Rain Bird TC/1PKS Druppelirrigatieslangensnijder, snijdt alle maten druppelbuizen tot 3/4" combislangensnijder - 1/4 & 1/2

Brand:Rain Bird

3.4/5

€
43.09

PRODUCTBESCHRIJVING Rain Bird TC/1PKS Druppelirrigatieslangensnijder, snijdt alle maten druppelbuizen tot 3/4". Deze hoogwaardige slangensnijder snijdt gemakkelijk alle maten druppelslangen om te voldoen aan de unieke behoeften van uw sprinkler- en irrigatiesysteem. Zorgt voor zuivere sneden zonder gekartelde randen of beknelling van slangen. Vlijmscherp roestvrijstalen mes snijdt snel en netjes voor snellere installaties. Uniek ontwerp biedt twee putjes van verschillende grootte (één voor 1/2 tot 3/4 slang en één voor 1/4 slang) waardoor er meer hefboomwerking is, zodat er minder kracht nodig is om slangen door te snijden! Lichtgewicht maar stevige constructie. De ergonomische handgreep doet ook dienst als sleuvenfrees om slangen in mulch of losse grond te begraven. Geweldig voor het snijden van LPDE-buizen, vinylbuizen, druppelirrigatiebuizen, soaker-slangen, doorzichtige vinylbuizen (CVT) en andere zachte buizen tot een buitendiameter van 0,750 inch. De goed zichtbare paarse kleur zorgt ervoor dat het gereedschap goed zichtbaar is in gras, aarde, schors etc. Handige plastic zak bevat (1) buizensnijder. Vervangend mes kan afzonderlijk worden aangeschaft: PPC-200XBLD. Rain Bird “Het intelligente gebruik van water” VAN DE FABRIKANT Rain Bird Corporation is een particulier bedrijf dat in 1933 werd opgericht tijdens de hoogconjunctuur in de landbouw in Californië. We worden erkend als de nummer 1 fabrikant en leverancier van irrigatieproducten en -diensten ter wereld. Met verkoopkantoren over de hele wereld; we bieden meer dan 4.000 waterbesparende irrigatieproducten in meer dan 130 landen. Vanaf het allereerste begin heeft Rain Bird het breedste assortiment hoogwaardige irrigatieproducten in de branche geproduceerd en aangeboden voor: boerderijen, golfbanen, sportarena's, commerciële ontwikkelingen en woningen. In de afgelopen 80 jaar heeft Rain Bird wereldwijd meer dan 450 patenten ontvangen. Waaronder de eerste voor irrigatie in 1935 voor onze originele sproeier met slagaandrijving (Amerikaans octrooi nr. 1.997.901), die een revolutie teweegbracht in de productie van landbouwproducten en wereldwijd een nieuw tijdperk inluidde voor irrigatie. In 1990 werd deze originele slagsproeier door de American Society of Agricultural Engineers aangewezen als historisch monument. Onze producten dekken alle aspecten van irrigatie... timers/controllers, pop-up roterende sproeiers, pop-up sproeikoppen, sproeikoppen, irrigatiekleppen, druppelirrigatie, drainage en nog veel meer. Deze producten zijn allemaal wereldwijd gekozen en geïnstalleerd in de grootste en meest prestigieuze projecten voor residentiële, commerciële, agrarische en golfbaanirrigatie. Rain Bird zet zich in voor The Intelligent Use of Water™, waarbij onze toewijding verder gaat dan producten, maar ook onderwijs, training en diensten voor de industrie en de gemeenschap. Het is onze erfenis om alleen producten van de hoogste waarde en kwaliteit te ontwerpen en te vervaardigen. We zijn dankbaar dat we talrijke erkenningsprijzen hebben ontvangen van veel van onze gewaardeerde partners. Rain Bird “Het intelligente gebruik van water

Hoeveelheid

Voeg toe aan winkelkar Koop nu

EAN: 0077985002374

Categorieën Patio, Lawn & Garden, Tuinieren & Gazononderhoud, Watergeefapparatuur, Automatic Irrigation Equipment, Irrigatieslangen,

Gebruik voor snelle installatie. Ergonomische handgreep. Snijdt infuusslangen door. Roestvrijstalen mes. Door de goed zichtbare paarse kleur is het gereedschap goed zichtbaar in gras, aarde, schors, mulch enz. Zorgt voor een snellere en eenvoudigere installatie van het druppelsysteem. Beschikt over verzonken putten die minder hefboomwerking en kracht vereisen. Vlijmscherp mes van roestvrij staal en ergonomisch handvat. Werkt op alle merken 1/4 tot 3/4 druppelirrigatieslangen. Hoogwaardig lichtgewicht snijgereedschap; maakt zuivere sneden zonder gekartelde randen of beknelling van buizen.

Country of Origin	Canada
Customer Reviews	4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	TC/1PKS
Item Weight	1.6 ounces
Manufacturer	Rain Bird
Product Dimensions	20.5 x 20.5 x 4.25 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schrijf je beoordeling

Uw e-mail wordt niet gepubliceerd. Alle verplichte velden zijn gemarkeerd met^*

Uw beoordeling

Scritto da: Sandra

made my job easier

it made my job easier

Scritto da: Angel Douglas

Very small so dont lose it, worked good for what It was needed for

I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.

Scritto da: JS

Slow shipping.

Works great

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Flamsteed

I needed his

I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.

Scritto da: JNK

Blade works great, hole punch not so much

The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.

Scritto da: Saeng Fio Chao

Great handy tool

With all others tool, I find this is the best one

Scritto da: Ed

Don't forget the tool!

I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.

Scritto da: Annette Dreger

Very easy to use

Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!

Scritto da: Amazon Customer

retour imposible

J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item

Scritto da: DP Kindle Customer

It works!!

Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!

Scritto da: rferraro

Product description is misleading

I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....