Pony 13025 3-inch lichte klem op bankschroef

Name: Pony 13025 3-inch lichte klem op bankschroef
Brand: Pony Jorgensen
SKU: 0044295130257
Price: 77.65 EUR
Availability: InStock

Brand:Pony Jorgensen

3.5/5

€
77.65

PRODUCTBESCHRIJVING Pony 13025 3-Inch Light Duty Clamp On Vise is ontworpen voor licht gebruik thuis, in de winkel en voor professioneel gebruik. Het is volledig draagbaar, maar toch eenvoudig en veilig te monteren op randen tot 2 inch dik. Kenmerken: 3-inch bekbreedte, 2-1/2 inch openingscapaciteit, geplateerde stalen schroef en handgreep, stalen dubbele geleidestaven zorgen voor een soepele werking, oranje gebakken emailafwerking voorkomt roesten, gegoten pijpbekken houden ronde pijp vast. Het in Chicago gevestigde Pony Tools Inc. (voorheen zakendoen als Adjustable Clamp Company), opgericht in 1903, is de fabrikant van alle Pony Vises. Onze Pony Vises worden gemaakt in China. AMAZON.COM Elke werkplaats heeft minstens één bankschroef nodig, en Pony's ongelooflijke klemklem is perfect. Het is volledig draagbaar en klemt op elke tafel tot 5 cm dik. Het schuifhandvat draait als een zonnetje en klaar is kees. Voor zo'n ongelooflijk goedkope bankschroef zijn de kaken erg breed en hebben ze zelfs een gekarteld oppervlak, met een open capaciteit van een volledige 2-1/2 inch. We kunnen duizend toepassingen bedenken voor zo'n handig apparaat. Het is als een extra hand wanneer en waar je het nodig hebt. Pony's heeft zijn reputatie verdiend als maker van fijne klemmen, dus je weet dat alles in de kenmerkende feloranje kleur goed bij je past. Dit is geen uitzondering.--Kris Jensen-Van Heste VAN DE FABRIKANT Zowel professionals als doe-het-zelvers zullen de standvastige klemkracht, precisie en soepele werking van de Pony Light-Duty Clamp-on Vise waarderen. Gekartelde bekken houden stevig vast, terwijl de met staal beklede dubbele geleidestangen elke keer weer voor recht en vlak klemmen zorgen. Met een verschuifbare penhendel kunt u snel draaien wanneer deze gecentreerd is, of schuiven zodat u de hele penlengte kunt gebruiken voor het aanzwengelen van hefboomwerking wanneer u echt op het materiaal moet drukken. Een onderste klem bevestigt de hele bankschroef aan werktafels tot vijf centimeter dik. Grijs gietijzeren gietstukken met oranje gebakken emailafwerking zorgen voor een langere standtijd. Deze Pony Vise is sterker dan vergelijkbare bankschroeven en is ook zuinig. KENMERKEN * 2-1/2-inch bekopeningscapaciteit voor het vasthouden van een verscheidenheid aan materialen * Drie-inch, getande kaken voor standvastig klemmen * Tafelklem kan stevig worden gemonteerd op werktafels tot 2 inch dik * Dubbele geleidestangen voor positieve klemming * Gemaakt met geplateerd staal voor een langere standtijd SPECIFICATIES * Openingscapaciteit 2-1/2 * Bekbreedte 3 * Tafeldikte tot 2 Zie meer

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0044295130257

Categorieën Tools & Home Improvement, Power & Hand Tools, Workholding, Handgereedschap, Vises, Bench Vises,

Stalen dubbele geleidestangen zorgen voor een soepele werking. Geplateerde stalen schroef en handvat. Eenvoudig en veilig te monteren op randen tot 2 inch dik. 2-1/2 inch openingscapaciteit. 3-inch kaakbreedte. Het product wordt vervaardigd in China. Gebruikt voor handgereedschap en gereedschapsorganisatoren, klemmen. Dit artikel is Pony 13025 3-inch lichte klem op bankschroef.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Orange
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 166 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Product Information Guide
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎3-Inch Light Duty Clamp On Vise
Item Package Quantity	‎1
Item Weight	‎4.17 pounds
Manufacturer	‎Adjustable Clamp
Material	‎Steel
Measurement System	‎Inch
Part Number	‎13025
Product Dimensions	‎6.75 x 3.25 x 5.25 inches
Size	‎1 Pack
Style	‎Modern
Warranty Description	‎1-Year Limited Manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Zach B.

Excellent for the Money and Intended Use

It's light duty and you should plan to use it as such. My current house is too small to have a dedicated workshop area, despite all the work I do on guns and other things. I got this so I could clamp it to the kitchen counter for an AR build. It's not as good as if I had a dedicated space for a medium duty vise, but it worked as well as could be expected. My two complaints are the depth of the vise and the clamp face surface material. When the vise is open you don't have enough depth to it for some needs.The top guide bar gets in the way. As other reviewers have said the clamp face is smooth paint. This allows slippage without a lot of clamp force but I don't see this as a big drawback as they make this stuff called... sandpaper. Skateboard tape would be another good way around this. Great vise that seems well put together. Just remember that it's quite small and for light use.

Scritto da: Triple Bogie

Very Solid built Vise for $20 Shipped - Great for Golf Grip Installation!!!!

I was looking for an inexpensive vise to use to install my new golf grips. I searched many others on ebay and Amazon and finally settled on this one due to the low price and free shipping. Today I installed my golf grips on my irons and this vise worked perfectly. You have to also buy the rubber shaft holder that surrounds the shaft when clamping down. I mounted this vise to my kitchen table and used 2 pieces of cut bicycle tube to protect the top and the bottom when gripping this vise to my table. The rubber also acted as a grip and held well. I could see way more uses from this vise but my main focus on buying this was for re-gripping my golf clubs. It makes aligning and installing the new golf grips onto the shaft really fast. I would rate this 10 STARS for the low price and good quality, but the MAX is 5 STARS.

Scritto da: Michael LaBossiere

A nice, small vise.

On the plus side, the vise is made entirely of metal (no cheap plastic parts) and can be secured via its clamp to a table, sawhorse or other surface. The jaws are smooth and while other reviewers have complained about a weak grip, I found mine to hold metal rods, wood and other items quite well. On the minus side, the pin used in one of the rods grinds against the body of the vise when opening the jaws. It is not hard to open the jaws, it is just a bit annoying. The jaws close smoothly. As the description says, this is a light-duty vise and is suitable for light work. It is really not designed for fine work-you would obviously want a specialized vise for things like tying flies or doing fine jewelry work.

Scritto da: Dan and Roe Sang

Clamp on vise

Like I can mount it any where. Have a rubber made cabinet outside and used it many times when I have cut or loosen any thing. Also like that it easy to come off and can store it and dose not take up too much room.

Scritto da: racer1

Ok for the price

I haven't used this vice yet and is smaller then I thought but clamps to surfaces I tried just fine. Be aware though this vice does not have jagged jaws to hold maybe slippery items as well but clamps tight enough so should be fine. Vice should work for what I bought it for, sharpening saw blades and or holding material for gluing, drilling or cutting etc although jaws only open to a little over 2" so it wont hold like larger PVC pipe or materials larger then that.. The fact that its portable is nice also so can be used anywhere there is something like a bench or table to clamp to.

Scritto da: Ron DiGiovanni

Deceptive Appearance

Somehow, this vise seems larger in the photo. The product description does not give any indication of the most important feature, namely, the jaws width. They're 3 inches wide, and so now you know how small the product really is. Also, in the photo the jaws have the appearance of having teeth, by the fact that they are not painted. However, in reality the jaws are perfectly smooth on the inside, and are painted orange like the the rest of the item. Fortunately, it works well for the specific purpose I had for it. The clamp is OK for this size of vise and the jaws have sufficient strength. But just keep in mind, this is most definitely a hobby clamp which is just perfect for your Dremmel tool, but most certainly not compatible with your angle grinder. Ron DiGiovanni Easton, PA

Scritto da: Mark Masaki

Solid painted metal; does what it is intended to do, but smaller than the picture suggests.

It is smaller than I expected, but also heavier and more solid. There isn't much space to work with for the bottom clamp, but it's designed to be attached to a table or desk anyway, so I give it 5 stars for what it can do for the money. There is no swivel of course, but no wiggle or slippage once it is clamped tight. There is no rubber stoppers on the vice, think "solid painted metal." You could probably kill someone with this if thrown, so watch out for your toes if you drop it. Mine had it's handle sticking out of the factory and shipping packages.

Scritto da: Duke VonMeep

Definition of meh

Meh. It works and is portable but don't think you are getting the same performance as a bolted down heavier duty vise. Many would consider this a light duty vise and I agree. So for what it is it is technically great and bump up the rating to 4/5, HOWEVER, advice is to only buy if for some reason you just are not able to get a bolted down vise (you live in an apartment and can't fit a work table/bench, you need to have it with you like in a truck or something) just get a bolted down vise as those are more capable and you probably will end up getting one eventually anyway and probably have access to a work bench.