Curt Manufacturing 56009 voertuigzijde aangepaste 4-pins aanhangerkabelboom, past op geselecteerde Jeep Grand Cherokee

Brand:Curt Manufacturing

3.7/5

68.94

Indien uw voertuig niet voorzien is van bekabeling voor het trekken van een aanhanger, is CURT maatwerkbekabeling de ideale oplossing. Een op maat gemaakte kabelboom - ook wel een T-connector genoemd - is een eenvoudig, plug-and-play elektrisch apparaat dat wordt aangesloten op het elektrische systeem van uw auto en zorgt voor een standaard, universele aansluiting voor de bedrading van de aanhangwagen. Dit wordt gedaan met behulp van twee of meer voertuigspecifieke, OEM-compatibele connectoren die in het achterlicht worden gestoken, waardoor knippen, splitsen en solderen tijdens de installatie niet meer nodig is. Op maat gemaakte kabelbomen zijn voertuigspecifiek gemaakt en hoewel ze niet voor alle voertuigen beschikbaar zijn, bieden ze wel een van de snelste, gemakkelijkste en veiligste manieren om een ​​voertuig te bedraden om te slepen. Deze specifieke plug-in kabelboom biedt een 4-polige platte connectoraansluiting en is ontworpen als een aangepaste kabelboom voor bepaalde jaren van de Jeep Grand Cherokee (zie toepassingsinformatie om de compatibiliteit van uw voertuig te controleren). Het wordt geleverd met alle benodigde bedradingscomponenten om een ​​betrouwbare aansluiting voor de bedrading van de aanhanger tot stand te brengen, evenals een stofkap om de connector schoon te houden wanneer deze niet in gebruik is. Je hebt een beeld in gedachten van je volgende bestemming -- misschien is het de aanlegsteiger van je favoriete visstek, misschien is het een camping die uitkijkt op een van de meesterwerken van de natuur, of misschien is het de volgende grote werklocatie. Om dat beeld werkelijkheid te laten worden, is echter meer nodig dan alleen dagdromen. Er is een solide verbinding en de juiste hoeveelheid stroom voor nodig. CURT-bedrading op maat is gemaakt met de meest geavanceerde technologie in de branche en is ontworpen om gemakkelijk te installeren, waardoor u een langdurige elektrische verbinding krijgt voor uw trekhaakopstelling.

EAN: 612314560097

Categorieën Home & Garden, Tiers, Trekkeraccessoires, Hardware, Koppelingen,

Past op voertuigen van 2007 tot 2013. Ondersteund door een beperkte garantie van één jaar. Inclusief stofkap om de connector schoon te houden wanneer deze niet in gebruik is. 4-voudige platte uitgang verbindt achterlichten, remlichten en richtingaanwijzers. Eenvoudig plug-and-play-ontwerp maakt snijden of splitsen overbodig. Kan worden aangesloten op het achterlicht van het voertuig om een ​​4-polige platte aansluiting te bieden.
Brand ‎Curt Manufacturing
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 567 ratings 4.6 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item model number ‎56009
Item Weight ‎8.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56009
Model ‎Custom Wiring
OEM Part Number ‎56009
Product Dimensions ‎9 x 4 x 2 inches

3.7

13 Review
5 Star
79
4 Star
12
3 Star
4
2 Star
1
1 Star
4

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: TimWells
Works good
Easy to install and works great.
Scritto da: Lake
You dont have to be smarter than a 5th grader.
The install videos on youtube show how easy it us to hook up a new electrical wiring harness for towing took me about 30 minutes to install.
Scritto da: Terrell Tate
Works as intended
It’s a plug and play system. A little hard to get the passenger side pulled through. It is nice they provide a self tapping screw for the ground.
Scritto da: Herb N
Only slight modification for 2013 Jeep Grand Cherokee Overland.
Not a dislike BUT the wires to the tail lights would not fit thru the frame holes without cutting parts of the seam. SO I simply cut the wires long enough to fished the wires down thru the available hole and connected them below the wheel well. Product works excellent and beats $100+ for dealer to reprogram the computer. Now to figure how to hook up the factory installed 4 and 7 receivers to this system. Not too hard.
Scritto da: Scott Bruce
Great product. Worth it.
Installed perfectly in 10 minutes
Scritto da: Vince Borrego
Easy install on 2012 Jeep Grand Cherokee
I bought this in addition to the Curt Manufacturing 13182 Class 3 2 inch receiver for my 2012 Jeep Grand Cherokee. Install was easy and only requires that you remove the rear tail lights to piggy back off the electrical connections for your trailer. What you end up with is a nice looking 4 pole trailer connector that zip ties nicely and out of the way. Same product they use at UHaul and if you're willing to spend 15 min installing it yourself you can save a bundle. With the 2011-2013 Jeep Grand Cherokees the only strange part was removing the tail lights. 2 plastic pins come out which you can use a flat screwdriver to help remove, then you have to pop out the tail light. At first you feel like you're going to break the tail light but don't worry it just requires a bit of pulling. No damage will happen as it snaps in place. Older style tail lights had all screws, whereas the new ones have 2 plastic snap/plugs and then snap into place. I did a google search for '2012 Jeep Grand Cherokee tail light removal" and found several how to's on the Jeep forums and even a youtube video walking you through the process. Would recommend this purchase for those looking for an aftermarket trailer hitch and wiring.
Scritto da: Javier
Excelente
Muy bueno
Scritto da: andrew j tobias
plug in and no cutting of wires
once you unplug the plug its all plug in and run the wire down and thru the brackets holding the bumper and back up on other light and one hooked up using the supplied self tap screw for the ground .you are set to use .they give you more then enough wire to run and the 4 way wire is long enough .worked out perfect and no worries about shorting system with cutting or soldering wires .
Scritto da: Victoria
Easy install keep 2007 gc
Worked perfectly on my Jeep 2007 grand Cherokee. Easy install less than 10 minutes and I have very little to no automotive knowledge. Just have a power drill as it doesn’t say on the instructions that you need to drill the white ground wire to the metal part of the car, but other than that. Easy as pie, works great, and great price when compared to shops and installation prices.
Scritto da: stuart horan
CURT 56009 Custom Wiring Harness
very easy to install, perfect instructions, took about all of 30 minutes and it was all done .all works perfectly highly recommended
Scritto da: Denis
its was really easy to install
no mess with having to solder and cut wires,,its so easy just push in the clips on the wire harness together behind each tail light and than lead the harness down to the hitch, pug in the trailer lights ,,,,
Scritto da: Maziar M.
Good stuff
Perfect fit
Scritto da: caine
Easily installed
Very simple to install .

Gerelateerde producten

hot
Reese Towpower 74658 T-connector
3.7/5

€ 110.77

Reese Towpower 74658 T-connector
3.7/5

€ 110.77

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array