CURT 56127 Voertuigzijde Custom 4-Pin Trailer Kabelboom, Past op Select Mitsubishi RVR, Outlander Sport, Lancer, Zwart

Brand:CURT

3.6/5

106.86

Indien uw voertuig niet voorzien is van bekabeling voor het trekken van een aanhanger, is CURT maatwerkbekabeling de ideale oplossing. Een op maat gemaakte kabelboom - ook wel een T-connector genoemd - is een eenvoudig, plug-and-play elektrisch apparaat dat wordt aangesloten op het elektrische systeem van uw auto en zorgt voor een standaard, universele aansluiting voor de bedrading van de aanhangwagen. Dit wordt gedaan met behulp van twee of meer voertuigspecifieke, OEM-compatibele connectoren die in het achterlicht worden gestoken, waardoor knippen, splitsen en solderen tijdens de installatie niet meer nodig is. Op maat gemaakte kabelbomen zijn voertuigspecifiek gemaakt en hoewel ze niet voor alle voertuigen beschikbaar zijn, bieden ze wel een van de snelste, gemakkelijkste en veiligste manieren om een ​​voertuig te bedraden om te slepen. Deze specifieke plug-in kabelboom biedt een 4-polige platte connectoraansluiting en is ontworpen als een aangepaste kabelboom voor bepaalde jaren van de Mitsubishi RVR, Outlander Sport en Lancer (zie toepassingsinformatie om de compatibiliteit van uw voertuig te controleren). Het wordt geleverd met alle benodigde bedradingscomponenten om een ​​betrouwbare aansluiting voor de bedrading van de aanhanger tot stand te brengen, evenals een stofkap om de connector schoon te houden wanneer deze niet in gebruik is. Je hebt een beeld in gedachten van je volgende bestemming -- misschien is het de aanlegsteiger van je favoriete visstek, misschien is het een camping die uitkijkt op een van de meesterwerken van de natuur, of misschien is het de volgende grote werklocatie. Om dat beeld werkelijkheid te laten worden, is echter meer nodig dan alleen dagdromen. Er is een solide verbinding en de juiste hoeveelheid stroom voor nodig. CURT-bedrading op maat is gemaakt met de meest geavanceerde technologie in de branche en is ontworpen om gemakkelijk te installeren, waardoor u een langdurige elektrische verbinding krijgt voor uw trekhaakopstelling.

EAN: 0612314561278

Categorieën Home & Garden, Tiers, Trekkeraccessoires, Wiring,

STOFKAP. Om langdurig gebruik en weersbestendigheid te bevorderen, wordt deze 4-polige kabelboom voor aanhangerverlichting geleverd met een rubberen stofkap. Hij past gemakkelijk op de 4-weg platte connector wanneer hij niet in gebruik is, en beschermt hem tegen de elementen buitenshuis. BETROUWBARE KRACHT. Deze 4-weg kabelboom voor aanhangers is gebouwd met technologie voor opbouwmontage. Dit type circuit genereert minder warmte, optimale lichtintensiteit en duurzame prestaties. VOERTUIGSPECIFIEK. Deze aftermarket-kabelboom voor voertuig-aanhangwagen is ontworpen voor geselecteerde jaren van de Mitsubishi RVR, Outlander Sport en Lancer. STANDAARD CONNECTOR. Deze plug-in 4-voudige aanhangerbedrading kan worden gebruikt voor het aansluiten van aanhangerachterlichten, remlichten en richtingaanwijzers. 4-weg bedrading voor aanhangwagenverlichting is populair op een verscheidenheid aan aanhangwagens, waardoor veelzijdige trekmogelijkheden voor uw voertuig worden toegevoegd. MAKKELIJK TE INSTALLEREN. Niet snijden! Geen splitsen! Deze kabelboomset voor een aanhangwagen kan worden aangesloten op de bestaande fabrieksbedrading van uw voertuig en is uitgerust met een standaard 4-pins aanhangwagenbedradingsconnector aan de achterkant voor het aansluiten en trekken van een aanhangwagen.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 142 ratings 4.5 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56127
Item Weight 1.73 Pounds
Item Weight ‎1.73 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56127
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56127
Product Dimensions ‎9 x 6 x 3 inches

3.6

13 Review
5 Star
71
4 Star
19
3 Star
4
2 Star
2
1 Star
4

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: john zawistoski
Watch car fit,
Was a good quality, but did not fit my car for the year made.
Scritto da: Daniel
Easy to Install!
Overall it’s an easy installation. however you will find running the cable to the battery a little tricky but not super hard if you are resourceful.
Scritto da: James Houghton
Mostly easy to install, except the 12V battery cable
I got this for a Mitsubishi Outlander Sport. The connections to the existing brake light connectors was easy and the instructions were very clear. Mounting the controller was also easy and it is nice that this kit comes with everything you need. The only weird thing was the battery connections wire. If I ran it through the passenger cabin from the trunk area to the front, there was no clear place to get a wire into the engine compartment without a lot of work. Fortunately I was able to poke it through a rubber grommet in the rear compartment and run it under the car to the battery. There were enough zip ties included to secure the cable from the rear to the front adequately, but I would recommend adding a few additional zip ties just to be sure. The controller worked perfectly when I connected it to my trailer and despite the extra work in getting it installed, I am quite happy with the results.
Scritto da: Wade
Works great
Works exactly as I would've hoped, installation was a bit hard, the interior panels in the trunk had to be removed, and I had to come up with my own power source in the trunk for the wires, it would've been very hard to get a power wire from the trunk to the battery like the instructions say. I had no plans of drilling holes in the car. Overall works great to run the lights for our jetski trailer
Scritto da: Chad R Baxter
Complicated Install
Makes you run a power wire from the battery all the way to the back of the vehicle for power, shouldn't be a need for this. Should draw power from the tail lights you splice into
Scritto da: C. Lane
Simple to install and works!
Hardest part was running wire to battery, everything else is plug and play!
Scritto da: jim
Great product
Great product
Scritto da: Todd Whipple
Plug and play EXCEPT for the wire to the battery.
As noted in other reviews, the instruction don't provide anything for running the power cable to the battery, which take twice the time as all the rest of the attachments, accomplished in 45 minutes. This is the only reason I didn't give it 5 stars. It would have been much worse if I wasnt able to jack the car up (2014 Mitsubishi Outlander Sport). I looked at the possibility of running under the base boards, but that looked like even more work and I could locate a place under the dash to easily run the wire.
Scritto da: jonathan ml
Works great for my 14’ Lancer
Installed it in a rush before a trip. Took 30 minutes to install, instructions are a bit too generic because my Lancer had the plugs on the right and left side instead of only on the left side. You do not need to remove the taillight assembly on these car, skip this step on a Lancer. Double sided tape was so old it was not sticky anymore. All over I like it because it was easy to install. I decided to wire the battery wire to a cigarette plug instead of trough the engine bay and to the battery directly. Con’s: Sticky tape was bad, wrong instruction for a lancer, routing the batt wire will be a pain trough the firewall.
Scritto da: bob
wireing
very nice working well just the black wire from front of battery to the box a big job taking all the trims off a and passing the firewall but for the rest its ok
Scritto da: Begoodjohnny
Easy install
Easy install, fit perfectly. Working great!
Scritto da: Dalton Russell
Works great, easy install besides running a power wire from the battery
Works flawlessly, the install is simple and easy with the exception of running a power wire from the battery. Would have preferred not to have to run power from the battery but it is what it is.
Scritto da: Daniel Caron
great product
works on my 2015 RVR, easy to connect, everything included :) the only downside, is to run a Power from the battery to the trunk. installation time, approx 45 mins.

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array