ALLWAY CS6 Soft-Grip Contourschraperset met 6 mesjes en mesvijl RVS

Brand:ALLWAY

3.6/5

45.11

PRODUCTBESCHRIJVING De Allway Tools Soft Grip Contour Scraper Set heeft 6 verwisselbare roestvrijstalen mesjes voor het werken op verschillende vlakke en gebogen oppervlakken. Dit gereedschap heeft een ingebouwde vijl voor het slijpen van de messen en bevat een handige mesopbergtas. De softgrip handgreep is ergonomisch gebogen voor comfort. Bevat 6 bladen voor contourschrapen bij verftoepassingen: 1 blad voor concave en smalle voegen; 1 mes voor kleine platte en kleine concave vormen; 1 mes voor middelgrote en grote staven, deuvels en bolle lijsten en balusters; 1 mes voor plat werk en grote concave lijsten, kroonlijsten en stoelrails; 1 mes voor scherpe ingesprongen lijsten en concave lijsten, pilasters en mantels; en 1 mes voor rond lijstwerk, houten gordijnroedes, deur- en raamkozijnen. VAN DE FABRIKANT Deze softgrip contourschraperset bevat een softgrip handgreep en 6 geharde en geslepen roestvrijstalen verschillende contourmessen. Halfronde bladvijl in het handvat. Verkrijgbaar in handige opbergkoffer. Wordt geleverd in een gekaard pakket.

Ideaal voor lijstwerk, openingen, staven, balusters en meer. Gemakkelijk om een ​​van de meegeleverde mesjes te vervangen. Opbergkoffer voor messen inbegrepen. Houd mesranden scherp met de meegeleverde mesvijl die handig in de schraperhandgreep kan worden opgeborgen. Contourschraper bevat 6 roestvrijstalen messen voor verschillende klussen.
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 1,154 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎....
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎CS6
Item Package Quantity ‎1
Item Weight ‎8.8 ounces
Manufacturer ‎Allway Tools Inc.
Material ‎Stainless Steel
Part Number ‎CS6
Product Dimensions ‎1.5 x 5.75 x 10.25 inches
Special Features ‎Durable and reliable construction

3.6

12 Review
5 Star
72
4 Star
18
3 Star
7
2 Star
2
1 Star
2

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Lori Haddad Fusco
It comes with a sharpener
These blades are AMAZING! I was able to Scrape a small table with rounded legs in about 30 minutes. It comes with blades for every shape you can imagine. I have tried other blades and this is absolutely the best scraper I have ever ever ever used! And the best part, is, I can sharpen my tools, and it works like it’s new again..
Scritto da: leo roth
To ✅️ hold this tool ???? and maneuvers like a whistle
Awsome product ???? so handy and sturdy a pleasant surprise
Scritto da: DioMio
Great scraping tools, super perfect
All I can say is that this tool saved me tons of time on my projects. I never found anything that couldn't be scraped, so if you need to scrape very much you'll want this. Even my wife loves it.
Scritto da: Colin M.
Not sharp out of the box - not a problem.
These have a rough finish out of the box, but getting a knife edge is 1.) not super necessary unless you really are going for that hand-scraped finish and 2.) adds a TON to the cost. But this tool comes with a magnetically held fine cut file in the handle. It's roughly finished too, but it works perfectly. The steel on the irons is good, but not great. It does need regular touching up, more than a carbide scraper (obviously) but this is 1.) far more reusable, and 2.) can be finely set to whatever you want to do. I can use the file to put a nice hooked burr on the edge for heavy paint/finish removal (I have been using it to strip heavy, dense paint from an ikea chair) and then put it to a stone and strop for a fine edge that doesn't last very long, but will leave a lovely hand-scraped fine cut finish. It's honestly a lot like a cabinet scraper but easier to use and a little more versatile. I have precisely three gripes, all minor. 1.) there's no "flat" edge. One is close, but it's still ground like a scrub plane blade. This isn't hard to fix, within a few sharpenings on the file, you can square up that edge and just leave the corners rounded so it doesn't create stripes like the carbide scraper does. 2.) The included file works to undo the screw holding the blade in, but only just. It doesn't feel very nice to use, though works fine. They should grind the tail of the file into a screwdriver flat (it's what I did) 3.) the screw holding the blade is JUST too big to slip the blade over. This would have made quick-changing blades far, far easier, but it's just a HAIR too big. I might file it down eventually, but if they made it about 1/16th of an inch narrower in diameter, it wouldn't have affected performance negatively, and would let you change blades only by loosening the screw, rather than removing it. Again, all of these are minor. This thing is a godsend tool. I like having both a carbide scraper with disposable blades and this, but push to shove, I reach for this one five times as often for the finer detail furniture work I do. This set to a heavy cut and a card scraper set to a fine cut are basically the only things you need for furniture refinishing.
Scritto da: Tmcbroom
Works and worth it
I used this to get to the small spots to remove old paint .. it worked great.. you must try a practice spot first , until you get used to how to handle it ..
Scritto da: Dawn
Dulls quickly
Great tool. Just gets dull pretty quickly. Had to sharpen multiple times .
Scritto da: Andrew
Most blades work but the handle needs a design fix
The pointed blade as you can see in the picture does not quite fit on the handle properly leaving you only to be able to scrape with a very tip of it. If you see the blade in my picture, it's sharp all the way around like they intended for it to be used all the way around, but the handle shape prevents that. They could have also made the file usable as a screwdriver to change blades, but that's rounded all the way over so it's hard to get a bite on the screw.
Scritto da: Mr. PG
Problem solved
I was give a couple of very old (almost heritage) solid wood doors to re-purpose for our cabin project. I was stripping them (haven't done much of that, so rank amateur) and it was difficult using conventional, paint-store scrapers. This product solved ALL of the problems. Changing blades quickly and easily allowed me to fine-scrape coves and beads and ornate work. The doors came out beautifully. Well worth the $$$ spent.
Scritto da: Lindy Skutnik
Nice assortment of attachments
Excellent for scraping old paint from grooves etc.
Scritto da: Andrew
I am restoring an old Church Steeple built in 1907 and it really helps with the detail work.
Super sharp stainless steel blades and has a built in file to keep them sharp plus you can not loose the file. As well the blades fit in a case so you do not loose them either. Quality and well thought out!
Scritto da: Martin
Good stuff
Helps a lot with weird shapes
Scritto da: Robert Benoit
Good tool for the money
12 different profiles suit just about any need I have. It's sped up my restorations considerably. Good solid steel, keeps and edge. No complaints.

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array