0
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister

Brown & Sharpe 599-579-12-5-1 schuifmaat met wijzerplaat, roestvrij staal, zwarte wijzerplaat, 0-12 bereik, +/-0,001 nauwkeurigheid, 0,001 resolutie, voldoet aan DIN 862 specificaties 12 inch zwart

Brand:TESA Brown & Sharpe

3.6/5

€
678.99

Hoeken van kunststof schermframes ontworpen om te passen in vierkant gesneden uiteinden van 5/16 wit aluminium schermframemateriaal om schermen met aluminium frame te repareren of te bouwen. Rechthoekige montage elimineert de noodzaak van verstekzagen, wat zorgt voor een eenvoudigere frameconstructie door de huiseigenaar.

Geen eenheden beschikbaar

EAN: 0622419275918

Categorieën Industrieel & Wetenschappelijk, Test, Measure & Inspect, Dimensionale Measurement, Calipers, Digital Calipers,

Lineaire nauwkeurigheid voldoet aan DIN 862-normen. Het afgedekte rek voorkomt dat vreemde voorwerpen de uitrusting verstoppen, om meetfouten te helpen voorkomen. Draaibare wijzerplaat met een diameter van 1,25 heeft een borgschroef om de glijdende bek op zijn plaats te houden, om consistente metingen te garanderen. Constructie van gehard roestvrij staal voor corrosiebestendigheid en een lange levensduur. Nauwkeurige wijzerplaatverdeling van 0,001, met één omwenteling gelijk aan 0,100.
Brand TESA Brown & Sharpe
Country of Origin Switzerland
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number 599-579-12-5-1
Manufacturer Hexagon Metrology
Material Stainless Steel
Measurement Accuracy +/-0.001"
Power Source Battery Powered
Product Dimensions 17 x 5.5 x 1.5 inches; 2 Pounds
Range 0-12"

3.6

8 Review
5 Star
79
4 Star
11
3 Star
2
2 Star
2
1 Star
6

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Lincoln C.
Calipers
The calipers arrived on time as promised. They seem to be a good quality caliper, but the question still remains. Where were they made???? Hopefully they hold up! Time will tell!
Scritto da: Edward
AMAZING!
Didn’t think I was going to find calipers that were the quality of tools made as good as my father’s. Very impressed. To own well made tools that are precise, accurate, and last you need to spend some money. I feel that I got a great tool and didn’t spend that much money.
Scritto da: gpdno
Best made all-around
The B&S calipers are the best made calipers I've found. I dial is super easy to read and you never have to worry about a dead battery :)
Scritto da: J. Daz
Great caliper, less than great case for the MSRP
Bottom line up top; Great caliper that could use a better padded case. Nothing a hot glue gun and some scrap foam can't fix. I use my Brown & Sharpe for many simple measurements around the workbench and it has given me consistent performance. I don't have the ability to double check the measurements with any advanced calibration equipment, but I feel confident with it's readings. The adjustment wheel is sturdy and doesn't slip, but it isn't stiff or hard to use. You could say it's just like Baby Bear's bed; it's just right. Had I spent full price for this dial caliper, I would have been a bit dismayed by their use of a flimsy plastic case with horrible latches that do not truly stay latched. Alas, I took the gamble, bought it used, and I feel like a bandit for the deal that I got (but let's just keep that between us).
Scritto da: Josue Tapia-Ramirez
Handle with more care next time please.
Very accurate, came fast and looks exactly like I would have bought from a Swift tools store except a little more cheaper price. However when I opened the box to see the dial face had already been cracked and close to a radius lenght, I wasn't impressed with the care that was taken before it got to my doorstep. Still a tool is a tool and I always keep checking the readings daily to make sure it's still true.
Scritto da: Darkwolfe
Precision Machinist Quality
I work as a precision machinist on various US/Monarch lathe's & Bridgeport/Cincinnati millers all day, every day. Fowler & SPI are fine for basic measuring but I needed something more accurate for my close-tolerance work. These calipers measure almost perfectly, or at least within .001. Some other calipers lose accuracy as they measure out to the 6" mark but I haven't noticed that with these, they still hold .002 easily. The black face is personal choice, but I find it resists oil tarnishing that happens to some white faces over several years. The only downside is the lack of a thumb roller. But they do have a raised/barbed section on there that works just as well, and the carriage slides easily enough (though not too easily). I have found that I got used to the design quickly and easily. My Brown & Sharpe micrometer has lasted me for more than 20 years so, if I'm careful I can see myself getting that out of these. Good quality, good accuracy even in a precision machine shop.
Scritto da: Caleb
Not Swiss made, and you can tell
These are not the brown and sharpes of yesteryear! They may have the same same model number, but they are nowhere near as smooth, and definitely not made in Switzerland anymore. The description listed Switzerland as the country of origin, but that is wrong! After doing some research it turns out that production of the non ISO rated calipers has moved to China. The real Swiss made ones now have a new model number. Being Swiss made is a huge deal for 2 reasons; they’re Much smoother, and much more accurate! I’m a professional machinist, I use calipers a hundred times per day. My Mitutoyo pair is great, but the old Brown and Sharpes always had an edge on smoothness. A coworker accidentally broke them so I wanted them replaced, but these were way worse then even the cheap Fowler’s. Bottom line, I do not recommend buying these! Source the Swiss ones instead!
Scritto da: RAB
Just like my old one which needs new gears!
Quality was very good!

Gerelateerde producten

hot
Mitutoyo 500-174-30 geavanceerde onsite sensor Absolute schaal digitale schuifmaat, 0-6 bereik
0.1/5

€ 433.16

Mitutoyo 500-174-30 geavanceerde onsite sensor Absolute schaal digitale schuifmaat, 0-6 bereik
0.1/5

€ 433.16

hot
Mitutoyo 572-311-10, Verticale Digimatic Schaaleenheid, 0 - 6 X .0005/0.01mm, Met Uitgang
3.1/5

€ 440.94

Mitutoyo 572-311-10, Verticale Digimatic Schaaleenheid, 0 - 6 X .0005/0.01mm, Met Uitgang
3.1/5

€ 440.94

hot
Mitutoyo 500-159-30 geavanceerde onsite sensor Absolute schaal digitale schuifmaat, 0-6 bereik
0.1/5

€ 454.25

Mitutoyo 500-159-30 geavanceerde onsite sensor Absolute schaal digitale schuifmaat, 0-6 bereik
0.1/5

€ 454.25

hot
INSIZE ISL-A5-450 lineaire schaal, 18/450 mm, resolutie 0,0002
0.1/5

€ 112.44

INSIZE ISL-A5-450 lineaire schaal, 18/450 mm, resolutie 0,0002
0.1/5

€ 112.44

hot
INSIZE ISL-A1-700 lineaire schaal, 28/700 mm, resolutie 0,00005
0.1/5

€ 1142.43

INSIZE ISL-A1-700 lineaire schaal, 28/700 mm, resolutie 0,00005
0.1/5

€ 1142.43

hot
INSIZE ISL-A1-50 lineaire schaal, 2/50 mm, resolutie 0,00005
0.1/5

€ 898.01

INSIZE ISL-A1-50 lineaire schaal, 2/50 mm, resolutie 0,00005
0.1/5

€ 898.01

hot
INSIZE ISL-A1-150 lineaire schaal, 6/150 mm, resolutie 0,00005
0.1/5

€ 926.78

INSIZE ISL-A1-150 lineaire schaal, 6/150 mm, resolutie 0,00005
0.1/5

€ 926.78

hot
Steelex D3723 4-inch messing remklauwen binnen/buiten
3.2/5

€ 27.83

Steelex D3723 4-inch messing remklauwen binnen/buiten
3.2/5

€ 27.83

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array

Totaal:€ 0.00

Zie winkelwagenUitchecken

Categorieën

Alle categorieën
Menu Categorieën In de buurt van Winkelwagen

Menu