TANDWIELSLEUTEL 27 st. 1/4 Aandrijving 6 Pt. Pass-Thru™ Mechanica-gereedschapsset, standaard SAE/metrisch - 891427

Name: TANDWIELSLEUTEL 27 st. 1/4 Aandrijving 6 Pt. Pass-Thru™ Mechanica-gereedschapsset, standaard SAE/metrisch - 891427
Brand: GEARWRENCH
SKU: 971475994319
Price: 135.01 EUR
Availability: InStock

Brand:GEARWRENCH

3.7/5

€
135.01

Het pass-thru-socket en GearRatchet-ratelsysteem van GEARWRENCH is ontworpen om de productiviteit en toegankelijkheid bij elke klus te verbeteren. De GearRatchet-ratels hebben slechts 5 graden nodig om bevestigingsmiddelen te verplaatsen versus 30 graden voor standaard sleutels en zijn 40 procent sterker dan standaard ratels door de aandrijfdoorn te elimineren. De ratels zijn tot 50 procent dunner dan standaard ratels en bieden superieure toegang tot zelfs de moeilijkst bereikbare bevestigingsmiddelen. De doorsteekcontactdozen zijn dunwandig uitgevoerd. Ze vervangen de behoefte aan diepe putdoppen omdat ze moeren losdraaien en aandrijven op bouten van elke lengte. De pass-thru-sockets zijn geïntegreerd in de GEARWRENCH GearRatchet-handgreep, waardoor de totale hoogte afneemt en het koppel toeneemt. De GEARWRENCH-adapter maakt het gebruik van standaard dopsleutels en aandrijfgereedschappen mogelijk. De 891427 is een 27-delige 1/4 inch SAE/metrische 6-punts set met 5/32 inch tot 9/16 inch en 3,5 mm tot 13 mm doppen, 1 aandrijfadapter om te zetten voor gebruik met standaard doppensets, 2 verlengstukken, en een XL locking flex GearRatchet-ratel. De set zit in een blaasgegoten koffer voor opslag en het vasthouden van gereedschap. Tot 50% dunner kopprofiel dan conventionele ratelsystemen 5 graden ratelboog Tot 40% sterker dan traditionele ratels door het elimineren van de aandrijftang Pass-thru socketsysteem maakt diepe putdoppen overbodig 11 vergrendelbare kopposities Comfortabele handgreep van twee materialen

Geen eenheden beschikbaar

EAN: 971475994319

Categorieën Tools & Home Improvement, Power & Hand Tools, Handgereedschap, Wrenchches, Socket Wrenches,

Inclusief 1/4-inch snelspanadapter en 6-inch holle verlenging. Langere doppen betekenen een groter bereik en meer koppel. Vergrendelbare flexibele kop met verstelbare hoeken verbetert de toegang. 1/4-inch aandrijfdoppen met exclusieve Pass Thru-dop en ratelsysteem; geen behoefte aan diepe kassen.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	GEARWRENCH
Brand	‎GEARWRENCH
Country of Origin	‎Thailand
Customer Reviews	4.7 4.7 out of 5 stars 646 ratings 4.7 out of 5 stars
Finish	‎Polished
Finish Type	‎Polished
Head Style	‎Fixed Square, Hex, Flex
Included Components	‎Ratchet 2 Extensions Adapter 10 Standard SAE Pass-Thru™ Sockets 13 Standard Metric Pass-Thru™ Sockets
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	8 x 4 x 2 inches
Item Dimensions LxWxH	‎8 x 4 x 2 inches
Item model number	‎891427
Item Package Quantity	1
Item Package Quantity	‎1
Item Weight	200 Grams
Item Weight	‎200 Grams
Item Weight	‎7.1 ounces
Manufacturer	‎GEARWRENCH
Material	Alloy Steel
Material	‎Alloy Steel
Measurement System	‎Inch, Metric
Operation Mode	‎Mechanical
Part Number	‎891427
Power Source	‎Hand_powered
Product Dimensions	‎8 x 4 x 2 inches
Size	‎42373
Style	‎891427
Thickness	‎8 Inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Liz Graham

Great product and Value.

The media could not be loaded. Bought these for my husband for Christmas. He loved them has already used them and says they work great. I would definitely suggest gifting them.

Scritto da: James Strack

Good but could use improvements

I'm a commercial electrician and this set is useful because it works well with all threads for setting up racks. One thing I'm disappointed on is the 3/8 ratchet 3" reach extension is too big to fit inbetween a strut. If it was a 1/4" less thick it would fit in and be really nice. Overall it's a want thing for a electrician not a must have, but should save some time for me. I like the product.

Scritto da: Salute Your Shorts

Rarely used, but extremely useful when needed.

If you don't have a specific need for this, this is still one of the tools that you should buy and keep handy. You may use it rarely, but when you actually do need it you'll be very glad you have it. There are competitors that sell similar socket sets for less money, but I have no complaints with the Gearwrench brand

Scritto da: advrider1

Amazing

This little set has saved me half a dozen times. It’s the best little travel socket set you could ever by

Scritto da: noah

What is there is GOOD; Needs a touch more

I've thought of this system for many years. I am senior with MANY tools. Tough to justify more, but I kept running into difficult situations, so__. Bought the 1/4 and the 3/ 8 sets. I said a mental thank you quite few times using them. They made difficult much easier. I would give them 5*'s except for two and another aspects. Whereas GearWrench provides an adapter to go from 'pass-thru' female to 1/4 & 3/8male square drive respectively; none is provided to go from 1/4 & 3/8 female square drive to the pass-thru male drive of the extensions or sockets, therefore a torque wrench, or air or electric ratchet cannot be used. Manual ratcheting only. I have GearWrench's tap and die driver set which has a 3/8" female square drive to the pass-thru 3/8" Female, GearWrench # 82804, _so I used that for the 3/8 conversion. And have ordered a 1/4 drive - 7/16 12 point socket, which I will remove every other tooth of and think I can make it will work as a 1/4 square female to 1/4 pass-thru adapter. Also, and this is true of most sets irrespective of pass-thru, I many times wish for multiple lengths of very short extensions; 1.0", 1.5", 2" . I have a couple of 1/2" extensions , one of 1.0" the other ~ 1.25" 0r 1.5". No clue of brand but oh so glad I have them when needed. I like the sets and recommend them. If I weren't so demanding, they'd get 5*s. Great for tight quarters. Good snug GearWrench "surface-drive" socket fits.

Scritto da: Romuald

Good wrench but not without its weakness.

This is an awesome drive system BUT... Gearwrench should engineer a quick release for the wrench itself (like a separate button or slide lock) to allow for the sockets to be removed easily. The flaw I'm about to discuss is inherent in the design of the wrench and not limited to gearwrench. Currently the sockets need some effort to insert or remove from the wrench. This tells me that with frequent use, there will be wear such that the socket will insert and remove more easily but the sockets will likely fall out of the wrench due to looseness. This is very bad in limited space where there is a high probability of losing the sockets. With a locking or unlocking mechanism engineered into the wrench, the socket will not wear down the mechanism for securing the socket inside the drive insert of the wrench, AND at the same time, also allowing for quick change of the sockets. I hope that Gearwrench will consider this for the next gen wrenches. Even so, this is an awesome wrench. I just question how long I can go without losing sockets to limited access areas.

Scritto da: Garry

Costly but worth it you get what you pay for

Name plate falls off often

Scritto da: Unklejayjay

nice

one of the best tool set that i've gotten so far

Scritto da: Pedro

Muy buen juego, que contiene las muy poco comunes pero útiles medidas 3.5, 4.5, y 5.5mm.

Ya conozco la marca y aunque estos últimos años ha bajado ligeramente su calidad, afortunadamente me ha tocado recibir buena herramienta. Este juego era prácticamente lo único que me faltaba para completar mi set de dados de 6 lados que es la opción que siempre he preferido por resistencia (los únicos dados multi propósito o universales que han resistido mi ritmo de trabajo son los craftsman), nada que decir en contra, los 23 dados (que es como tener 46 ya que al ser pass-thru es como tener el dado bajo y profundo en uno), el adaptor normal de pass-thru a drive normal cuadrado de 1/4" y las dos extensiones (una de 3" y una de 6") son de muy buena calidad, y la "flex-head" de 11 posiciones es muy versátil.