0
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister

SharkBite 1/2 inch MNPT-adapter, push-to-connect messing sanitairfitting, PEX-buis, koper, CPVC, PE-RT, HDPE, U120LFA 1/2 inch.

Brand:SharkBite

3.7/5

€
26.07

PRODUCTBESCHRIJVING Vereenvoudig uw loodgietersbehoeften met de SharkBite Push to Connect MNPT mannelijke adapter. SharkBite-fittingen zijn gemaakt van duurzaam loodvrij messing en hebben een full-flow ontwerp voor maximale wateropbrengst. snelle installatie. Krimpen, lijmen, solderen of gereedschap is niet nodig, steek gewoon de buis in en de roestvrijstalen tanden bijten en grijpen stevig vast, terwijl een speciaal samengestelde O-ring wordt samengedrukt om een ​​perfecte afdichting te creëren. De MNPT-adapter kan eenvoudig worden gedemonteerd met behulp van een ontkoppelingsgereedschap, zodat fittingen en kleppen eenvoudig kunnen worden vervangen en hergebruikt (ontkoppelingsgereedschap niet inbegrepen). De MNPT-fitting kan na montage zelfs worden gedraaid om een ​​eenvoudigere installatie in krappe ruimtes mogelijk te maken. Deze MNPT-sanitairfitting is een gecertificeerde vervaardigde verbinding die kan worden geïnstalleerd in natte leidingen en voor zowel ondergrondse als achter-de-muurtoepassingen. De MNPT push-to-connect-adapter is geschikt voor 200 psi en 200 graden F en wordt geleverd met een garantie van 25 jaar. VAN DE FABRIKANT SharkBite is het push-fit verbindingssysteem dat echt aanslaat. Het is de gemakkelijkste manier om koperen, CPVC- of PEX-buizen in elke combinatie te verbinden - zonder solderen, klemmen, koppelingen of lijm. Steek gewoon de buis in en de roestvrijstalen tanden bijten en grijpen stevig vast, terwijl een speciaal samengestelde O-ring samendrukt om een ​​perfecte afdichting te creëren. Demontage gaat net zo snel met behulp van de eenvoudige ontkoppelingstool. Zo kunnen fittingen en ventielen eenvoudig worden vervangen en hergebruikt. Ze kunnen na montage zelfs worden gedraaid voor een eenvoudigere installatie in krappe ruimtes. Koop SharkBite en krijg grip op uw volgende sanitairproject. Deze fittingen zijn loodvrij en voldoen aan alle eisen voor sanitair in Californië en Vermont.

Hoeveelheid
Voeg toe aan winkelkarKoop nu

EAN: 0697285465763

Categorieën Tools & Home Improvement, Rough Plumbing, Pijpen, Pijpfittingen & Accessoires, Buisfittingen,

GECERTIFICEERD: MNPT-fitting is gecertificeerd als een gefabriceerde verbinding en kan worden gebruikt voor ondergrondse en achter-de-muurtoepassingen zonder toegangspanelen; geschikt voor 200 psi en 200 graden F. DUURZAAM: Fitting is loodvrij en corrosiebestendig voor langdurige duurzaamheid en betrouwbaarheid. COMPATIBEL MET KLEINE RUIMTEN: Messing fitting kan na installatie eenvoudig op de buis worden gedraaid voor gebruik in krappe ruimtes. GEMAKKELIJK TE GEBRUIKEN: Rechte connector met een innovatief push-to-connect ontwerp zorgt voor een snelle en eenvoudige installatie; geen gereedschap, solderen, krimpen of lijm nodig. MESSING MALE FITTING: Mannelijke fitting kan worden gebruikt om verbinding te maken met elke combinatie van koperen, PEX, CPVC of PE-RT leidingen; kan worden gebruikt voor natte lijnen.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Brass
Color ‎Brass
Connector Type Adapter
Connector Type ‎Adapter
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Fitting
Installation Method ‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10.75 x 4 x 6.25 inches
Item Dimensions LxWxH ‎10.75 x 4 x 6.25 inches
Item model number ‎U120LFA
Item Package Quantity ‎1
Item Weight 0.1 Pounds
Item Weight ‎0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 2
Number Of Pieces ‎2
Part Number ‎U120LFA
Product Dimensions ‎10.75 x 4 x 6.25 inches
Size 1/2 in.
Size ‎1/2 in.
Style ‎Brass Push Male Adapter
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎Lifetime

3.7

13 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: AmazoCedric
The Amazing Sharkbite 1-1/4 connector fitting
This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.
Scritto da: Wendy Chan
It works!
Easy to install and very solid connection. It serve the purpose.
Scritto da: John
Quality
Excellent product
Scritto da: Veetuch
Easy to use
Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.
Scritto da: Anonimo
Initially concerned....
Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!
Scritto da: Reality Check
This fitting really saved the day
I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.
Scritto da: Tom Holland PA
Easy
If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.
Scritto da: T Nielson
false advertising
It said it was a pack of 6, I only got 1
Scritto da: Synonymous
Working great so far
Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.
Scritto da: Mountain man.
Slips on easily and no leaks
Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.
Scritto da: Super Dave
Works great, very long delivery time
First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch
Scritto da: Debashis Dey
New age fittings
Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.
Scritto da: claude
exellent
who ever invented these should be made king

Gerelateerde producten

hot
SharkBite 1-1/2 x 3/4 inch messing krimpverminderende koppeling, PEX-buis, PE-RT, UC014122
0.1/5

€ 43.36

SharkBite 1-1/2 x 3/4 inch messing krimpverminderende koppeling, PEX-buis, PE-RT, UC014122
0.1/5

€ 43.36

hot
Fluidmaster B3H18 waterverwarmerconnector, gevlochten roestvrij staal - 3/4 mannelijke ijzeren pijpdraad x 3/4 vrouwelijke ijzeren pijpdraad, 18-inch lengte
3.5/5

€ 42.18

Fluidmaster B3H18 waterverwarmerconnector, gevlochten roestvrij staal - 3/4 mannelijke ijzeren pijpdraad x 3/4 vrouwelijke ijzeren pijpdraad, 18-inch lengte
3.5/5

€ 42.18

hot
LASCO 25-6817 flexibele rubberen connector voor afvoerpijp met klemmen voor 2 pijp tot 1 1/2 gietijzer
4.1/5

€ 28.65

LASCO 25-6817 flexibele rubberen connector voor afvoerpijp met klemmen voor 2 pijp tot 1 1/2 gietijzer
4.1/5

€ 28.65

hot
NDS ronde Spee-D opvangbakafvoer met 1 uitlaat, 6 inch, zwart
3.8/5

€ 51.98

NDS ronde Spee-D opvangbakafvoer met 1 uitlaat, 6 inch, zwart
3.8/5

€ 51.98

hot
NIBCO 5817 2 Naafdop ABS DWV
4.1/5

€ 28.90

NIBCO 5817 2 Naafdop ABS DWV
4.1/5

€ 28.90

hot
Parker 46F-10-6-pk20 45 graden fitting, flare naar vrouwelijke pijp, messing, flare en vrouwelijke pijpconnector, 5/8 en 3/8 (20 stuks)
0.1/5

€ 52.16

Parker 46F-10-6-pk20 45 graden fitting, flare naar vrouwelijke pijp, messing, flare en vrouwelijke pijpconnector, 5/8 en 3/8 (20 stuks)
0.1/5

€ 52.16

hot
LASCO 17-6809 3/16-inch compressie door 1/4-inch buitendraad messing adapter
3.7/5

€ 35.82

LASCO 17-6809 3/16-inch compressie door 1/4-inch buitendraad messing adapter
3.7/5

€ 35.82

hot
Westbrass D401-PF-12 decoratieve styreen P-trap, met olie ingewreven brons
3.1/5

€ 43.47

Westbrass D401-PF-12 decoratieve styreen P-trap, met olie ingewreven brons
3.1/5

€ 43.47

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array

Totaal:€ 0.00

Zie winkelwagenUitchecken

Categorieën

Alle categorieën
Menu Categorieën In de buurt van Winkelwagen

Menu