Steelex D1041 conische verzinkbitset, 22-delig

Name: Steelex D1041 conische verzinkbitset, 22-delig
Brand: Steelex
SKU: 787721067511
Price: 51.79 EUR
Availability: InStock

Brand:Steelex

3.3/5

€
51.79

PRODUCTBESCHRIJVING IRWIN 326020 5/8 x 8 x 12 steenboor met rechte schacht, 1/2 schacht VAN DE FABRIKANT Gemaakt volgens ANSI-specificaties, de IRWIN 326020 - 5/8 x 8 x 12 steenboor met rechte schacht en 1/2 schacht, is de volgende generatie hamerboor met rechte schacht die betere prestaties levert dan ooit. Het gepatenteerde spaangroefontwerp versnelt de stofverwijdering voor snel boren en een lange levensduur, terwijl de kogelgestraalde afwerking de duurzaamheid van het oppervlak verhoogt en de kans op breuk vermindert. Dit aanbod van metselwerkbits met rechte schacht demonstreerde IRWIN's toewijding aan de lijn en de beroepen die erop vertrouwen.

Geen eenheden beschikbaar

EAN: 787721067511

Categorieën Tools & Home Improvement, Power & Hand Tools, Krachtgereedschap Onderdelen & Accessoires, Power Drill Parts & Accessories, Drill Bits, Countersink Bits,

Item Pakket Gewicht: 8.0 oz. Item Pakket Afmeting: 7.399999992452 L x 7.099999992758 B x 0.299999999694 H. Modelnummer: D1041. Land van herkomst: Verenigde Staten.

Batteries Required?	‎No
Brand	Steelex
Country of Origin	‎China
Customer Reviews	4.2 4.2 out of 5 stars 71 ratings 4.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Steelex 22 pc. Tapered Countersink Set D1041
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	7.4 x 7.1 x 0.3 inches
Item model number	‎D1041
Item Package Quantity	‎1
Item Weight	‎8 ounces
Manufacturer	‎Steelex
Number Of Pieces	‎22
Part Number	‎D1041
Product Dimensions	‎7.4 x 7.1 x 0.3 inches
Shank Type	Straight
Tool Flute Type	Spiral

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: polrbear

A great value

I'm on a budget, so the higher end products are not in the cards for me. I found these and decided to give them a try. Some care needs to be taken: as another reviewer pointed out, they aren't as good when bringing the stop collar for the countersink up around the flutes, but I've had good success aligning them carefully onto the bit instead of into the grooves and have had no issues. The bits are sturdy, sharp, and have given me no problems on pine or oak. They have their quirks about them, typical of their price range, but they work about as well as the higher-end ones I've tried in the store--once the learning curve has been achieved. My set went missing for a bit, so I bought a cheaper version that wasn't worth anything, so I was quite relieved when this set resurfaced. Overall, these are a good value that, with some time spent practicing and a little bit of using your head, are worth more than their price, but aren't quite in the league of their professional-grade counterparts.

Scritto da: PresidentsDad

You get what you pay for.

Works well for the price. A bit fragile, but might have been due to my negligence. One bit broke in the middle of a project, but otherwise a decent product.

Scritto da: M. R. Berry

Steelex D1041

Good bits and the countersink with depth stop works great. In the middle of a project I had the countersink/depth stop loosen- that's when I found the set screws in the countersink and the depth stop are a special size and only work with the one allen wrench that comes with the bits - which is a bad thing considering I own hundreds of allen wrenches. Luckily I was able to find a standard size set screw at a local hardware store and replaced all of them. Have not had any other problems and am working with furniture grade laminated plywood, drilling 2.5" to 3.0" deep holes. A tapered bit is a great item and allows a lot of flexibility and faster assembly.

Scritto da: Carol A Young

Impressive gift

These were a gift to hubby brother. My husband is a contractor. He was pleased and impressed with the quality.

Scritto da: Emanuel Flecker

Great tool(s) though they need a box/container as there are ...

Great tool(s) though they need a box/container as there are several small parts that can disappear quickly if not properly contained - especially a small hex wrench and the adjustable collars.

Scritto da: Duncang

They work, mostly...

Be careful where you tighten the stops, they can (and will) slip if not dead on. These are not usable in the field, but are fine on a drill press (we broke the #5 bit after about 6 holes in a hand drill). Be aware, that these are also VERY aggressive bits and will pull you drill in if you're not careful. I'll probably replace these with something else when needed.

Scritto da: KLudeman

Very nice. Shipped quick and arrived as expected

Very nice. Shipped quick and arrived as expected.

Scritto da: R. E. Williams

Disappointed

I purchased this set because the idea of a countersink, with a correctly sized tapered pilot hole in one step seems like a time saver. The set delivers on these points as long as you don't need to move the countersink towards the tip to accommodate a shorter screw. The set screws that hold the countersink in place have very little to take purchase on when it is moved onto the flutes of the drill bit. Thus, the countersink has both slipped and wobbled. This set will go in the trash when I receive the 3pc Pro Countersink Set from Rockler. This system uses a much longer sleeve between the countersink and the drill bit allowing you to move the drill within the sleeve and having adequate purchase for the set screws of the countersink.

Scritto da: R. Cervantes

Buenas herramientas

Buen material de los avellanadores con diferentes ajustes para profundidad de la broca y profundidad para el tapón de madera, el problema para mi es que la broca está muy gruesa y si la broca entra demasiado el tornillo queda flojo y no sujeta esto sucede con tornillos del número 8 con tornillos de mayor calibre no hay tanto problema.

Scritto da: Amazon Customer

Sizes are way off

The smallest of these bits, labelled for a #5 screw, is 1/8". The next size up is 9/64" which is about the same size around as a #11 screw so it is no good for even that. Then we get 5/32", 11/64", 3/16", 13/64", and an astounding 7/32" (about the same size as a #20 screw, so it is too large for that let alone a #12). Unless I am missing something completely, none of these sizes are typical when using non-tapered bits and are way too large.

Scritto da: Amazon Customer

but annoyed that the package looked opened and was missing the ...

I just got mine. Haven't used them yet, but annoyed that the package looked opened and was missing the allen key. Don't know if it was removed from the package, or damaged in transport and fell out. Other than that, they look pretty good. I'll try to update when I've used them. They do reek of oil, but that's not a big concern.

Scritto da: MARIO M.

Buen producto

Los grosores de las brocas son más amplios que la medida que indican pero a los avellanadores se les puede adaptar otra broca si erés curioso.

Scritto da: Nameloc

Excellent value

These worked great for the 800 perfect countersunk holes we needed to drill.