Reese Towpower 81378 Klasse II Step Bumper-ontvangerkoppeling, zwart

Name: Reese Towpower 81378 Klasse II Step Bumper-ontvangerkoppeling, zwart
Brand: Reese
SKU: 016118813784
Price: 97.28 EUR
Availability: InStock

Brand:Reese

3.6/5

€
97.28

Indien uw voertuig niet voorzien is van bekabeling voor het trekken van een aanhanger, is CURT maatwerkbekabeling de ideale oplossing. Een op maat gemaakte kabelboom - ook wel een T-connector genoemd - is een eenvoudig, plug-and-play elektrisch apparaat dat wordt aangesloten op het elektrische systeem van uw auto en zorgt voor een standaard, universele aansluiting voor de bedrading van de aanhangwagen. Dit wordt gedaan met behulp van twee of meer voertuigspecifieke, OEM-compatibele connectoren die in het achterlicht worden gestoken, waardoor knippen, splitsen en solderen tijdens de installatie niet meer nodig is. Op maat gemaakte kabelbomen zijn voertuigspecifiek gemaakt en hoewel ze niet voor alle voertuigen beschikbaar zijn, bieden ze wel een van de snelste, gemakkelijkste en veiligste manieren om een voertuig te bedraden om te slepen. Deze specifieke plug-in kabelboom biedt een 4-polige platte connectoraansluiting en is ontworpen als een aangepaste kabelboom voor bepaalde jaren van de Hyundai Elantra, Elantra GT en Ioniq (zie toepassingsinformatie om de compatibiliteit van uw voertuig te controleren). Het wordt geleverd met alle benodigde bedradingscomponenten om een betrouwbare aansluiting voor de bedrading van de aanhanger tot stand te brengen, evenals een stofkap om de connector schoon te houden wanneer deze niet in gebruik is. Je hebt een beeld in gedachten van je volgende bestemming -- misschien is het de aanlegsteiger van je favoriete visstek, misschien is het een camping die uitkijkt op een van de meesterwerken van de natuur, of misschien is het de volgende grote werklocatie. Om dat beeld werkelijkheid te laten worden, is echter meer nodig dan alleen dagdromen. Er is een solide verbinding en de juiste hoeveelheid stroom voor nodig. CURT-bedrading op maat is gemaakt met de meest geavanceerde technologie in de branche en is ontworpen om gemakkelijk te installeren, waardoor u een langdurige elektrische verbinding krijgt voor uw trekhaakopstelling.

Geen eenheden beschikbaar

EAN: 016118813784

Categorieën Home & Garden, Tiers, Towing Products & Winches, Hitches, Receivers,

Kan worden vastgeschroefd aan de meeste bumpers in de fabriek voor een eenvoudige installatie. Draagt een tonggewicht van 350 pond en een bruto aanhangwagencapaciteit van 3.500 pond. Accepteert standaard 2 inch ontvangerstangen.

Brand	Reese
Brand	‎Reese
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 511 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Exterior	‎Machined
Finish Type	Powder Coated
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎81378
Item Weight	8 Pounds
Item Weight	‎8 pounds
Manufacturer	‎Reese Towpower
Manufacturer Part Number	‎81378
Material	HAWA
Model	‎Reese Towpower 81378 Class II Step Bumper Receiver Hitch
Product Dimensions	‎9 x 6 x 4 inches
Vehicle Service Type	Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Nelson Settles

Installed on My Pickup

I put this on the step bumper of my 1990 F150. It took some doing (drilling, filing, grinding), but I am very pleased with the results. I had to modify the rubber step pad to accommodate the bolt heads. BUT the whole installation was way easier than putting a full size frame-attach receiver on there. PLUS, it sets back the ball back 6 or 8 inches which gives a tighter maximum backing angle for my trailers. Its class 2, which will haul my utility trailer and my boat. I'm giving it a 4 because the instructions should come with a paper or cardboard hole pattern drilling template, but doesn't, and using the actual hitch for a template is awkward. You need to know how mark, pin punch and drill metal to install this, and I used the spacers on my installation to avoid the curved outer lip of my bumper.

Scritto da: Luke

Not tow bad

I bought this so I could add a Reese hitch on my truck instead of a bumper hitch. It’s more for a real basic step bumper like on an old Ford pickup or something. Since my truck is newer I had to do some modifications. The product came quickly and it was affordable and it is heavy duty. I think it’s going to work great.

Scritto da: Loren Thompson

Works good

Used it on a John Deere lawn mower, so it was a custom install. Seems sturdy and does the job. Decent value for the money.

Scritto da: Copper

Does not fit Ranger/mazda b series

Bought this for my 96 mazda b2300, which is basically a Ranger. It is too wide for this particular bumper. The mounting holes come dangerously close to the edges of the bumpers, i wouldnt trust it. This however is a vehicle specific problem, works fine on wider bumpers I had some doubts about just bolting a hitch to the bumper instead of installing it to the frame but it's rated higher than both the bumper itself and the truck's towing capacity. It went on really easy on my friends truck and works great for light towing. Definitely worth it for the 16.99$ i paid for it

Scritto da: Amazon Customer

If you do not have the means to drill it to fit you had better pass it up unless you have someone who will ...

I was gonna make this for my older S10 Blazer when I seen these already made. Its well constructed and mine was an open box sale but the hitch was new and priced cheaper than my time to do the cutting and welding to make. I plan on in the future to make a custom 4x4 rear bumper and will use this on it as well. You will need to drill holes in your bumper to mount this tho. If you do not have the means to drill it to fit you had better pass it up unless you have someone who will do it for you. FYI it is best to go ahead and buy grade 8 bolts to be safe. If it breaks loose you could murder an innocent bistandard.

Scritto da: Robert Welch

Reese Towpower Step Bumper Receiver

I purchased this receiver for use with my Yamaha golf cart at the campground. My golf cart did not have the flip seat which converted to a platform. I mounted the Reese receiver on the diamond plate foot rest on the rear so that I could install a trailer hitch for pulling the waste tank to the dump station. My additional purpose was to connect a mesh cargo carrier to the golf cart which I purchased for my Chevy Blazer. It was slightly wider than the cart but extemely handy to transport coolers and other beach gear. Finally, the receiver had the correct dimenstions to connect it to a mesh lawn wagon. It functioned extemely well going forward, but did need to be disconnected when backing due to its short tongue length. The Reese product was superior in being both rugged and heavy duty. I was a relief to find that it came with complete installation directions and all necessary hardware.

Scritto da: Eric White

step bumper

I have no clue way they call it a step bumper but what ever. I bought this product to mount/weld to a front round tub bumber that i bad. It comes with bolt but i dont end using them because i welded it to the bumper. I know that i wont be towing with it so i wont be able to test it to the limits but what i am going to be using it for is a reciver so i can put a winch on the front of my jeep and pull it off put it in the back if i need to. The product is a little under rated but for what i need i think that it will work. I would recommend this to anybody that would be using it for a place to put a winch. I wouldn't recommend it for towing a trailer and that is because of it low rating (Lbs)

Scritto da: David Ruiter

Perfect for the zero turn mower

This fit perfectly on my Gravely ZT HD-52 for using a 12V ATV broadcast spreader. Four 1/2" holes needed to be progressively carefully drilled, and the hitch bolted right on.

Scritto da: George Badger

Good value

Easy to install. All hardware included. Love it. Use it on the front of my quad. use it for parking trailors.

Scritto da: KHALED I.

The answer to your towing needs

economical alternative to a tow receiver bar, especially when towing light trailers, will not exhaust your budget, installs in minutes to most rear step bumpers (you can even use in the front), sturdy, welds are perfect,universal fit, way to go for sure.

Scritto da: Jacomo

Fittage!!!

Pour installer sur le devant d’un side by side. Winch transferable

Scritto da: pierre b.

will be perfect for my golf cart

As described, very strong, will be perfect for my golf cart.