0
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister
0

Totaal:€ 0.00

Zie winkelwagenUitchecken
LoginRegister

National Hardware N280-610 V7640 universele T-handgreep met vergrendeling in chroom, schacht: 5/16 vierkante x 4

Brand:National Hardware

3.3/5

€
41.35

PRODUCTBESCHRIJVING National Hardware N280-610 V7640 Universele T-handgreep in chroom VAN DE FABRIKANT Dit is de meest voorkomende vergrendeling voor garagedeuren. Deze vergrendelingshendel wordt aan de buitenkant van de garagedeur gemonteerd en bedient de meeste interne vergrendelingsmechanismen waarvoor een 5/16-inch dikke schacht nodig is. Het heeft een duurzame en aantrekkelijke chromen afwerking en wordt geleverd met twee sleutels.

Hoeveelheid
Voeg toe aan winkelkarKoop nu

EAN: 5448095553479

Categorieën Tools & Home Improvement, Racing Wheels, Building Materials, Doors, Garagedeuren, Openers & Parts, Hardware, Locks,

Lees en begrijp alle instructies voordat u met het werk begint. Schacht is 5/16-inch bij 4-inch. Verchroomde afwerking. Ook te gebruiken op vele campertops. Voor garagedeuren van hout of metaal. Te gebruiken met N280-701 draaislot en N280-800 klikslot. Meest voorkomende vergrendelingshendel voor houten deuren.
Batteries Included? ‎No
Batteries Required? ‎No
Brand National Hardware
Brand ‎National Hardware
Color Chrome
Color ‎Chrome
Customer Reviews 4.3 4.3 out of 5 stars 354 ratings 4.3 out of 5 stars
Exterior Finish Chrome
Exterior Finish ‎Chrome
Finish ‎Polished
Finish Type ‎Polished
Handle Material ‎Wood
Handle Type ‎Pull Handle
Included Components ‎Lock
Is Discontinued By Manufacturer ‎No
Item model number ‎N280-610
Item Package Quantity ‎1
Item Weight ‎0.03 Pounds
Item Weight ‎0.48 ounces
Manufacturer ‎National Hardware
Material Wood
Material ‎Wood
Number of Items ‎1
Package Type ‎Standard Packaging
Part Number ‎N280-610
Product Dimensions 7"L x 2"W
Product Dimensions ‎7"L x 2"W
Size ‎Shaft: 5/16" sq x 4"
Unit Count ‎1.0 Count

3.3

13 Review
5 Star
65
4 Star
15
3 Star
10
2 Star
4
1 Star
6

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Rusty
Will do the job
I was disappointed that the handle was a returned item. I'm sure it was returned because some chrome was damaged and the package was torn open. It worked fine, I could have spent a little less for a plain one. A little disappointed. Too much trouble to return.
Scritto da: Andrew Aragon
It works
The bar was too long so i had to cut it down a bit but that was my mistake. The lock doesn't operate very smooth but other than that it works just fine
Scritto da: Kindle Customer
Availability
It was easy to get from Amazon and it was a fair price. Works great!
Scritto da: Stephen
Does what I needed it to do.
Great product in relation to it's quality. Only problem is that it didn't have a hole in the shaft to install the knob on the inside of the door. All I needed to do was slide the inside knob onto the shat and mark where the hole should be and drill a hole through the shaft. No big deal, but it did take more time to install it. Works just fine.
Scritto da: Clive Woodhouse
Great as a replacement canopy lock
I have a Mazda B2000 with a canopy mounted on its bed. The previous owner had lost the key to the canopy back hatch lock. Since the lock was also not in the best shape because of rust, I decided to look around for a full lock replacement. The specs and pictures were close enough to the original for me to have a high level of confidence that it would fit. Replacement entailed drilling out pop rivets fastening the old lock to the hatch and fixing the new lock back in place with rivets.. If doing this replacement you would need access to a pop rivet gun. The square sectioned shaft was longer than the original, but could be cut to size with a hacksaw without too much difficulty. The new lock has been installed now for about 3 years without any problems. It has held up well to the elements (the truck is parked outside) with minimal rust/corrosion and co peeling of the plating. For the price (about $3) you would be hard pressed to find a fix for your canopy door for less.
Scritto da: mike
Good Lock/T-Handle. Requires Counterbore/Clearance hole
I bought this before checking around local stores and didn't pull mine off first to see what it looked like under the face plate. When I went to install I found the design underneath to be different than mine. The National Hardware would require a .850 dia x .300 deep counterbore in the garage door to fit. Probably a detail that should be mentioned. I searched more and found that Menards had an exact match for a little more 7.79 plus tax. 3/8 to 7/16 dia clearance hole is all that's needed. The National Lock looks great and felt durable. The teeth on the key seemed more simple than the ones on the Ideal Door one I picked up at Menards but I'll bet either one would likely be easy to pick. Neither one came with screws, I was able to use the existing ones. I would recommend using stainless steel screws. I was going to post pictures for more clarity but I see no option.
Scritto da: gary caspelich
Works great to replace accordion L locks
I used these to replace the , L-locks on my accordion shutters. After 10 years the cheap cast L-lock handles started to deteriorate from the Florida sun. These are less than $10 compared to the $20 for replacement L-locks. The mounts fit perfectly flush with existing screw holes and I added zinc machine screws and doubled up on nylock nuts to keep the locks on tight. Only issue is I had to cut 2" of the pin with a grinder to make flush. Reuse hook and plastic sleeve.
Scritto da: Tony
Installed easy
I replaced a 45 year old unit that looked like this. If it can replace that, it's good enough for me.
Scritto da: Red Rock Crab
works great
I know it does not fit, and need little modification, but nice to have it and is way more cheap than the original
Scritto da: Jacob Z.
Lacks installation hardware
only sent 2 really short metal screws for mounting. Not enough hardware sent with product to do the job. I had to run to a hardware store to get what I needed to install the handle.
Scritto da: lloyd tollestrup
Solid lock
Someone tried pretty hard to brake the lock with no success. Looks like they tried prying on the handle to make it turn and the handle broke before the lock did. Exactly what you want to happen. Just bought another one!
Scritto da: William Hutton
Works good
Works good . No issues
Scritto da: JG
Versatile, durable, and good value
Worked great to replace my truck cap glass t-handle. This product doesn’t come with hardware, so when I was installing I drilled the existing two holes up a size to fit my hardware. This was easy to do and the new handle didn’t crack or break from drilling.

Gerelateerde producten

hot
Perko 0931DP2BLK inbouwslot met verstelbare nokstang, zwart
3.1/5

€ 88.67

Perko 0931DP2BLK inbouwslot met verstelbare nokstang, zwart
3.1/5

€ 88.67

hot
Prime-Line GD52138 Inside Deadlock - Behuizing van gegalvaniseerd staal voor zwaar gebruik, past op de meeste garagedeuren, extra bescherming als veiligheidsslot, 7/8 x 1/8, enkel pakket, grijs
2.9/5

€ 38.34

Prime-Line GD52138 Inside Deadlock - Behuizing van gegalvaniseerd staal voor zwaar gebruik, past op de meeste garagedeuren, extra bescherming als veiligheidsslot, 7/8 x 1/8, enkel pakket, grijs
2.9/5

€ 38.34

hot
Dorman 77124 universele vergrendelingshendel
0.1/5

€ 45.12

Dorman 77124 universele vergrendelingshendel
0.1/5

€ 45.12

hot
National Hardware N280-610 V7640 universele T-handgreep met vergrendeling in chroom, schacht: 5/16 vierkante x 4
3.3/5

€ 41.35

National Hardware N280-610 V7640 universele T-handgreep met vergrendeling in chroom, schacht: 5/16 vierkante x 4
3.3/5

€ 41.35

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array

Totaal:€ 0.00

Zie winkelwagenUitchecken

Categorieën

Alle categorieën
Menu Categorieën In de buurt van Winkelwagen

Menu