0
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister

JET CS-18 vloerstandaard voor frees/boormachines (350045)

Brand:Jet

3/5

€
1192.85

Krijg gemoedsrust op het pad en overwin offroad-obstakels met gemak met de Polaris RZR Winch-montageplaat van Rough Country. Deze eenvoudig te installeren kit upgradet uw UTV met essentiële herstelmogelijkheden voor wanneer u deze het meest nodig heeft. Deze heavy-duty lierplaat is gemaakt van een duurzame 3/16 inch stalen constructie en heeft dubbele montageboutpatronen die zijn ontworpen om stevig te passen op lieren van 3.500 lb-5.000 lb, zodat u de exacte opstelling kunt kiezen die u nodig heeft. Elk laat is zwart gepoedercoat om de elementen af ​​te weren en een lange levensduur van goede looks en prestaties te bieden. Installatie is een fluitje van een cent, boren is niet nodig! Schroef deze upgrade eenvoudig vast en bevestig uw lier en u bent klaar voor wat het pad ook op uw pad brengt.

Hoeveelheid
Voeg toe aan winkelkarKoop nu

EAN: 0662755793172

Categorieën Tools & Home Improvement, Power & Hand Tools, Krachtgereedschap Onderdelen & Accessoires, Stands & Mobile Bases, Stands,

JET Red Assurance-garantie: ondersteund door JET's toonaangevende garantie van 90 dagen tegen fabricagefouten. Afmetingen: 31-1/4 x 23-1/4 x 28. Compatibiliteit: Ontworpen voor JET Mill/Boormachines (350017, 350018, 350020).
Batteries Included? ‎No
Batteries Required? ‎No
Brand Jet
Brand ‎Jet
Color Black
Color ‎Black
Country of Origin ‎Taiwan
Customer Reviews 4.0 4.0 out of 5 stars 27 ratings 4.0 out of 5 stars
Included Components Floor Stand
Included Components ‎Floor Stand
Is Discontinued By Manufacturer ‎No
Item model number ‎350045
Item Package Quantity ‎1
Item Weight ‎72 Pounds
Manufacturer ‎JET
Part Number ‎350045
Power Source Hand Powered
Power Source ‎Hand Powered
Product Dimensions 32"L x 26"W x 29"H
Product Dimensions ‎32 x 26 x 29 inches
Product Dimensions ‎32"L x 26"W x 29"H
Warranty Description ‎90 Days

3

8 Review
5 Star
47
4 Star
25
3 Star
15
2 Star
0
1 Star
12

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Harvey Adkins
Expensive for what it is.
Would have preferred a stronger stand!! Hated putting my new Drill-Mill on it, worrying about future problems. It doesn't end up perfectly square once assembled. This was a problem when adding a roller base. Also, the top pan sits loose on the top and is not attached until the mill is set in place. This makes it very difficult to line up the mounting holes!! Then, the mounting holes are spaced so that when the mill sits on top of it, the inside holes are not spaced so that the rubber grommets stay in because the machine sits on half of them which causes them to peel up and out. Obviously, the engineers that designed this unit, have never put one together and have never had to LIFT and place a drill/mill on it and keep the top pan lined up! It is funny that it comes with a set of legs, again, the unit weighs almost 400lbs. I didn't trust using the provide legs, that's why I bought this unit. If I had to do it all over again, I would have had a stand made by a local welder and had it made out of stronger welded tube steel. Could have had much stronger unit for about the same money or even less!! Only time will tell if it lasts.
Scritto da: Jane K. Smith
Just okay so far
I bought this Jet stand to hold my son's recently purchased mill/drill. The package arrived in fine shape but there were some issues that I don't equate with a quality product. The first thing noticed as we began assembling the stand was some sharp edges on the sheet metal parts. No cuts but since people will be reaching inside the stand to access stored items the edges will need to be fixed. Next we found the tabs used to align and secure the side panels had to be pried open to allow them to mate with the front and back panels. Got that done and then realized the instructions failed to indicate a lock washer should be used with each of the hex bolts. Not a big deal but instructions should be more detailed. We also found the door did not match the opening in the front panel. A few whacks with a hammer and the door fit but since these are stamped parts it is hard to understand how Jet can't make a square door fit a square opening without the customer having to do the final shaping. On the plus side the stand looks nice and feels very sturdy so should not be any issues holding the mill/drill. We have not mounted that yet so I will update this review when that is completed.
Scritto da: Michael B.
Flimsy
An overpriced, flimsy product that's difficult to assemble.
Scritto da: Vincent Sanchez
Short but sweet!
Very sturdy and professionally made. I was pleasantly surprised to find that the mill I had purchased from Harbor Freight back in 2002 (Now discontinued) fit this stand perfectly. The only problem I have with it is that it's too short to use while standing, so I'll have to get a 2 foot stool. Also, the hole for the door has the wrong size thread for the door handle bolt. Luckily, I happened to have the correct size tap tool, so that solved the problem quickly.
Scritto da: Paul D.
Fit My Grizzly G0619 Mill Except for Holes in Base
Metal was a lighter gauge than I was expecting (think filing cabinet), but it was surprisingly sturdy nonetheless. Removing the leveling feet allowed the frame to contact the stand base better. Will need to close holes in drip pan with stoppers. Would buy again.
Scritto da: Amazon Customer
While the stand is good quality it and the chip pan come with 2 ...
While the stand is good quality it and the chip pan come with 2 sets of holes punched out to accommodate 2 different size machines. The sealing grommets that plug the unused holes are made for only one thickness of metal. The pan and the stand are 2 thicknesses and the grommets suck. That plus the fact that the smaller machine base catch half of the grommets making them pop off.
Scritto da: Turtle Shell 666
Sturdy
Holds up my 600 pound mill drill, does everything it needs to, not necessary to bolt machine to it, 600 pounds isn't going anywhere
Scritto da: Steve
Fits great
Worked well for jet 18 model fits perfectly. Needs adjustable feet to level out though

Gerelateerde producten

hot
Rockwell RK9002 JawHorse Sheetmaster draagbaar werkstation
3.7/5

€ 917.89

Rockwell RK9002 JawHorse Sheetmaster draagbaar werkstation
3.7/5

€ 917.89

hot
BOSCH TS1016 Uitvoersteunconstructie
3.5/5

€ 175.27

BOSCH TS1016 Uitvoersteunconstructie
3.5/5

€ 175.27

hot
BOSCH GTA500 inklapbare standaard voor 10-inch draagbare werktafelzaag (GTS1031), blauw
3.8/5

€ 228.69

BOSCH GTA500 inklapbare standaard voor 10-inch draagbare werktafelzaag (GTS1031), blauw
3.8/5

€ 228.69

hot
BOSCH Elektrisch gereedschap FSN800-32 31.5 Plankstop met gaten 32 mm voor stellingpennen
4.1/5

€ 173.96

BOSCH Elektrisch gereedschap FSN800-32 31.5 Plankstop met gaten 32 mm voor stellingpennen
4.1/5

€ 173.96

hot
BORA Centipede 2-delige snelspannerset, CA0302, klemtoebehoren voor BORA duizendpoot-werkstandaards
3.5/5

€ 28.59

BORA Centipede 2-delige snelspannerset, CA0302, klemtoebehoren voor BORA duizendpoot-werkstandaards
3.5/5

€ 28.59

hot
Metabo HPT Zaagbokken
3.6/5

€ 230.88

Metabo HPT Zaagbokken
3.6/5

€ 230.88

hot
JET CS-18 vloerstandaard voor frees/boormachines (350045)
3/5

€ 1192.85

JET CS-18 vloerstandaard voor frees/boormachines (350045)
3/5

€ 1192.85

hot
CRAFTSMAN metalen zaagbok, inklapbaar (‎CMST11154)
3.8/5

€ 58.13

CRAFTSMAN metalen zaagbok, inklapbaar (‎CMST11154)
3.8/5

€ 58.13

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array

Totaal:€ 0.00

Zie winkelwagenUitchecken

Categorieën

Alle categorieën
Menu Categorieën In de buurt van Winkelwagen

Menu