0
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister

Mophorn 10KG Roterende Lassen Klepstandsteller Draaitafel Tafel 110V Mini 0 tot 90° Lassen Klepstandsteller Positionering Draaitafel 2.5 Inch 3 Kaak Draaibank Chuck 180mm Draagbare Lasser Klepstandsteller Draaitafel Machine

Brand:Mophorn

2.6/5

€
531.02

Brede toepassing: kan op de werktafel worden bevestigd of specifiek gereedschap voor het klemmen van werkstukken met handmatig lassen, kan ook worden gebruikt met een lasmachine om automatisch te lassen, maar ook voor snijden, slijpen, assembleren, testen en andere processen. Traploze snelheidsregeling: met behulp van een voetschakelaar om de tafelrotatie te regelen, wordt de snelheid geregeld door de knop op de machine (traploze snelheidsregeling van 0,5-5r/min). Drie-kaak lasklem: drie kaken zijn versterkt om te voorkomen dat de lasstukken bewegen en vallen. Het is geüpgraded om nauwkeuriger en praktischer te zijn. Kantelbare tafel van 0-90 °: de draaistructuur van worm en tandwiel heeft de functie van zelfvergrendeling en de werktafel kan traploos worden gedraaid tussen 0-90 °. Het kan ook in elke gewenste hoek worden bevestigd. Werkcapaciteit: 5KG/10KG: horizontaal/verticaal laadvermogen: 10kg/5kg; Werktafel diameter/hoogte: 18cm/7in.;23.2cm/9in. Gemaakt van roestvrij staal, kenmerken van hoge kwaliteit en duurzaamheid.

Geen eenheden beschikbaar

EAN: 0700721078738

Categorieën Tools & Home Improvement, Welding & Solderen, , Lassystemen,

Brede toepassing: kan op de werktafel worden bevestigd of specifiek gereedschap voor het klemmen van werkstukken met handmatig lassen, kan ook worden gebruikt met een lasmachine om automatisch te lassen, maar ook voor snijden, slijpen, assembleren, testen en andere processen. Traploze snelheidsregeling: met behulp van een voetschakelaar om de tafelrotatie te regelen, wordt de snelheid geregeld door de knop op de machine (traploze snelheidsregeling van 0,5-5r/min). Drie-kaak lasklem: drie kaken zijn versterkt om te voorkomen dat de lasstukken bewegen en vallen. Het is geüpgraded om nauwkeuriger en praktischer te zijn. Kantelbare tafel van 0-90 °: de draaistructuur van worm en tandwiel heeft de functie van zelfvergrendeling en de werktafel kan traploos worden gedraaid tussen 0-90 °. Het kan ook in elke gewenste hoek worden bevestigd. Werkcapaciteit: 5KG/10KG: horizontaal/verticaal laadvermogen: 10kg/5kg; Werktafel diameter/hoogte: 18cm/7in.;23.2cm/9in. Gemaakt van roestvrij staal, kenmerken van hoge kwaliteit en duurzaamheid.
Brand Mophorn
Country of Origin China
Included Components 1x welding positioner
Item Dimensions LxWxH 14.6 x 14.4 x 12.6 inches
Item model number Welding Positioner
Manufacturer VEVOR
Product Dimensions 14.6 x 14.4 x 12.6 inches; 26.41 Pounds
Voltage 110 Volts

2.6

13 Review
5 Star
46
4 Star
11
3 Star
17
2 Star
8
1 Star
19

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: E. McCauley
replace the motor
I would have given 5 stars if the rpm wasn't so high. I replaced the motor on mine with one bought here on Amazon. You can select from several rpm ranges. The one I chose was the 40rpm one which slows the table down to 1.3 to 6.75 rpm. The last half of the adjustment knob there is little change though. It is a bit tricky since you need to remove the motor gear before you can get the motor out, and you are working down in a hole. I chipped off the dab of glue then used a Smith Little torch to heat the gear to smoking. I made a small gear puller as shown from a bent piece of aluminum to pull it off while hot. I will go back on the new motor cold with ease and you will need to put a dab of epoxy or otherwise to hold it. I also sanded the bottom rim where contact with the graphite/copper bar is as well as between the chuck and table. Degrease with brake cleaner at these locations for better electrical contact. Works well for small stuff which is what I bought it for. Mine is the one from Vevor.
Scritto da: Bill G
Functional with limits.
Construction is as expected but assembly leaves you wanting. Rotational speed is inconsistent. There seems to be a tight spot in the meshing of gears. Probably a center hole out of concentricity with pitch diameter.I have a machine shop, so, I can fix it but many won't be able to. Probably should have built it myself but was on a time constraint with this project.
Scritto da: toth welding
Good rotary table
The media could not be loaded. Was skeptical about buying this because of the reviews. Even bought a 40rpm replacement motor to slow it down incase it was too fast like people mentioned. Out of the box it worked good. Yes it slowed down enough to weld with. Didn't stop like people were saying. Also the ground clamp works good like it's supposed to. I did grind the paint off the bottom and clean any coating that was on the contactor for the ground. Since I had the 40rpm motor I put that on to try it and definitely was a good choice because it made it alot stronger with the lower rpm motor. I turned it way down and put pressure on it and the table kept turning. Definitely happy I bought it. Will post a video also
Scritto da: steve henle
Won't go slow enough.
Speed wont turn down slow enough so constantly have to toggle the foot switch. Would be much better if geared down more
Scritto da: Glenn Marchione
it works
Very low power but it spins and that's all we want it for.
Scritto da: Dirk Schimmel
Only works on the higher speeds
Not worth the money unless you only plan to use it on very small diameter tube or material. When you step on the pedal and slow it down to the speed you need for say 2” tube everything looks great. But as soon as you let off the pedal it won’t restart until you turn the speed control back up to a higher rpm. Not sure what the problem is but don’t buy it unless you need to weld very small parts in the higher rpm range.
Scritto da: Kenda Wehrly
Love it
Its is perfect for what I needed
Scritto da: Kimberly
Ok
Everything was great other than the knob was broken when opened
Scritto da: Thomas
Ok for rotating a piece with the ground clamp on the piece, not for welding using the turn table
Not very useful, rotating plate is not conductive enough. Even after sanding off the underside, which is non-conductive paint, you will still have issues with the coated steel under the lathe chuck. The lathe chuck sticks and is ok quality, I took it all apart, lubed and re-assembled it all, then cycled the chuck to break it in for it to be good. The motor is geared too low, resulting in 80% of the speed settings being unusable as it rotates too quickly. At low speeds there is no torque so it will get stuck trying to rotate. Perhaps it will work well for high speed MIG welding.
Scritto da: al burnham
it will be a miracle if it comes undamaged
i knew the was a sub par product but will do what i need it to do
Scritto da: cheryl
Fantastic!
This was a Christmas gift for my husband, which he asked for. He absolutely loves it!! Does exactly what its supposed to. It was a great purchase for me!
Scritto da: Spencer
Tried using it for tig welding and it went pop and now doesn’t work but for mig it was fine..
Doesn’t go slow very well had to clean the bottom plate so the ground wouldn’t stick and then the ground didn’t hold very well to the clamp overall works but not well
Scritto da: Deeanne Bouchard
Dont work in slow speed
It will not work in slow spend

Gerelateerde producten

hot
XtremepowerUS 250 AMP Arc Lasser Lasmachine Wiel Stok Solderen Lasser Masker Met Accessoires Kit ARC 250 Lasser
2.7/5

€ 509.05

XtremepowerUS 250 AMP Arc Lasser Lasmachine Wiel Stok Solderen Lasser Masker Met Accessoires Kit ARC 250 Lasser
2.7/5

€ 509.05

hot
H & S Autoshot 4550 Starter Plus Stud Welder Kit, geel
3.7/5

€ 523.71

H & S Autoshot 4550 Starter Plus Stud Welder Kit, geel
3.7/5

€ 523.71

hot
Mophorn 10KG Roterende Lassen Klepstandsteller Draaitafel Tafel 110V Mini 0 tot 90° Lassen Klepstandsteller Positionering Draaitafel 2.5 Inch 3 Kaak Draaibank Chuck 180mm Draagbare Lasser Klepstandsteller Draaitafel Machine
2.6/5

€ 531.02

Mophorn 10KG Roterende Lassen Klepstandsteller Draaitafel Tafel 110V Mini 0 tot 90° Lassen Klepstandsteller Positionering Draaitafel 2.5 Inch 3 Kaak Draaibank Chuck 180mm Draagbare Lasser Klepstandsteller Draaitafel Machine
2.6/5

€ 531.02

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array

Totaal:€ 0.00

Zie winkelwagenUitchecken

Categorieën

Alle categorieën
Menu Categorieën In de buurt van Winkelwagen

Menu