Woodstock D2796 12-inch zwaluwstaartmal met aluminium sjabloon

Name: Woodstock D2796 12-inch zwaluwstaartmal met aluminium sjabloon
Brand: Woodstock
SKU: 769433027960
Price: 235.67 EUR
Availability: InStock

Brand:Woodstock

2.7/5

€
235.67

Onze zwaluwstaartmal met uniek klemsysteem met cam-actie vergrendelt snel twee planken in positie om zowel staarten als pennen te snijden met één beweging van de router. Het verwerkt gemakkelijk materiaal van 1/2 tot 1-1/4 dik in breedtes tot 12. We bieden grote, gemakkelijk verstelbare knoppen in plaats van de vleugelmoeren die op andere mallen te vinden zijn. Eenvoudig op te zetten, deze stevige, goed gemaakte mal maakt 1/2 halfblinde zwaluwstaartverbindingen, het kenmerk van hoogwaardige ladeconstructie. De productie van zwaar gevormd staal zorgt voor nauwkeurigheid en duurzaamheid. De zwaluwstaartmal wordt geleverd met een 1/2 aluminium sjabloon en volledige instructies. Mal en sjabloon zijn verpakt in een full-color UPC-gecodeerde displaydoos. Router vereist een 7/16 geleidebus (hieronder vermeld) en 1/2 14 zwaluwstaartfreesbit (DC1069 of vergelijkbaar) met 1/4 schacht wordt apart verkocht.Specificaties:12 brede capaciteit 1/2 - 1-1/4 voorraadcapaciteit maakt 1/2 halfblinde zwaluwstaarten. 1/2 aluminium sjabloon inbegrepen Cam-Action klemsysteem

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 769433027960

Categorieën Tools & Home Improvement, Power & Hand Tools, Krachtgereedschap Onderdelen & Accessoires, mal accessoires,

Deze stevige, goed gemaakte mal is eenvoudig op te zetten en maakt 1/2-inch halfblinde zwaluwstaartverbindingen, het kenmerk van hoogwaardige ladeconstructie. Wordt geleverd met een 1/2-inch aluminium sjabloon. Router vereist een 7/16-inch geleidebus en een 1/2-inch 14-graden zwaluwstaartfrees met 1/2-inch schacht (apart verkrijgbaar).

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Woodstock
Brand	‎Woodstock
Country of Origin	‎China
Customer Reviews	3.6 3.6 out of 5 stars 182 ratings 3.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	0.98 x 0.98 x 4.02 inches
Item Dimensions LxWxH	‎0.98 x 0.98 x 4.02 inches
Item model number	‎D2796
Item Package Quantity	‎1
Item Weight	‎17.06 pounds
Manufacturer	‎WOODSTOCK
Material	Aluminum, Alloy Steel
Material	‎Aluminum, Alloy Steel
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎D2796
Product Dimensions	‎0.98 x 0.98 x 4.02 inches
Style	Modern
Style	‎Modern
Target Species	‎Dovetail

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Jim hasty

Excelllt jig.

I set this up following the instructions. An excellent dovetail jig. Cuts perfect blind dovetails.

Scritto da: PA DIY

Good joints after fixing clamping issue

This company definitely has quality control or design issues. I couldn't get a tight clamp on the fence or template (plastic knobs) so disassembled it. This issue seems to be a reoccurring theme in the reviews but is easily fixed. I found the t-nut heads all stick up above the slotted bracket (item 11). See my photo. T-nut slotted section height is 0.113 in and the slotted bracket is 0.098 in thick. It's impossible to develop any clamping force because you're clamping the t-nut to the knob threads, not bearing the t-nut face against the slotted bracket. I filled down the head of the t-nuts (slotted end) until I had a 1/32 clearance between the head of the nut and bracket. Took about 20 minutes to do all 4. Plastic knobs secure after 1/4 past snug after filing the nuts. Side stops (items 13) have the same issue but are able to clamp if you really crank on them. I'll file them down later on. I cut 6 practice joints from scrap wood tonight testing it out and built a small box. I'd never cut dovetails before. I was meticulous with my setup and the joints went together without any issues. Setup is reasonably quick once you do it once a few times. I recommend this but beware of may take some creativity and effort to figure out. You're cutting dovetails so don't expect to just magically do it without some effort and thought. I didn't want to try the HF clone because they've bit me a few with junk. This is good for hobby woodworkers like me.

Scritto da: killenjoke

good product, reasonable price.

Bought used, reported having cosmetic damage, no damage whatsoever. Considering the condition of the box ut was a pleasant surprise. Its solid My only issue with the product is that there are two sets of knobs on the top rail that conflict with each other making them hard to adjust. Easily fixed by adding a spacer to the top set of knobs or replacing them with a set of knobs that have a longer neck or replacing the lower knobs with some that have a lower profile. It's also a bit complicated to initially set up for each project, but it has a lot of useful features as a result, like an adjustable tail stop for your router.

Scritto da: Michael Thompson

Woodstock dovetail jig

This jig is ok. I had to take the knobs and bolts, that clamp the jig to the top of the board, and replace them. The knob is just pressed over the top of the bolt. I just used a die to cut new threads on the end. Other than those holders being junk this works just fine. If they would of just spent a few bucks more to get better knobs this would of been great right out of the box and I would of given it a 5 star rating.

Scritto da: Stephen Wilson-Floyd

Woodstock, please improve this!

I almost never write reviews of products. I was impressed that Woodstock (aka Shopfox) used the criticism of replacing the plastic template with the aluminum one recommended by several consumers. When I bought one, I was non-plussed by the fact that it did not include a router bit as advertised. Playing with it to understand its function, I noticed that knob settings conflicted with one another. At a limit, one knob ran into another. The 2 two adjustments that extend for the width of the horizontal piece bind at the greatest width due to no spacer. A spacer would keep it aligned (that's a tough fix due to the squared nut that keeps it in a track). Still tempted to keep it, I took it apart to lube parts thinking I could live with it. It was very difficult to put back together because of obstructed nuts. If you are to the point of appreciating dovetails, then you will recognize a poor design. I applaud Woodstock for its price, but this is a case where you get what you pay for. Woodstock, please continue in the spirit consumer satisfaction and improve this!

Scritto da: sergio

DOVETAIL JIG D2796

HARBOR FREIGHT HAS THIS SAME TOOL BUT AT 32 BUCKS!!! HAVE NOT HAD GOOD LUCK SO FAR, JOINTS DON'T SEEM TO FIT PEOPERTLY. HAVE TO MAKE MORE ADJUSTMENTS I THINK. PRODUCT IS SOLID AND WORTH THE MONEY, LOOKED AT HARBOR FREIGHT'S COPY AND IT SEEMS TO BE MISSING PARTS. SOME ADVISE: PLEASE INDICATE THAT YOU WILL HAVE TO PURCHASE A GUIDE TEMPLATE AND GUIDE BUSHING FOR THIS PRODUCT TO WORK PROPERTLY, THANKS

Scritto da: dferron

Poor Quality

This is a poor quality jig. I had to file a washers so that they would lay flat. I am an experienced woodworker and this unit does not belong in my shop. Setup is fairly easy. You will need a place to permanently mount. The jig setting guide is NOT accurate. I even calipered my wood to be sure of measuring accuracy. IF I purchase another dovetail jig, I will definitely purchase another brand. The company would not honor the warranty, but Amazon was kind enough to accept a return. I lost about $10, but was willing to do that to get it out of my shop.

Scritto da: Rita

Dovetail Jig with Aluminum

orderd the Dovetail Jig with Aluminum on tuesday feb. 15 2011 and got it today feb.18 2011 very fast to receive it (sooner then they said lol which was estimated: February 22, 2011 - February 28, 2011 ) husband likes it have not tried it yet but it looks very nice but will up date after he uses it Oh and doesnt look cheaply made.

Scritto da: Kdream

Producto de pésima cálidad

Escojo está calificación ya que el producto no cumple con mis expectativas, el manual no viene en español, pero lo principal es que la plantilla dice que es de 1/2", pero cuando lo quise trabajar con una guía de 1/2" esta no entraba en la plantilla, muestro la foto para que vean cual es la medida real de la plantilla. Hecha en China

Scritto da: Tyler

Wrong parts, poorly assembled

The template lock knobs are too tall, thus making it impossible to properly tighten the tension knobs. It's easily resolved by adding some washers to the tension knobs, but it really shouldn't be necessary. The top tension handle was also installed backwards, thus the cams wouldn't engage. I blame poor assembly for the wrong parts and backwards installation.

Scritto da: Kevin Yovdoshuk

Good Quality At A Fair Price For The Budget Minded Woodsmith

I couldn't wait to use it, once it was delivered. Out of the box, this jig was mostly assembled, I had to tighten some of the bolts, but other then that it wasmostly assembled. After 2 hours of dovetail cutting & assembly of the lumber modified, all of the joints were easily assembled, first was a dry fit, the second time was for glue up & both processes were painless & precise. A bushing set that is recommended from the same company worked flawlessly, provided that the user is employing high quality router bits. For perfect joints, the jig is just the guide, it's the bits that will determine the final quality of the resulting joints. I am using Freud 1/2" 14 degree dovetail bits, the results were flawless, the jig is very easy to use & set-up. I was cutting perfect joints 10 minutes after I unboxed this jig. With an expansive line of accessories, this jig can cut many different sized dovetail & box joints. If you don't cut dovetails every day, this modestly priced jig is a great investment. Don't let the price fool you, the quality of this product is very high. I have already ordered 2 box joint & 3 dovetail plates to expand the system & the thicknesses of the lumber used. For the woodworker who will use a dovetail jig sparingly, or is on a tight budget, this is a great jig to have in the shop. It will perform as expected. Just make sure you are using high quality router bits when making dovetail joints. While you may save a few bucks buying cheap router bits, the low quality bits will clearly show through the finished joints. I will only ever use Freud router bits when making dovetil joints. When a cheap bit fails right out of the box or is poorly built, it can cost a lot of money in expensive lumber when you have to replace the boards because of poorly fitting joints. A 4.5 out of 5 in my books.

Scritto da: Peter Milner

Product Unusable

We purchased this Jig and when our customer went to use it, it was unusable. One of the Threaded Holes was Tapped on an angle and therefore, the Jig was unusable. We had to re-drill and Re-Tap (Thread) the hole so we could use it. I am providing an honest and transparent product review. My recommendation to consumers is to check the functionality of these products thoroughly before the 30-day return window.

Scritto da: Joseph Glynn

this isn't a very good idea on plastic knobs

Description is WRONG. It says you need 7/16 guide bushing AND 1/2 shank bit . How is a 1/2 inch shank going to fit thru a 7/16 guide bushing. Answer it isn't. You need a 1/4 in shank. Unit came with numerous screws that were loose and fell out when I pulled it out of the box, a couple of the knobs even fell out. No way to hand tighten the two outer knobs at the back that hold the fingers in place. I had to use a vice grips to tighten them enough to hold, this isn't a very good idea on plastic knobs. Whoever did QA on this unit wasn't doing a very good job.