UltraPro Add-On Switch QuickFit en SimpleWire, alleen in-wall witte rocker paddle, Z-Wave ZigBee draadloze slimme verlichtingsbediening, GEEN STANDALONE schakelaar, 2 stuks, 54905

Name: UltraPro Add-On Switch QuickFit en SimpleWire, alleen in-wall witte rocker paddle, Z-Wave ZigBee draadloze slimme verlichtingsbediening, GEEN STANDALONE schakelaar, 2 stuks, 54905
Brand: UltraPro
SKU: 0030878549059
Price: 66.87 EUR
Availability: InStock

Brand:UltraPro

3.6/5

€
66.87

Verbeter uw controle met de UltraPro Add-on Switch met QuickFit™ en SimpleWire™. In combinatie met een slimme schakelaar, dimmer of ventilatorbesturing maakt het bekabelde apparaat systemen met meerdere schakelaars compleet. Het werkt naadloos samen met slimme apparaten van UltraPro, GE, Jasco, Enbrighten en Honeywell. Bedien en plan draadloos armaturen voor binnen of buiten vanaf maximaal vijf locaties voor moeiteloos beheer van uw huis.

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0030878549059

Categorieën Tools & Home Improvement, Elektriciteit, Switches & Dimmers, Muurschakelaars, Lichtschakelaars,

Werking met meerdere schakelaars – De schakelaar is geen op zichzelf staand apparaat. Het moet worden gebruikt met een slimme bediening voor domotica. De slimme schakelaar of dimmer en maar liefst vier opzetschakelaars kunnen worden gekoppeld voor bediening vanaf maximaal 5 locaties. Licht-commercieel geschikt - Ondersteunt 120VAC en 277VAC voor universeel gebruik in een verscheidenheid aan systemen. De schakelaar is geschikt voor gebruik in gewone huis 120VAC of licht-commerciële 277VAC toepassingen zonder extra apparatuur. SimpleWire – Dubbele aardingspoorten, die verschoven zijn om montageschroeven van de schakelkast te vermijden, ondersteunen daisy-chaining in multi-switch setups. QuickFit - Verbeterde componenten hebben de diepte van de behuizing tot 20% verminderd in vergelijking met eerdere modellen en hebben de noodzaak voor warmtelipjes geëlimineerd. QuickFit-uitbreidingen zijn de ideale oplossing voor oudere schakelkasten, meervoudige configuraties of elke andere toepassing met beperkte ruimte. Revolutionair ontwerp waarvoor patent is aangevraagd - QuickFit- en SimpleWire-technologieën bieden baanbrekende functies voor huisautomatisering. Unieke verbeteringen maken de slimme bediening eenvoudiger te installeren en betrouwbaarder dan ooit.

Actuator Type	‎Rocker
Batteries Required?	‎No
Brand	UltraPro
Brand	‎UltraPro
Certification	‎UL
Circuit Type	‎5-way
Color	‎White
Connectivity Protocol	‎Z-Wave
Connector Type	Clamp
Connector Type	‎Clamp
Contact Material	‎Metal
Contact Type	Normally Open
Contact Type	‎Normally Open
Control Method	‎Touch
Country of Origin	‎China
Current Rating	15 Amps
Current Rating	‎15 Amps
Customer Reviews	4.6 4.6 out of 5 stars 379 ratings 4.6 out of 5 stars
Included Components	‎2 Add-On Switches
International Protection Rating	‎IP54
Item Dimensions LxWxH	1.92 x 2.14 x 4.15 inches
Item Dimensions LxWxH	‎1.92 x 2.14 x 4.15 inches
Item model number	‎54905
Item Package Quantity	‎1
Item Weight	‎7.4 ounces
Lower Temperature Rating	‎32 Degrees Fahrenheit
Manufacturer	‎Jasco Products Company, LLC
Material	Plastic, Metal
Material	‎Plastic, Metal
Mounting Type	‎Wall Mount
Number of Items	‎2
Number of Positions	‎1
Operating Voltage	120 Volts
Operating Voltage	‎120 Volts
Operation Mode	ON-OFF
Operation Mode	‎ON-OFF
Part Number	‎54905
Product Dimensions	‎1.92 x 2.14 x 4.15 inches
Size	‎2 Pack
Switch Style	Rocker
Switch Style	‎Rocker
Terminal	Screw
Terminal	‎Screw
Unit Count	‎2.0 Count
Upper Temperature Rating	‎104 Degrees Fahrenheit
Warranty Description	‎5 Year Limited

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Steve

Easy & well thought out installation! Works with Qyolsys alarm panels.

I wanted to update and upgrade my alarm system and home automation. Found these and they are much more reasonable in price then what the alarm companies are selling or recommending. My only grip was when you have to do a 3-way set up, you still need 2 switches to do it. Some other manufacturers allow you to use a standard paddle switch and just have one z-wave switch. Not a big deal, but a way of giving the consumer more bang for the buck. I ended up replacing 14 switches throughout the house. The Qyolsys Panel 4 learned all of them without a hiccup! Everything is working flawlessly through the app and manually. I like that the blue light can be programmed to be on when the switch is not in use and works as a night indicator at the same time. They look great, even when located next to a standard paddle switch. If you are comfortable installing or changing out an electrical switch, you'll find these a breeze. One thing that stood out is the double inlets for each wire. It really makes it easy when doing multiple switches next to one another. You can bring the wire into the first inlet and use the second one as an outlet to feed the switch next to it. I would recommend these to anyone wanting to get into home automation! Hope to see some z-wave wall outlets in the future as well!

Scritto da: Valerie

Worked, but compatible with my LEDs.

I have used this brand/model of switches a few times in my house and have had great luck. As for this add-on, the instructions allow for an easy addition to a 3-way setup of: power-to-switch1- to-switch2-to-light. The add-on switch DOES NOT WIRE the same as a dumb switch. The diagram was a little confusing for me (on where they labeled the load to the light), but looking back on how it was to be setup, it makes sense. So... you’ll need to verify your current wiring system and figure out which switch has the power coming to it. If you can’t do that, hire someone. So the switch with power will be your main smart switch (not this add on). The second switch will be this add-on switch. The add on switch needs a neutral connected and it will need the traveller wire from the first switch connected to it. The load wire from the first switch gets tied directly to the light’s line-in. Note, this is not how a traditional wiring goes. Why? So basically the add-on switch sends a “signal” through the traveller wire to the main smart switch, which then toggles the light on off. Boom done. Special note about LED compatibility and these smart switches: You need X amount of watts on your circuit. I think it’s 25W-35W? So not all LEDs will work well with this setup because there’s not enough power. Second, LED dimming is different than incandescent dimming. It’s due to the electronic component differences. So not all LED designs are compatible with this switch. I think I did see on another review that this is a TRIAC dimmer. You’ll see a flicker at all ranges of dimming if this is your issue. If you see a flicker only near the max or min of dimming, you can adjust the switch’s max and min to not reach the flicker stage. Between those two issues, I was unable to use this model pairing on my retrofit Halo lights 4-in 60-Watt Equivalent White Round Dimmable Recessed Downlight (RA404930WHR). I will need to use them elsewhere in the house since I bought then so long ago. For those lights I bought Inovelli’s dimmer switch and it works well. This add-on dimmer switch did not work for me with my Inovelli dimmer with my LED setup.

Scritto da: Catawampus

Easy to install; looks nice; doesn’t work with Alexa

The switch itself is great. However, it does not work with Alexa if you are using Ring system. Due to what appears to be a bug, Alexa is not updating list of new Z-wave devices added to Ring account. There’s a ton of bug reports out there on Amazon and other forums since Nov of last year. Doesn’t look like Amazon has a clue on how to fix. Unfortunately, this switch is going back for this specific reason. If it had worked with Alexa, it would have been great.

Scritto da: KC

Add-on switch for 3 way - 4 way lighting using Jasco wireless switch devices

I installed the add-on switch for a GE Enbrighten switch that was made by Jasco. Enbrighten, Honeywell and UltraPro Z-wave switches look like they are all made by Jasco and can use these add-on switches. Had to connect the neutral and the traveler wire to get the add-on switch working which was fairly straightforward. Only downside is there is no LED indicator on the add on switch, but everything else looks like the standard Z-Wave switch. In hindsight, I think it might be better buy Z-Wave switches that can use a standard mechanical switch for a 3-way switch as I don't see any usefulness of these add-on switches other than requiring a switch needed for 3 way usage. I mean you've got to pay ~$20 for a dumb switch when you can buy a mechanical dumb switch for $2-3.