Southwire Bmeh-18 Heavy Duty Romex Elektricienshamer; Romex nietjesverwijderaar; Tethergat voor veiligheid; 18 oz hoofd met glad gezicht; Heavy Duty gesmeed staal -65116740 18 oz. Hoofd

Brand:Southwire

3.8/5

61.23

KleenGuard persoonlijke beschermingsmiddelen (PBM) maken mogelijk in plaats van remmend – waardoor maximale productiviteit en veiligheid voor u en uw medewerkers mogelijk wordt. De Kleenguard A45 overall voor bescherming tegen vloeistoffen en deeltjes voor oppervlaktevoorbereiding en verf is ontworpen om mee te bewegen met werknemers waar gevaarlijke of niet-gevaarlijke verontreinigingen aanwezig kunnen zijn. Elk beschermend pak is gemaakt van lichtere stof (dan Kleenguard A40) wat zorgt voor meer comfort, zonder dat dit ten koste gaat van de bescherming. Ze zijn niet gemaakt met natuurlijk rubberlatex en zijn siliconenvrij, ze voldoen aan NFPA 99 voor antistatische materialen, en ze hebben serged naden en een waterbestendige ritssluiting. Deze kledingstukken hebben een capuchon, nieuwe antislip laarzen, ritssluiting aan de voorkant en elastische polsen en enkels (EWA) en zijn ideaal voor gebruik in toepassingsgebieden waar isocyanaat (40%) en chromaat (10%) stofbescherming verplicht is. Het Reflex Overall Design biedt een uitstekende pasvorm en bewegingsvrijheid, en de kap is ontworpen om te passen met een ademhalingsapparaat. De nieuwe slipbestendige laarzen die tot 68% meer tractie bieden op natte en droge oppervlakken in vergelijking met ons vroegere materiaal voor laarzen. Het maken van de juiste keuze voor Persoonlijke Beschermingsmiddelen is moeilijk. Presteren met onderscheiding met KleenGuard Persoonlijke Beschermingsmiddelen (PBM).

Comfortabele handgreep: Comfortabele handgreep helpt uitglijden tijdens gebruik te voorkomenGebouwd voor de elektricien: kenmerken zijn specifiek ontworpen voor de behoeften van elektriciens Klaar voor bevestiging: opening in handgreep voorzien voor bevestiging van koord/lijn voor extra veiligheid. Glasvezelhandvat: hoge sterkte; lichtgewicht glasvezel handvat voor trillingsbestendigheid en schokabsorptie. Romex nietjesverwijderaar: met de handige Romex nietjesverwijderaar kunnen Nm-draadnietjes eenvoudig worden verwijderd zonder de draad te beschadigen. Verlengde hals: extra lange hals is ideaal om in stopcontactdozen en andere krappe ruimtes te reiken, waardoor het de perfecte hamer is voor elektriciens. Heavy duty: 18 oz kop Gemaakt van gesmeed staal voor maximale kracht en duurzaamheid.
Batteries Required? ‎No
Brand Southwire
Brand ‎Southwire
Color Black
Color ‎Black
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 919 ratings 4.7 out of 5 stars
Grip Type Contoured
Grip Type ‎Contoured
Handle Material Alloy Steel
Handle Material ‎Alloy Steel
Head Style ‎Extended
Included Components ‎18 OZ Electrician's Hammer
Item model number ‎65116740
Item Package Quantity ‎1
Item Weight 18 Ounces
Item Weight ‎1.12 pounds
Item Weight ‎18 Ounces
Manufacturer ‎Southwire
Package Dimensions ‎13.94 x 6.69 x 1.69 inches
Part Number ‎65116740
Style ‎18 oz. Head
Warranty Description ‎Limited Lifetime

3.8

13 Review
5 Star
83
4 Star
11
3 Star
4
2 Star
1
1 Star
2

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: dcook
Perfect electricians hammer
The stapler puller kind of stupid. But the long neck is great I really like this hammer.
Scritto da: Leonard
Great hammer, takes some getting used to.
It’s a great hammer overall. The claw is amazing for getting at staples over romex. The only thing that prevented it getting a 5 star was that it is awkward to use at first if you are used to regular shorter faced hammers. I understand the purpose of the elongated striking face, but it was very different from what I was used to so it really isn’t a fault of the hammer. It really allows you to strike staples over studs without smashing your fingers and getting to those over-hammered staples from your coworkers/fellow electricians. Like I said though, great hammer overall.
Scritto da: Bohn
Awesome
I’m a residential electrician. I’ve went through many hammers trying to find the perfect one and this is it! The staple remover is perfect for if you forget your dikes while under a house ????????
Scritto da: Tom Whiteman
Gets to the back of the box
Great for nailing in boxes and other tight spots! Plus the staple remover gets into them easy . 5 stars, and I may buy another for the truck!
Scritto da: RaiderSwish
Nicest and best looking hamma on every job site ????
Great weight, feel, and quality. The prong teath on the back have many uses and have come in handy & it's a extra tool.
Scritto da: grd134
Hammer does not perform well for roughing in homes and stapling romex.
Have used this hammer to rough-in two houses in the past month. This should be where an "electrician's hammer" shines. However, I have already abandoned it for a simpler 16oz framing hammer and am much happier. The most important feature of the hammer is arguably the staple remover. It works "ok" at best. It will not remove staples that are driven snugly to the romex. It can be difficult to slide it under the staple without damaging the outer jacket of the wire. It is nice when it works, but considering that it does not always get the job done, you are better off keeping a pair of diagonals in your back pocket to complete this task. The most annoying drawback of this claw design is that it makes it incredibly difficult to remove nails, which is a necessary function on occasion. I'm not sure what exactly the extended head is for, but it serves no purpose that I am aware of when roughing-in a residential house. It actually makes the hammer awkward to use when hammering staples because the head is so far extended from the handle. Also the hammer weighs 18oz. This makes it heavier and unbalanced compared to a 16oz hammer, which has more than enough force to drive staples without the need for added weight. The construction of the hammer is not great. There is a visible line of glue where the head of the hammer meets the shaft, and the soft rubber handle damages easily. I would not prefer this hammer in any way over any of the tried and true performing framing hammers. It performs its intended task, but it does not excel at it. I would not purchase this hammer again. Let Southwire stick to manufacturing wire.
Scritto da: Branden Henrichs
Little longer then normal
As long as you dont need to use this in tight places, its a good tool.
Scritto da: Amazon Customer
Hammer
????
Scritto da: Amazon Customer
Good hammer, just remember to wear gloves if using it for long periods
I like the balance of this 18oz hammer. It's a handsome looking hammer too. Handle is fibreglass + rubber. It offers a good grip. Doesn't transmit too much shock during use, but my index finger did get a friction blister after about 50 swings. So do wear gloves if using the hammer for prolonged periods.
Scritto da: Danielle
Good quality
My son was looking for this hammer and was not able to find it anywhere. Ordered this on line and it arrived quickly.
Scritto da: Aj
Junk
Bought this hammer in July and now Oct 2 and it snapped at the head . Not built well
Scritto da: Emma
Livraison très rapide. Super achat!
Très bonne qualité. Pas trop lourd. Encore mieux que je pensais.
Scritto da: Markir
Great product!
Great product!

Gerelateerde producten

hot
16OZ 1 ST STAAL CURVE KLAUW HAMER
3.9/5

€ 57.61

16OZ 1 ST STAAL CURVE KLAUW HAMER
3.9/5

€ 57.61

hot
DWT 16OZ 1PC STALEN RIP KLAUWHAMER
3.8/5

€ 57.47

DWT 16OZ 1PC STALEN RIP KLAUWHAMER
3.8/5

€ 57.47

hot
CS Osborne Magnetische Tack Hammer
0.1/5

€ 91.60

CS Osborne Magnetische Tack Hammer
0.1/5

€ 91.60

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array