0
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister

Anderson Metals - 07046-0812 Messing Tuinslang Draaifitting, Connector, 1/2 Barb x 3/4 Female Slang 1/2 Barb x 3/4 GHT Female Slang

Brand:Anderson Metals

3.6/5

€
27.19

Deze Anderson Metals draaibare tuinslang connector is gemaakt van messing en verbindt de slang met een mannelijke GHT connector. Deze koppeling heeft vrouwelijke tuinslangschroefdraden (GHT) voor aansluiting op een mannelijke GHT-connector. De van weerhaken voorziene steel zorgt voor een goede afsluiting van een flexibele of halfstijve slang bij gebruik met een slangklem of krimpmof of ferrule (niet inbegrepen). Deze connector is gemaakt van messing voor corrosiebestendigheid, ductiliteit bij hoge temperaturen en lage magnetische permeabiliteit. Slangfittingen verbinden, regelen, veranderen de richting van en beëindigen de stroom in leidingen en slangsystemen. Ze zijn gemaakt van messing, roestvrij staal, gegalvaniseerd staal en andere materialen die bestand zijn tegen corrosie, druk en slijtage. Slangkoppelingen hebben verschillende soorten aansluitingen, waaronder schroefdraad, weerhaken, push-to-connect, dry disconnect en andere, waaronder die op basis van internationaal aanvaarde specificaties. Slangkoppelingen worden gebruikt in systemen zoals luchtcompressoren, automatische productieprocessen, vliegtuigbesturingen en bandeninstallatie in industrieën zoals landbouw, mijnbouw, wegenbouw, brandbestrijding en luchtvaart. Anderson Metals produceert messing fittingen, kleppen en pijpnippels. Het bedrijf, opgericht in 1951, heeft zijn hoofdkantoor in Kansas City, MO.

Hoeveelheid
Voeg toe aan winkelkarKoop nu

EAN: 0719852118527

Categorieën Industrieel & Wetenschappelijk, Hydraulics, Pneumatics & Plumbing, Fittings, Slangfittingen, Barbed Fittings,

Deze fittingen bevatten lood en mogen volgens de federale wetgeving niet worden geïnstalleerd voor drinkwatergebruik in de VS en zijn territoria. Messing voor corrosieweerstand, ductiliteit bij hoge temperaturen en lage magnetische permeabiliteit. Wordt aan de ene kant aangesloten op een slang en aan de andere kant op een mannelijke GHT-schroefdraadaansluiting. Adapter voor het aansluiten van slangen of fittingen van verschillende typen.
Brand Anderson Metals
Color Brass
Connector Type Nipple
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 2 x 1 x 1 inches
Item model number 07046-0812
Manufacturer Anderson Metals
Material Brass
Number of Pieces 1
Product Dimensions 2 x 1 x 1 inches; 1.45 Ounces
Size 1/2" Barb x 3/4" GHT Female Hose
Thread Type GHT

3.6

13 Review
5 Star
75
4 Star
15
3 Star
4
2 Star
2
1 Star
5

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: kaitlyn
Doesn't fit 1/2 pex
This is a good fitting, fits 1/2 hose, not 1/2 pex just an FYI
Scritto da: Natalia
Wort Chiller? You need this
As others have stated, the gasket is not included. I just stole the one from my garden hose and replaced when I was done. I bought this to create a no solder wort chiller and it worked very well. I slipped two clamps onto the clear vinyl tubing, slid the tubing onto this adapter and screwed down the clamps. It created a water tight seal around the vinyl tubing good enough for the pressures used in cooling wort (the grain and hops steeped water used to make beer). However there was a small leak (dripping) where this fitting connected to my hose to faucet adapter. The dripping wasn't a concern for me since it was minimal and over the sink. If you need a completely watertight seal, don't get this fitting. I suggest one that doesn't swivel. Here's what you need to make your own wort chiller. 3/8" barb to 3/4" female hose fitting. This one is fine and is currently the cheapest on Amazon. They are $9 at my local hardware store. Hose Clamp - A 10 pack is sufficient. You can buy these for about $0.90 each at the hardware store but I ended up using 8, so I'm glad I got the 10 pack. These are quality stainless clasps. 2xWatts SVIG10 Pre-Cut 1/2-Inch Diameter by 3/8-Inch Clear Vinyl Tubing, 10-Foot Length - I bought two because my stove is 6 ft from my sink faucet. If your sink and stove are closer, you might be able to just cut one in half. However, make sure you are measuring to the top of your pot and leaving some wiggle room. You don't want your plastic tubing to be pinched. Mueller/ B&K UT06025 General-Purpose Utility Grade Copper Tubing Coil This is the most expensive part. Be very careful when bending, and always use the tube bender. If it gets kinked and you try to unbend it, it will create a hole and you'll need a new copper tube. General Tools 100-3/8 Tubing Bender for 3/8" Tube Size (OD) - You can't make it without this, you'll kink and ruin your copper tubing. LDR 500 2050 Aerator Adapter, Faucet to Hose to Aerator - or any faucet to hose adapter. I happened to already have one that I picked up from the hardware store for about $3 a while back. If you get the dual thread kind, you don't have to worry about sizing. However, most US faucets are 15/16" try that first if you aren't sure, or remove your aerator and measure. I purchased most of these items from Deerso and the brass fitting from Amazon. The total came to $46.05 excluding the faucet adapter, which I already owned. You can buy a wort chiller with tubing and this garden to 3/8" tubing adapter for about $50, but you may have to add more clamps. I needed two clamps on each hose connection on mine. In the end I decided to make my own and I got a nice wort chiller perfectly sized for my pot at the exact depth I wanted and the hose connections external to the pot in case of drips. However, if you don't have the time or interest, buying a wort chiller pre-made isn't that much more expensive than the parts. Just make sure any wort chiller you purchase includes the vinyl tubing and this adapter. They are a significant portion of the total cost.
Scritto da: Scott Z.
perfect
Thank you! Its perfect and goes on like a spray hose nozzle
Scritto da: Richborn1972
Nice fitting but will not work with pex pipe
Bought this to use with my dehumidifier was gona use pex to discharge the water unfortunately the pex pipe will not fit I used non expansion pex would probably work with the expanding pex
Scritto da: Emale
Solid Brass - a lifetime buy.
These are solid brass and will, I believe, last me the rest of my life. I compare these brass fixtures to aluminum repair parts that I had bought at Home Depot last October (2014). I did not like aluminum but HD no longer carried brass. Silly me: I should have waited and searched to buy brass fittings on Amazon instead of the aluminum ones (which were not low cost too boot). Well, from last October to the following March, the aluminum fittings had corroded and essentially "welded" themselves to my brass hose bibs and good thing I checked and removed them when I did as it was very difficult to get them off after only a few months. I checked and sure enough the same sort of thing happened with EVERY aluminum fitting I had bought, including hose repair parts AND quick disconnect couplings that I had on 6 different hoses !!! The aluminum fitting (a few months old) were all removed and GIVEN away (to charity). Here's what happened: the dissimilar metals involved (i.e. the aluminum fixtures and the brass hose parts) when situated in a conductive medium (hard water) created a "galvanic" effect where molecules from one metal type (aluminum) migrated to the other metal - brass, just like a metal plating process. The effect of the molecular migration was to pit and corrode the aluminum parts which became "welded" to the brass parts. The only way to avoid this sort of thing is to use metals of similar nature. A scale known as the Electromotive Series ranks the electrical "distance" of metal chemistry and those that are distant from each other on the scale, have an electrical potential difference that facilitates the galvanic plating mentioned above. By using brass against brass, (instead of aluminum against brass) the electrical distance is brought close to zero and so no plating effect will occur. You know, there is an old saying I heard once and it has stuck with me over the years. I don't know who to credit but it goes something like this: "The bitterness of poor quality remains long after the sweetness of low price is forgotten." These solid brass fixtures may cost a little more but finding them on a store shelf has become more difficult. If I had bought brass to begin with, I would not have wasted what I spent on the aluminum fittings. I feel I will not need to replace these brass items probably for the rest of my life. Yes you WILL need to supply your own 2 cent washer, and yes the outer ring is knurled (not hexagonal) but you may never have to replace the solid brass fixtures again. I would suggest applying a small amount of appropriate lubricant when you assemble these to other (brass) parts, and live happily ever after.
Scritto da: MarkPrimo
Does not work with 1/2" PEX
I was looking for this part to change over to 1/2" PEX. I don't understand why it is so hard to find this part for PEX.
Scritto da: WRL
This is not for garden hoses! Be careful you really want 3/8"
I can't really speak to the quality of the part, so I gave it 4 stars. But there are pictures of garden hoses being repaired in the reviews--those are for 5/8", not 3/8". This is for small tubing. (But I didn't figure that out during the return window.) So I paid a premium for something I can't use. But it's my own fault I didn't check them when they were received.
Scritto da: Mary
Not quite the OD barbed portion of poly coupling of same size
Worked fine for my temporary needs but leaked a bit without extremely tight clamping. It doesn't look like the barbed section O.D. is as big as a poly coupling of the same size.
Scritto da: DeeB.
Not worth 10 cents
Don't waste your money. If I could have given zero stars, I would have. I've used repair kits many times, and never had an issue. Five minute repair, snug everything down, and you're good to go. With the lockdown I didn't have the option to go into an actual hardware store, so settled for ordering this. I should have waited. This thing leaks everywhere. If you'd like a shower while you try and turn the hose on, then this is for you. Otherwise give it a hard pass. It's especially bad at the bottom of the swivel. Nothing you do will stop it from spraying anywhere. Not teflon tape, not better washers, not silicone paste. I can't return it, because the silicone paste (my last resort to stop the leaking) is all over it. It's gone in the garbage, where it belongs. Today I went to the hardware store, got a quick release unit for $5 less, and had the repair done in less than 5 minutes, which is how it should be.
Scritto da: Amazon Customer
Works great
The item works great used it to clear flush out my heater core.
Scritto da: gary fidalgo
Excellent
Excellent
Scritto da: Darren H.
It fits 5/8 hose good enough
Dang thing leaks…tried two different gaskets still leaks. Maybe my male hose end had something to do with it…don’t know, didn’t try another hose because I was ‘ticked-off’ and the male hose end I was using has never leaked on any other fitting, so can’t say for sure why it leaked so darn bad! Disappointed to say the least!
Scritto da: Brian
Not What I Thought but Works Great
I definitely thought this had a Pex barb on it... It does not. That's my fault. Lucky I had some of the appropriate tubing and a ziptie. This is only for occasional use so it should be perfect

Gerelateerde producten

hot
MettleAir 123PP-4 polypropyleen kunststof 1/4 binnendiameter slangpilaar T-verbindingsstuk kruising/splitsing (10 stuks)
4.1/5

€ 40.71

MettleAir 123PP-4 polypropyleen kunststof 1/4 binnendiameter slangpilaar T-verbindingsstuk kruising/splitsing (10 stuks)
4.1/5

€ 40.71

hot
Anderson Metals - 07046-0812 Messing Tuinslang Draaifitting, Connector, 1/2 Barb x 3/4 Female Slang 1/2 Barb x 3/4 GHT Female Slang
3.6/5

€ 27.19

Anderson Metals - 07046-0812 Messing Tuinslang Draaifitting, Connector, 1/2 Barb x 3/4 Female Slang 1/2 Barb x 3/4 GHT Female Slang
3.6/5

€ 27.19

hot
Dixon RDM21 RVS 316 Schacht/Water Fitting, Mender, 1-1/2 Slang ID Prikkeldraad, 4 Lengte
3.1/5

€ 63.90

Dixon RDM21 RVS 316 Schacht/Water Fitting, Mender, 1-1/2 Slang ID Prikkeldraad, 4 Lengte
3.1/5

€ 63.90

hot
Anderson Metals - 57001-1616 messing slangkoppeling, connector, 1 weerhaak x 1 mannelijke buis 1 weerhaak x 1 NPT mannelijke
3.7/5

€ 36.17

Anderson Metals - 57001-1616 messing slangkoppeling, connector, 1 weerhaak x 1 mannelijke buis 1 weerhaak x 1 NPT mannelijke
3.7/5

€ 36.17

hot
Anderson Metals - 07210-0808 messing push-on draaibare slangfitting, connector, 1/2 weerhaak x 1/2 dubbele zitting flare
2.1/5

€ 25.19

Anderson Metals - 07210-0808 messing push-on draaibare slangfitting, connector, 1/2 weerhaak x 1/2 dubbele zitting flare
2.1/5

€ 25.19

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array

Totaal:€ 0.00

Zie winkelwagenUitchecken

Categorieën

Alle categorieën
Menu Categorieën In de buurt van Winkelwagen

Menu