! They fit standard ties although they seem that they may not. I use a #10 sheet rock screw and it works although it's not quiet flush with the recessed hole. The tie still makes it through. I tried it to hold down coax cable and it is strong bond. I would pay double the price--oops, hush! This is a blow-out bargain price and will have to order a few more bags before the price is raised. One of the best buys on Amazon for cable installers and DIYers.

Scritto da: S.768

Better for cable management than the clips.

Excellent for cable management, even for PC building. These are a lot better than cable clips because you can control the slack on the cables and give your cable runs a cleaner look.

Scritto da: Amazun hater

Needs correct size screws, be aware!

Theyre ok, but you need a certain size countersunk screw otherwise you CANNOT get the zip tie through,

Scritto da: Daiwamaster

Quality mounts !

As an electrician working on boats, I’ve installed close to a 1 000 of these cable mounts in the last 3 years. They are quality, same as the big brand name. These one will take a #6 pan head screw and fit up to a 14” cable tie. I mainly use #6x1/2” screws with a 8” 50lbs strength cable tie. This size of cable mount will look clean up to a single 4awg or multiple smaller gauges. A single 8awg is the smallest you can use before the tie doesn’t snug it down anymore. Also works well for communication cable, will hold a single (RJ45) Ethernet cable snug, but not a flat telephone cable. Works great with split loom as well up to 1/2”. Overall this is a quality product that has been consistent over several years of buying.

Scritto da: LCh

Make sure they fit your ties!

I got these without checking size, found out they don't fit jumbo size cable ties, only the 'normal' sized ones. But product wise, surprisingly great quality, their sides are thick, and does not flex unless you really try. They don't come with adhesive which is great as I find the adhesive ones never stay on for long, so I just screw them in. Fantastic clips!

Scritto da: Alex L Holland

Zip Tie saddle warnings

These are good little zip tie saddles. The mounting hole in the middle is fairly small so you cannot use larger screws for mounting them. The biggest problem is not the size of the hole the screw would go through but the countersinking hole where the head of the screw has to sit down in. If you cannot get the screw to sit down in the hole, the openings on either side that the zip ties will go through get blocked. Probably a #6 is the largest head that can be used with these saddles. It would be nice to widen them out to at least a #8 screw head.

Scritto da: Pinhead

A little smaller than I thought but works well.

The product is well made. It is a little smaller than I thought so very small screws are needed to allow strap in.