Attwood 11090-3 bandendrager in U-boutstijl, aanhangwagentong of framemontage, past op velgen met 4 of 5 nokkengaten, houdt 8-15-inch banden vast

Brand:attwood

3.6/5

38.64

Deze Attwood U-Bolt Style Tyre Carrier maakt het gemakkelijk en handig om een ​​reservewiel aan een dissel of frame van een aanhanger te bevestigen. Deze vierkant gebogen U-bout heeft beugels met schroefdraad die aan elkaar vergrendeld kunnen worden (hangslot niet inbegrepen). De U-bout is van stevig en duurzaam verzinkt staal. De tong of het frame van de aanhangwagen moet tussen 2 inch x 2 inch vierkant en 3 ½ inch x 4 inch rechthoekig zijn. Deze drager is geschikt voor velgen met 4 of 5 nokkengaten en met zijn extra lange schacht van 8 ½ inch kan hij banden van 8 inch tot 15 inch bevatten. Attwood Corporation is al meer dan 100 jaar een bekroonde leider op het gebied van engineering, testen en productie van maritieme producten van de hoogste kwaliteit. Wij leveren veilige en betrouwbare verlichting, brandstofsystemen, watersystemen, stoelen en sokkels, zwemladders, op maat gemaakte bekleding en algemene maritieme accessoires die eenvoudig te installeren zijn en voldoen aan de regelgeving.

EAN: 0022697001436

Categorieën Home & Garden, Tiers, Spare Tire Tire Tires Bagagedragers,

Tong of frame moet tussen 2 inch in het vierkant en 3 ½ inch x 4 inch rechthoekig zijn. Geschikt voor velgen met 4 of 5 nokkengaten. Extra lange 8 ½-inch schacht kan 8-inch tot 15-inch banden bevatten. U-bout is stevig en duurzaam verzinkt staal. Beugels kunnen aan elkaar worden vergrendeld (hangslot niet inbegrepen). U-bout met vierkante bocht heeft beugels met schroefdraad. Een gemakkelijke en handige manier om een ​​reservewiel aan een dissel of frame van een aanhanger te bevestigen.
Brand ‎Attwood
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 1,421 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎11090-3
Item Weight ‎14.4 ounces
Manufacturer ‎Attwood
Manufacturer Part Number ‎11090-3
Model ‎Attwood Boating Tools
Product Dimensions ‎0.87 x 5.75 x 13.75 inches

3.6

11 Review
5 Star
72
4 Star
17
3 Star
6
2 Star
3
1 Star
2

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: D Dorsey
Fits fine and easy to install
A quality mounting kit to attach spare tire to boat trailer. I added a lock for extra security. I'd buy it again and would recommend this to family and friends. I did cut the threaded ends off about 3" per side on the U bolt just to make sure the boat can't touch them when loading. A nice, clean setup.
Scritto da: Bobcat
Great Price and Solution
Holds my spare tire for the trailer just right. I can even lock it down if needed. Great quality product for the price.
Scritto da: Nathan Currie
It worked
I needed a way to secure my spare tire to my utility trailer. I wrapped this U-Bolt around the tongue so the tire is on top. Put a padlock on it and I am good to go. The tire is secure and someone is going to need bolt cutters if they want to steal it.
Scritto da: Keith Watts
Easy to install and solid.
Easy to install and solid.
Scritto da: Ben Berauer
Inexpensive but modestly secure solution for carrying your spare trailer tire.
This tire carrier is basic and inexpensive. If basic function is all you are concerned with and maximum security is not a huge concern this is a fine option. If security is a concern this is probably not the best solution for you. You can secure the tire with a decent lock, but the unit itself can be cut fairly easily.
Scritto da: Deer Hunter
Side Mount would be easier with two people
Mounting the spare tire on the side of the trailer tongue is a bit of a pain with only one person. I'll probably tack weld it so I don't have to support the tire, hold it in place, and screw on the latches all at the same time. I like the ability to padlock the latches. It will keep them from loosening as well as keep the spare from getting stolen.
Scritto da: David Mosby
Get the right width!
The first one of these I bought was too short in width. This one was the right width. The only negative is that the bolt part was not as thick and strong. The other one also came with lug nuts which also helped with strength. The smaller screw on locks could strip out so I am buying some nuts and will probably attach with JB Weld.
Scritto da: Amazon Customer
Easy to install, does the job!
Works great for my needs. Currently using a bolt and nut with washers until I buy a lock. Things I didn’t know when buying that could be helpful: This does not come with any nuts to screw it down. It works by tightening down each bracket by hand until snug, then you overlap them to make the hole you put a lock through (or bolt/nut in my case).
Scritto da: Adam
Gets the job done
The lock opening could be larger but it fits and seems secure.
Scritto da: Philippe
Work well
No worries.
Scritto da: Michael
Not a good fit or value
This unit is very simple for what you pay for but more importantly its about 1/4 inch short of my trailer rail so it widens once bolted and then doesnt fit the tire holes. Not happy

Gerelateerde producten

hot
Camco Eaz-Lift Reservewiel Bevestiging
3.6/5

€ 94.85

Camco Eaz-Lift Reservewiel Bevestiging
3.6/5

€ 94.85

hot

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array