Raider TDB-1211 1/2 spanbout voor sneeuwscooteraanhangwagen spanstang/krukplaat

Brand:Raider

3.4/5

41.03

Geniet van het warme weer terwijl u ontspant op de Clearwater Outdoor Patio Furniture Collection. Deze poef voor buiten brengt eigentijdse esthetiek naar een achtertuin, veranda, terras, terras of zwembad en heeft een geweven touwband onder het met schuim beklede kussen dat een luchtige charme aan de kust geeft. Rust en ontspan in comfortabele kussens met afneembare all-weather hoezen voor eenvoudig schoonmaken. Het onderstel van deze poef is gemaakt van premium teakhout van klasse A dat een mooie, rijke houtnerf heeft en van nature weerbestendig is. Inclusief niet-strepende voetglijders om vloeren te beschermen. Gewicht Capaciteit: 498 lbs. Set bestaat uit: One - Clearwater Outdoor Patio Ottoman Productafmetingen: Totale productafmetingen: 26L x 26B x 10,5H Binnenste sectionele Ottomanafmetingen: 23 - 23,5L x 23 - 23,5W Beenafmetingen: 1 - 1,5L x 1 - 1,5W x 10,5 H

EAN: 0802024001533

Categorieën Home & Garden, Motorcycle & Powersports, Accessoires, Tie- Downs,

Combineer met de Raider 1/2 crankplaat (CRP-1213) en spanstang (TDB-1210); elk afzonderlijk verkocht. 1/2 doorsnee. Makkelijke installatie. Ideaal voor op reis om uw sneeuwscooter op zijn plaats te houden. Zware stalen constructie voor langdurige duurzaamheid.
Brand Raider
Brand ‎Raider
Color Black
Color ‎Black
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 241 ratings 4.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Fastener Material ‎Stainless Steel
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item model number ‎TDB-1211
Item Weight ‎7.4 ounces
Manufacturer ‎Raider
Manufacturer Part Number ‎TDB-1211
Material Alloy Steel
Material ‎Alloy Steel
Model ‎TDB-1211
Number of Pieces ‎1
Product Dimensions ‎8.25 x 0.5 x 0.5 inches
Size 1/2"
Size ‎1/2"
Vehicle Service Type all-terrain-vehicles; utility-vehicles; off-road-motorcycles; street-sport-motorcycles; street-cruiser-motorcycles; street-touring-motorcycles; street-motor-scooters; snowmobiles; marine-personal-craft See more
Vehicle Service Type ‎all-terrain-vehicles; utility-vehicles; off-road-motorcycles; street-sport-motorcycles; street-cruiser-motorcycles; street-touring-motorcycles; street-motor-scooters; snowmobiles; marine-personal-craft

3.4

13 Review
5 Star
70
4 Star
11
3 Star
12
2 Star
1
1 Star
5

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met*

Scritto da: Kathleen Martin
as advertised
Made well, item as pictured, happy with
Scritto da: Jim
Good, but could be better
They do what they’re supposed to do, but they should be probably at least a 1/2” longer and should come with a washer because they do wear into the tie downs being steel on aluminum.
Scritto da: David Jameson
Fit perfectly!
Robust construction and a perfect fit. Very strong. Be sure to get the right sized bolt - The ones I’ve seen are from three eights to five eights. This one was a five eights inch bolt. Standard thread. Fit perfectly.
Scritto da: Raymond Frechette
As advertised!
Perfectly matched my need! Luckily I did not install the bolt before receiving the tie down. You have to make sure that you have the right screw threads. There should be no issue if you buy Raider 1/2 Inch Snowmobile Trailer Tie Down Bolt.
Scritto da: AARON W BESEMER
Fast shipping
Very easy and fast transaction, quality product.
Scritto da: Scott K
Impressed
This replaced one with a knob and I don't miss it. With a gloved hand a knob is not needed. It starts, threads better than the old one. After using it one time I found I could crank it smoothly and keep the threaded end straight up and down. After the second time I found it faster to crank than the one with the knob. And it is easier to tighten during those final turns.
Scritto da: Puddels
They work good
They work great but if I had to do it again I would buy they 5/16 ones I have bent the crakes once already
Scritto da: Don Campbell
Exactly what was prot
Didn’t use wrong size but would have worked properly.
Scritto da: Wes Allin
Too Short if Hold Down is square Tubing
It’s a bit short for square tube hold down. Consider the thickness of your hold down and deck thickness. Machine had to be in the perfect spot for threads to just barely grab. Had to modify. 1 inch longer and it would have gotten a better review.
Scritto da: joel
excellent
nouvelle installation pour motoneige
Scritto da: Brad Bullas
Item as Described
Item was well packaged, had a good finish and worked well.
Scritto da: Terry Ritz
Wrong size bolt dimension now need different mount
Snowmobile trailer bolt but was too large for previous hole mount
Scritto da: Larry Duquette
Very awkward to use
To small and awkward to use

Gerelateerde producten

Ontdek ons ​​internationale netwerk

We verzenden naar 28 landen, meer dan 200.000 producten. Blijf op de hoogte, schrijf je in voor de nieuwsbrief.

Array