Digitale manometer, lucht- en gasdruktester, drukverschilmeter met twee poorten, groot LCD-scherm met achtergrondverlichting Klein Tools ET180

Brand:Klein Tools

3.6/5

169.04

De ET180 Digital Differential Manometer van Klein Tools meet lucht- en gasdruk voor poort 1, poort 2 en meet het verschil tussen de poorten. Schakel eenvoudig tussen eenheden: inH2O, bar, oz/in2, psi, mbar, kPa, inHg, mmHg, kg/cm2, ftH20 en cmH2O. Groot LCD-scherm met achtergrondverlichting toont minimum-, maximum- en gemiddelde waarden. Magneet op de achterkant voor handsfree bediening. Al meer dan 160 jaar produceert Klein Tools eersteklas handgereedschap van professionele kwaliteit dat de prestaties, duurzaamheid en precisie levert die nodig zijn om de klus goed te klaren. Onze familie van ingenieurs, arbeiders en vakmensen blijft zes generaties expertise steken in elk gereedschap dat we maken door alleen materialen van de hoogste kwaliteit, superieur vakmanschap te gebruiken en de productie zo dicht mogelijk bij huis te houden. Klein is niet alleen de naam van ons bedrijf, het is ook onze familienaam. En aangezien we een Amerikaans bedrijf zijn dat eigendom is van een familie en door een familie wordt gerund, weet u dat u op ons kunt rekenen om hier morgen te zijn. Klein Tools maakt niet alleen geweldige producten, we maken geweldige producten die voldoen aan de eisen van de professionals die ze elke dag gebruiken ... Sinds 1857.

Hoeveelheid
Voeg toe aan winkelkarKoop nu
GROOT LCD-scherm met ACHTERLICHT zorgt voor een goede weergave bij weinig licht en toont waarden bij het schakelen tussen minimum, maximum en gemiddelde. ELF GEMETEN EENHEDEN: Schakel eenvoudig tussen inH2O, bar, oz/in2, psi, mbar, kPa, inHg, mmHg, kg/cm2, ftH20 en cmH2O. STERKE MAGNEET OP ACHTERZIJDE beveiligt manometer voor handsfree bediening. MONITOR EN PROBLEMEN OPLOSSEN van problemen in HVAC-systemen met een bereik van +/- 60 inH2O en een volledige schaalnauwkeurigheid van +/- 1,5 procent. MEET STATISCHE EN DIFFERENTIËLE druk van twee poorten in lucht- en gassystemen.
Batteries 3 AAAA batteries required. (included)
Brand Klein Tools
Country of Origin China
Department Unisex-Adult
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 1 x 1 x 1 inches
Item model number ET180
Item Weight 5.92 Ounces
Manufacturer Klein Tools
Material Blend
Product Dimensions 1 x 1 x 1 inches; 5.92 Ounces

3.6

9 Review
5 Star
75
4 Star
15
3 Star
6
2 Star
2
1 Star
3

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Pat Thompson
Magically repaired my heater
Had a problem with my heater tripping from the pressure sensors not seeing enough draft. Got this to diagnose. Hooked it up with the 1900 feet of hose it comes with and measured pressure. Exactly where it’s supposed to be. Great. Waited around for the fault condition to occur: IT HAS NEVER OCCURRED AGAIN in 3 1/2 months! I, uh, just left it plumbed in and backed slowly away. Problem solved!
Scritto da: james
Case sucks.
I started with some other brand which did a decent job but with the Klein I can measure differential pressure which is much better. Could use at least one barb fitting for the price I paid for this. That 'other brand' came with one and only cost $39.
Scritto da: Diane Henry
Did the job for testing self installed heat pump.
Works well
Scritto da: Tim
Great manometer.
Excellent meter with a string magnet on the back and a clear screen on the display. I use this to check the pressure of my LP system on my RV. I really like the magnet, as it allows me to attach it to the side of the propane tank as I'm taking a reading.
Scritto da: donald foglesonger
ok
not very accurate
Scritto da: Scott
Tiny hose
The manometer seems to work great. The hose is too small around and soft for what I need on gas valves.
Scritto da: Gary Gendel
Make sure you have a snug fit with your tubing
This is a basic unit that is simple to use and easy to read. I needed it to calibrate an ERV. I originally had a very hard time getting a stable reading and even using some stuffing around the tubing to make a better seal didn't help. I bought some natural latex tubing that had a better seal which made things much better and repeated readings were stable. The magnet in the back was very handy to affix the meter in a good location so my hands were free to make the adjustments. I have a second and bigger ERV to install but I'm confident that calibration will go smoothly. If I had to complain about something, it would be the case. It's pretty cheaply made and doesn't really have a good layout for the meter and tubing. But it does it's job.
Scritto da: Syed
Not the one you’re looking for
I bought this to diagnose the Honeywell gas valve on my furnace. Felt that Klein was name brand to go for. Unfortunately, this manometer doesn’t come with any barbed adapters to connect to plugs on the gas valve. I needed a 1/8 in MIP to barb adapter, which was impossible to find at local hardware stores. It’s a cheap piece they could have thrown in to make a complete kit. Incredibly frustrating that it was not included.
Scritto da: Wrench
Awesome Tool
This little tester works like a charm!

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array